Module functions¶

sqlite3.connect(database, timeout=5.0, detect_types=0, isolation_level='DEFERRED', check_same_thread=True, factory=sqlite3.Connection, cached_statements=128, uri=False, *, autocommit=sqlite3.LEGACY_TRANSACTION_CONTROL)¶

Open a connection to an SQLite database.

Parameters:

• database (path-like object) – The path to the database file to be opened. You can pass ":memory:" to create an SQLite database existing only in memory, and open a connection to it.

• timeout (float) – How many seconds the connection should wait before raising an OperationalError when a table is locked. If another connection opens a transaction to modify a table, that table will be locked until the transaction is committed. Default five seconds.

• detect_types (int) – Control whether and how data types not natively supported by SQLite are looked up to be converted to Python types, using the converters registered with register_converter(). Set it to any combination (using |, bitwise or) of PARSE_DECLTYPES and PARSE_COLNAMES to enable this. Column names takes precedence over declared types if both flags are set. By default (0), type detection is disabled.

• isolation_level (str | None) – Control legacy transaction handling behaviour. See Connection.isolation_level and Transaction control via the isolation_level attribute for more information. Can be "DEFERRED" (default), "EXCLUSIVE" or "IMMEDIATE"; or None to disable opening transactions implicitly. Has no effect unless Connection.autocommit is set to LEGACY_TRANSACTION_CONTROL (the default).

• check_same_thread (bool) – If True (default), ProgrammingError will be raised if the database connection is used by a thread other than the one that created it. If False, the connection may be accessed in multiple threads; write operations may need to be serialized by the user to avoid data corruption. See threadsafety for more information.

• factory (Connection) – A custom subclass of Connection to create the connection with, if not the default Connection class.

• cached_statements (int) – The number of statements that sqlite3 should internally cache for this connection, to avoid parsing overhead. By default, 128 statements.

• uri (bool) – If set to True, database is interpreted as a URI with a file path and an optional query string. The scheme part must be "file:", and the path can be relative or absolute. The query string allows passing parameters to SQLite, enabling various How to work with SQLite URIs.

• autocommit (bool) – Control PEP 249 transaction handling behaviour. See Connection.autocommit and Transaction control via the autocommit attribute for more information. autocommit currently defaults to LEGACY_TRANSACTION_CONTROL. The default will change to False in a future Python release.

Return type:

Connection

Raises an auditing event sqlite3.connect with argument database.

Raises an auditing event sqlite3.connect/handle with argument connection_handle.

Changed in version 3.4: Added the uri parameter.

Changed in version 3.7: database can now also be a path-like object, not only a string.

Changed in version 3.10: Added the sqlite3.connect/handle auditing event.

Changed in version 3.12: Added the autocommit parameter.

sqlite3.complete_statement(statement)¶

Return True if the string statement appears to contain one or more complete SQL statements. No syntactic verification or parsing of any kind is performed, other than checking that there are no unclosed string literals and the statement is terminated by a semicolon.

For example:

>>> sqlite3.complete_statement("SELECT foo FROM bar;")
True
>>> sqlite3.complete_statement("SELECT foo")
False

This function may be useful during command-line input to determine if the entered text seems to form a complete SQL statement, or if additional input is needed before calling execute().

See runsource() in Lib/sqlite3/__main__.py for real-world use.

sqlite3.enable_callback_tracebacks(flag, /)¶

Enable or disable callback tracebacks. By default you will not get any tracebacks in user-defined functions, aggregates, converters, authorizer callbacks etc. If you want to debug them, you can call this function with flag set to True. Afterwards, you will get tracebacks from callbacks on sys.stderr. Use False to disable the feature again.

Note

Errors in user-defined function callbacks are logged as unraisable exceptions. Use an unraisable hook handler for introspection of the failed callback.

sqlite3.register_adapter(type, adapter, /)¶

Register an adapter callable to adapt the Python type type into an SQLite type. The adapter is called with a Python object of type type as its sole argument, and must return a value of a type that SQLite natively understands.

sqlite3.register_converter(typename, converter, /)¶

Register the converter callable to convert SQLite objects of type typename into a Python object of a specific type. The converter is invoked for all SQLite values of type typename; it is passed a bytes object and should return an object of the desired Python type. Consult the parameter detect_types of connect() for information regarding how type detection works.

Note: typename and the name of the type in your query are matched case-insensitively.

Module constants¶

sqlite3.LEGACY_TRANSACTION_CONTROL¶

Set autocommit to this constant to select old style (pre-Python 3.12) transaction control behaviour. See Transaction control via the isolation_level attribute for more information.

sqlite3.PARSE_DECLTYPES¶

Pass this flag value to the detect_types parameter of connect() to look up a converter function using the declared types for each column. The types are declared when the database table is created. sqlite3 will look up a converter function using the first word of the declared type as the converter dictionary key. For example:

CREATE TABLE test(
   i integer primary key,  ! will look up a converter named "integer"
   p point,                ! will look up a converter named "point"
   n number(10)            ! will look up a converter named "number"
 )

This flag may be combined with PARSE_COLNAMES using the | (bitwise or) operator.

Note

Generated fields (for example MAX(p)) are returned as str. Use PARSE_COLNAMES to enforce types for such queries.

sqlite3.PARSE_COLNAMES¶

Pass this flag value to the detect_types parameter of connect() to look up a converter function by using the type name, parsed from the query column name, as the converter dictionary key. The query column name must be wrapped in double quotes (") and the type name must be wrapped in square brackets ([]).

SELECT MAX(p) as "p [point]" FROM test;  ! will look up converter "point"

This flag may be combined with PARSE_DECLTYPES using the | (bitwise or) operator.

sqlite3.SQLITE_OK¶

sqlite3.SQLITE_DENY¶

sqlite3.SQLITE_IGNORE¶

Flags that should be returned by the authorizer_callback callable passed to Connection.set_authorizer(), to indicate whether:

• Access is allowed (SQLITE_OK),

• The SQL statement should be aborted with an error (SQLITE_DENY)

• The column should be treated as a NULL value (SQLITE_IGNORE)

sqlite3.apilevel¶

String constant stating the supported DB-API level. Required by the DB-API. Hard-coded to "2.0".

sqlite3.paramstyle¶

String constant stating the type of parameter marker formatting expected by the sqlite3 module. Required by the DB-API. Hard-coded to "qmark".

Note

The named DB-API parameter style is also supported.

sqlite3.sqlite_version¶

Version number of the runtime SQLite library as a string.

sqlite3.sqlite_version_info¶

Version number of the runtime SQLite library as a tuple of integers.

sqlite3.threadsafety¶

Integer constant required by the DB-API 2.0, stating the level of thread safety the sqlite3 module supports. This attribute is set based on the default threading mode the underlying SQLite library is compiled with. The SQLite threading modes are:

1. Single-thread: In this mode, all mutexes are disabled and SQLite is unsafe to use in more than a single thread at once.

2. Multi-thread: In this mode, SQLite can be safely used by multiple threads provided that no single database connection is used simultaneously in two or more threads.

3. Serialized: In serialized mode, SQLite can be safely used by multiple threads with no restriction.

The mappings from SQLite threading modes to DB-API 2.0 threadsafety levels are as follows:

SQLite threading mode	threadsafety	SQLITE_THREADSAFE	DB-API 2.0 meaning
single-thread	0	0	Threads may not share the module
multi-thread	1	2	Threads may share the module, but not connections
serialized	3	1	Threads may share the module, connections and cursors

Changed in version 3.11: Set threadsafety dynamically instead of hard-coding it to 1.

sqlite3.version¶

Version number of this module as a string. This is not the version of the SQLite library.

Deprecated since version 3.12, will be removed in version 3.14: This constant used to reflect the version number of the pysqlite package, a third-party library which used to upstream changes to sqlite3. Today, it carries no meaning or practical value.

sqlite3.version_info¶

Version number of this module as a tuple of integers. This is not the version of the SQLite library.

Deprecated since version 3.12, will be removed in version 3.14: This constant used to reflect the version number of the pysqlite package, a third-party library which used to upstream changes to sqlite3. Today, it carries no meaning or practical value.

sqlite3.SQLITE_DBCONFIG_DEFENSIVE¶

sqlite3.SQLITE_DBCONFIG_DQS_DDL¶

sqlite3.SQLITE_DBCONFIG_DQS_DML¶

sqlite3.SQLITE_DBCONFIG_ENABLE_FKEY¶

sqlite3.SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER¶

sqlite3.SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION¶

sqlite3.SQLITE_DBCONFIG_ENABLE_QPSG¶

sqlite3.SQLITE_DBCONFIG_ENABLE_TRIGGER¶

sqlite3.SQLITE_DBCONFIG_ENABLE_VIEW¶

sqlite3.SQLITE_DBCONFIG_LEGACY_ALTER_TABLE¶

sqlite3.SQLITE_DBCONFIG_LEGACY_FILE_FORMAT¶

sqlite3.SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE¶

sqlite3.SQLITE_DBCONFIG_RESET_DATABASE¶

sqlite3.SQLITE_DBCONFIG_TRIGGER_EQP¶

sqlite3.SQLITE_DBCONFIG_TRUSTED_SCHEMA¶

sqlite3.SQLITE_DBCONFIG_WRITABLE_SCHEMA¶

These constants are used for the Connection.setconfig() and getconfig() methods.

The availability of these constants varies depending on the version of SQLite Python was compiled with.

Added in version 3.12.

See also

https://www.sqlite.org/c3ref/c_dbconfig_defensive.html

SQLite docs: Database Connection Configuration Options

Connection objects¶

class sqlite3.Connection¶

Each open SQLite database is represented by a Connection object, which is created using sqlite3.connect(). Their main purpose is creating Cursor objects, and Transaction control.

See also

• How to use connection shortcut methods

• How to use the connection context manager

An SQLite database connection has the following attributes and methods:

cursor(factory=Cursor)¶

Create and return a Cursor object. The cursor method accepts a single optional parameter factory. If supplied, this must be a callable returning an instance of Cursor or its subclasses.

blobopen(table, column, row, /, *, readonly=False, name='main')¶

Open a Blob handle to an existing BLOB.

Parameters:

• table (str) – The name of the table where the blob is located.

• column (str) – The name of the column where the blob is located.

• row (str) – The name of the row where the blob is located.

• readonly (bool) – Set to True if the blob should be opened without write permissions. Defaults to False.

• name (str) – The name of the database where the blob is located. Defaults to "main".

Raises:

OperationalError – When trying to open a blob in a WITHOUT ROWID table.

Return type:

Blob

Note

The blob size cannot be changed using the Blob class. Use the SQL function zeroblob to create a blob with a fixed size.

Added in version 3.11.

commit()¶

Commit any pending transaction to the database. If autocommit is True, or there is no open transaction, this method does nothing. If autocommit is False, a new transaction is implicitly opened if a pending transaction was committed by this method.

rollback()¶

Roll back to the start of any pending transaction. If autocommit is True, or there is no open transaction, this method does nothing. If autocommit is False, a new transaction is implicitly opened if a pending transaction was rolled back by this method.

close()¶

Close the database connection. If autocommit is False, any pending transaction is implicitly rolled back. If autocommit is True or LEGACY_TRANSACTION_CONTROL, no implicit transaction control is executed. Make sure to commit() before closing to avoid losing pending changes.

execute(sql, parameters=(), /)¶

Create a new Cursor object and call execute() on it with the given sql and parameters. Return the new cursor object.

executemany(sql, parameters, /)¶

Create a new Cursor object and call executemany() on it with the given sql and parameters. Return the new cursor object.

executescript(sql_script, /)¶

Create a new Cursor object and call executescript() on it with the given sql_script. Return the new cursor object.

create_function(name, narg, func, *, deterministic=False)¶

Create or remove a user-defined SQL function.

Parameters:

• name (str) – The name of the SQL function.

• narg (int) – The number of arguments the SQL function can accept. If -1, it may take any number of arguments.

• func (callback | None) – A callable that is called when the SQL function is invoked. The callable must return a type natively supported by SQLite. Set to None to remove an existing SQL function.

• deterministic (bool) – If True, the created SQL function is marked as deterministic, which allows SQLite to perform additional optimizations.

Raises:

NotSupportedError – If deterministic is used with SQLite versions older than 3.8.3.

Changed in version 3.8: Added the deterministic parameter.

Example:

>>> import hashlib
>>> def md5sum(t):
...     return hashlib.md5(t).hexdigest()
>>> con = sqlite3.connect(":memory:")
>>> con.create_function("md5", 1, md5sum)
>>> for row in con.execute("SELECT md5(?)", (b"foo",)):
...     print(row)
('acbd18db4cc2f85cedef654fccc4a4d8',)
>>> con.close()

create_aggregate(name, n_arg, aggregate_class)¶

Create or remove a user-defined SQL aggregate function.

Parameters:

• name (str) – The name of the SQL aggregate function.

• n_arg (int) – The number of arguments the SQL aggregate function can accept. If -1, it may take any number of arguments.

• aggregate_class (class | None) –

  A class must implement the following methods:

  • step(): Add a row to the aggregate.

  • finalize(): Return the final result of the aggregate as a type natively supported by SQLite.

  The number of arguments that the step() method must accept is controlled by n_arg.

  Set to None to remove an existing SQL aggregate function.

Example:

class MySum:
    def __init__(self):
        self.count = 0

    def step(self, value):
        self.count += value

    def finalize(self):
        return self.count

con = sqlite3.connect(":memory:")
con.create_aggregate("mysum", 1, MySum)
cur = con.execute("CREATE TABLE test(i)")
cur.execute("INSERT INTO test(i) VALUES(1)")
cur.execute("INSERT INTO test(i) VALUES(2)")
cur.execute("SELECT mysum(i) FROM test")
print(cur.fetchone()[0])

con.close()

create_window_function(name, num_params, aggregate_class, /)¶

Create or remove a user-defined aggregate window function.

Parameters:

• name (str) – The name of the SQL aggregate window function to create or remove.

• num_params (int) – The number of arguments the SQL aggregate window function can accept. If -1, it may take any number of arguments.

• aggregate_class (class | None) –

  A class that must implement the following methods:

  • step(): Add a row to the current window.

  • value(): Return the current value of the aggregate.

  • inverse(): Remove a row from the current window.

  • finalize(): Return the final result of the aggregate as a type natively supported by SQLite.

  The number of arguments that the step() and value() methods must accept is controlled by num_params.

  Set to None to remove an existing SQL aggregate window function.

Raises:

NotSupportedError – If used with a version of SQLite older than 3.25.0, which does not support aggregate window functions.

Added in version 3.11.

Example:

# Example taken from https://www.sqlite.org/windowfunctions.html#udfwinfunc
class WindowSumInt:
    def __init__(self):
        self.count = 0

    def step(self, value):
        """Add a row to the current window."""
        self.count += value

    def value(self):
        """Return the current value of the aggregate."""
        return self.count

    def inverse(self, value):
        """Remove a row from the current window."""
        self.count -= value

    def finalize(self):
        """Return the final value of the aggregate.

        Any clean-up actions should be placed here.
        """
        return self.count


con = sqlite3.connect(":memory:")
cur = con.execute("CREATE TABLE test(x, y)")
values = [
    ("a", 4),
    ("b", 5),
    ("c", 3),
    ("d", 8),
    ("e", 1),
]
cur.executemany("INSERT INTO test VALUES(?, ?)", values)
con.create_window_function("sumint", 1, WindowSumInt)
cur.execute("""
    SELECT x, sumint(y) OVER (
        ORDER BY x ROWS BETWEEN 1 PRECEDING AND 1 FOLLOWING
    ) AS sum_y
    FROM test ORDER BY x
""")
print(cur.fetchall())
con.close()

create_collation(name, callable, /)¶

Create a collation named name using the collating function callable. callable is passed two string arguments, and it should return an integer:

• 1 if the first is ordered higher than the second

• -1 if the first is ordered lower than the second

• 0 if they are ordered equal

The following example shows a reverse sorting collation:

def collate_reverse(string1, string2):
    if string1 == string2:
        return 0
    elif string1 < string2:
        return 1
    else:
        return -1

con = sqlite3.connect(":memory:")
con.create_collation("reverse", collate_reverse)

cur = con.execute("CREATE TABLE test(x)")
cur.executemany("INSERT INTO test(x) VALUES(?)", [("a",), ("b",)])
cur.execute("SELECT x FROM test ORDER BY x COLLATE reverse")
for row in cur:
    print(row)
con.close()

Remove a collation function by setting callable to None.

Changed in version 3.11: The collation name can contain any Unicode character. Earlier, only ASCII characters were allowed.

interrupt()¶

Call this method from a different thread to abort any queries that might be executing on the connection. Aborted queries will raise an OperationalError.

set_authorizer(authorizer_callback)¶

Register callable authorizer_callback to be invoked for each attempt to access a column of a table in the database. The callback should return one of SQLITE_OK, SQLITE_DENY, or SQLITE_IGNORE to signal how access to the column should be handled by the underlying SQLite library.

The first argument to the callback signifies what kind of operation is to be authorized. The second and third argument will be arguments or None depending on the first argument. The 4th argument is the name of the database (“main”, “temp”, etc.) if applicable. The 5th argument is the name of the inner-most trigger or view that is responsible for the access attempt or None if this access attempt is directly from input SQL code.

Please consult the SQLite documentation about the possible values for the first argument and the meaning of the second and third argument depending on the first one. All necessary constants are available in the sqlite3 module.

Passing None as authorizer_callback will disable the authorizer.

Changed in version 3.11: Added support for disabling the authorizer using None.

set_progress_handler(progress_handler, n)¶

Register callable progress_handler to be invoked for every n instructions of the SQLite virtual machine. This is useful if you want to get called from SQLite during long-running operations, for example to update a GUI.

If you want to clear any previously installed progress handler, call the method with None for progress_handler.

Returning a non-zero value from the handler function will terminate the currently executing query and cause it to raise a DatabaseError exception.

set_trace_callback(trace_callback)¶

Register callable trace_callback to be invoked for each SQL statement that is actually executed by the SQLite backend.

The only argument passed to the callback is the statement (as str) that is being executed. The return value of the callback is ignored. Note that the backend does not only run statements passed to the Cursor.execute() methods. Other sources include the transaction management of the sqlite3 module and the execution of triggers defined in the current database.

Passing None as trace_callback will disable the trace callback.

Note

Exceptions raised in the trace callback are not propagated. As a development and debugging aid, use enable_callback_tracebacks() to enable printing tracebacks from exceptions raised in the trace callback.

Added in version 3.3.

enable_load_extension(enabled, /)¶

Enable the SQLite engine to load SQLite extensions from shared libraries if enabled is True; else, disallow loading SQLite extensions. SQLite extensions can define new functions, aggregates or whole new virtual table implementations. One well-known extension is the fulltext-search extension distributed with SQLite.

Note

The sqlite3 module is not built with loadable extension support by default, because some platforms (notably macOS) have SQLite libraries which are compiled without this feature. To get loadable extension support, you must pass the --enable-loadable-sqlite-extensions option to configure.

Raises an auditing event sqlite3.enable_load_extension with arguments connection, enabled.

Added in version 3.2.

Changed in version 3.10: Added the sqlite3.enable_load_extension auditing event.

con.enable_load_extension(True)

# Load the fulltext search extension
con.execute("select load_extension('./fts3.so')")

# alternatively you can load the extension using an API call:
# con.load_extension("./fts3.so")

# disable extension loading again
con.enable_load_extension(False)

# example from SQLite wiki
con.execute("CREATE VIRTUAL TABLE recipe USING fts3(name, ingredients)")
con.executescript("""
    INSERT INTO recipe (name, ingredients) VALUES('broccoli stew', 'broccoli peppers cheese tomatoes');
    INSERT INTO recipe (name, ingredients) VALUES('pumpkin stew', 'pumpkin onions garlic celery');
    INSERT INTO recipe (name, ingredients) VALUES('broccoli pie', 'broccoli cheese onions flour');
    INSERT INTO recipe (name, ingredients) VALUES('pumpkin pie', 'pumpkin sugar flour butter');
    """)
for row in con.execute("SELECT rowid, name, ingredients FROM recipe WHERE name MATCH 'pie'"):
    print(row)

load_extension(path, /, *, entrypoint=None)¶

Load an SQLite extension from a shared library. Enable extension loading with enable_load_extension() before calling this method.

Parameters:

• path (str) – The path to the SQLite extension.

• entrypoint (str | None) – Entry point name. If None (the default), SQLite will come up with an entry point name of its own; see the SQLite docs Loading an Extension for details.

Raises an auditing event sqlite3.load_extension with arguments connection, path.

Added in version 3.2.

Changed in version 3.10: Added the sqlite3.load_extension auditing event.

Changed in version 3.12: Added the entrypoint parameter.

iterdump()¶

Return an iterator to dump the database as SQL source code. Useful when saving an in-memory database for later restoration. Similar to the .dump command in the sqlite3 shell.

Example:

# Convert file example.db to SQL dump file dump.sql
con = sqlite3.connect('example.db')
with open('dump.sql', 'w') as f:
    for line in con.iterdump():
        f.write('%s\n' % line)
con.close()

See also

How to handle non-UTF-8 text encodings

backup(target, *, pages=-1, progress=None, name='main', sleep=0.250)¶

Create a backup of an SQLite database.

Works even if the database is being accessed by other clients or concurrently by the same connection.

Parameters:

• target (Connection) – The database connection to save the backup to.

• pages (int) – The number of pages to copy at a time. If equal to or less than 0, the entire database is copied in a single step. Defaults to -1.

• progress (callback | None) – If set to a callable, it is invoked with three integer arguments for every backup iteration: the status of the last iteration, the remaining number of pages still to be copied, and the total number of pages. Defaults to None.

• name (str) – The name of the database to back up. Either "main" (the default) for the main database, "temp" for the temporary database, or the name of a custom database as attached using the ATTACH DATABASE SQL statement.

• sleep (float) – The number of seconds to sleep between successive attempts to back up remaining pages.

Example 1, copy an existing database into another:

def progress(status, remaining, total):
    print(f'Copied {total-remaining} of {total} pages...')

src = sqlite3.connect('example.db')
dst = sqlite3.connect('backup.db')
with dst:
    src.backup(dst, pages=1, progress=progress)
dst.close()
src.close()

Example 2, copy an existing database into a transient copy:

src = sqlite3.connect('example.db')
dst = sqlite3.connect(':memory:')
src.backup(dst)
dst.close()
src.close()

Added in version 3.7.

See also

How to handle non-UTF-8 text encodings

getlimit(category, /)¶

Get a connection runtime limit.

Parameters:

category (int) – The SQLite limit category to be queried.

Return type:

int

Raises:

ProgrammingError – If category is not recognised by the underlying SQLite library.

Example, query the maximum length of an SQL statement for Connection con (the default is 1000000000):

>>> con.getlimit(sqlite3.SQLITE_LIMIT_SQL_LENGTH)
1000000000

Added in version 3.11.

setlimit(category, limit, /)¶

Set a connection runtime limit. Attempts to increase a limit above its hard upper bound are silently truncated to the hard upper bound. Regardless of whether or not the limit was changed, the prior value of the limit is returned.

Parameters:

• category (int) – The SQLite limit category to be set.

• limit (int) – The value of the new limit. If negative, the current limit is unchanged.

Return type:

int

Raises:

ProgrammingError – If category is not recognised by the underlying SQLite library.

Example, limit the number of attached databases to 1 for Connection con (the default limit is 10):

>>> con.setlimit(sqlite3.SQLITE_LIMIT_ATTACHED, 1)
10
>>> con.getlimit(sqlite3.SQLITE_LIMIT_ATTACHED)
1

Added in version 3.11.

getconfig(op, /)¶

Query a boolean connection configuration option.

Parameters:

op (int) – A SQLITE_DBCONFIG code.

Return type:

bool

Added in version 3.12.

setconfig(op, enable=True, /)¶

Set a boolean connection configuration option.

Parameters:

• op (int) – A SQLITE_DBCONFIG code.

• enable (bool) – True if the configuration option should be enabled (default); False if it should be disabled.

Added in version 3.12.

serialize(*, name='main')¶

Serialize a database into a bytes object. For an ordinary on-disk database file, the serialization is just a copy of the disk file. For an in-memory database or a “temp” database, the serialization is the same sequence of bytes which would be written to disk if that database were backed up to disk.

Parameters:

name (str) – The database name to be serialized. Defaults to "main".

Return type:

bytes

Note

This method is only available if the underlying SQLite library has the serialize API.

Added in version 3.11.

deserialize(data, /, *, name='main')¶

Deserialize a serialized database into a Connection. This method causes the database connection to disconnect from database name, and reopen name as an in-memory database based on the serialization contained in data.

Parameters:

• data (bytes) – A serialized database.

• name (str) – The database name to deserialize into. Defaults to "main".

Raises:

• OperationalError – If the database connection is currently involved in a read transaction or a backup operation.

• DatabaseError – If data does not contain a valid SQLite database.

• OverflowError – If len(data) is larger than 2**63 - 1.

Note

This method is only available if the underlying SQLite library has the deserialize API.

Added in version 3.11.

autocommit¶

This attribute controls PEP 249-compliant transaction behaviour. autocommit has three allowed values:

• False: Select PEP 249-compliant transaction behaviour, implying that sqlite3 ensures a transaction is always open. Use commit() and rollback() to close transactions.

  This is the recommended value of autocommit.

• True: Use SQLite’s autocommit mode. commit() and rollback() have no effect in this mode.

• LEGACY_TRANSACTION_CONTROL: Pre-Python 3.12 (non-PEP 249-compliant) transaction control. See isolation_level for more details.

  This is currently the default value of autocommit.

Changing autocommit to False will open a new transaction, and changing it to True will commit any pending transaction.

See Transaction control via the autocommit attribute for more details.

Note

The isolation_level attribute has no effect unless autocommit is LEGACY_TRANSACTION_CONTROL.

Added in version 3.12.

in_transaction¶

This read-only attribute corresponds to the low-level SQLite autocommit mode.

True if a transaction is active (there are uncommitted changes), False otherwise.

Added in version 3.2.

isolation_level¶

Controls the legacy transaction handling mode of sqlite3. If set to None, transactions are never implicitly opened. If set to one of "DEFERRED", "IMMEDIATE", or "EXCLUSIVE", corresponding to the underlying SQLite transaction behaviour, implicit transaction management is performed.

If not overridden by the isolation_level parameter of connect(), the default is "", which is an alias for "DEFERRED".

Note

Using autocommit to control transaction handling is recommended over using isolation_level. isolation_level has no effect unless autocommit is set to LEGACY_TRANSACTION_CONTROL (the default).

row_factory¶

The initial row_factory for Cursor objects created from this connection. Assigning to this attribute does not affect the row_factory of existing cursors belonging to this connection, only new ones. Is None by default, meaning each row is returned as a tuple.

See How to create and use row factories for more details.

text_factory¶

A callable that accepts a bytes parameter and returns a text representation of it. The callable is invoked for SQLite values with the TEXT data type. By default, this attribute is set to str.

See How to handle non-UTF-8 text encodings for more details.

total_changes¶

Return the total number of database rows that have been modified, inserted, or deleted since the database connection was opened.

Cursor objects¶

A Cursor object represents a database cursor which is used to execute SQL statements, and manage the context of a fetch operation. Cursors are created using Connection.cursor(), or by using any of the connection shortcut methods.

Cursor objects are iterators, meaning that if you execute() a SELECT query, you can simply iterate over the cursor to fetch the resulting rows:

for row in cur.execute("SELECT t FROM data"):
    print(row)

class sqlite3.Cursor¶

A Cursor instance has the following attributes and methods.

execute(sql, parameters=(), /)¶

Execute a single SQL statement, optionally binding Python values using placeholders.

Parameters:

• sql (str) – A single SQL statement.

• parameters (dict | sequence) – Python values to bind to placeholders in sql. A dict if named placeholders are used. A sequence if unnamed placeholders are used. See How to use placeholders to bind values in SQL queries.

Raises:

ProgrammingError – If sql contains more than one SQL statement.

If autocommit is LEGACY_TRANSACTION_CONTROL, isolation_level is not None, sql is an INSERT, UPDATE, DELETE, or REPLACE statement, and there is no open transaction, a transaction is implicitly opened before executing sql.

Deprecated since version 3.12, will be removed in version 3.14: DeprecationWarning is emitted if named placeholders are used and parameters is a sequence instead of a dict. Starting with Python 3.14, ProgrammingError will be raised instead.

Use executescript() to execute multiple SQL statements.

executemany(sql, parameters, /)¶

For every item in parameters, repeatedly execute the parameterized DML SQL statement sql.

Uses the same implicit transaction handling as execute().

Parameters:

• sql (str) – A single SQL DML statement.

• parameters (iterable) – An iterable of parameters to bind with the placeholders in sql. See How to use placeholders to bind values in SQL queries.

Raises:

ProgrammingError – If sql contains more than one SQL statement, or is not a DML statement.

Example:

rows = [
    ("row1",),
    ("row2",),
]
# cur is an sqlite3.Cursor object
cur.executemany("INSERT INTO data VALUES(?)", rows)

Note

Any resulting rows are discarded, including DML statements with RETURNING clauses.

Deprecated since version 3.12, will be removed in version 3.14: DeprecationWarning is emitted if named placeholders are used and the items in parameters are sequences instead of dicts. Starting with Python 3.14, ProgrammingError will be raised instead.

executescript(sql_script, /)¶

Execute the SQL statements in sql_script. If the autocommit is LEGACY_TRANSACTION_CONTROL and there is a pending transaction, an implicit COMMIT statement is executed first. No other implicit transaction control is performed; any transaction control must be added to sql_script.

sql_script must be a string.

Example:

# cur is an sqlite3.Cursor object
cur.executescript("""
    BEGIN;
    CREATE TABLE person(firstname, lastname, age);
    CREATE TABLE book(title, author, published);
    CREATE TABLE publisher(name, address);
    COMMIT;
""")

fetchone()¶

If row_factory is None, return the next row query result set as a tuple. Else, pass it to the row factory and return its result. Return None if no more data is available.

fetchmany(size=cursor.arraysize)¶

Return the next set of rows of a query result as a list. Return an empty list if no more rows are available.

The number of rows to fetch per call is specified by the size parameter. If size is not given, arraysize determines the number of rows to be fetched. If fewer than size rows are available, as many rows as are available are returned.

Note there are performance considerations involved with the size parameter. For optimal performance, it is usually best to use the arraysize attribute. If the size parameter is used, then it is best for it to retain the same value from one fetchmany() call to the next.

fetchall()¶

Return all (remaining) rows of a query result as a list. Return an empty list if no rows are available. Note that the arraysize attribute can affect the performance of this operation.

close()¶

Close the cursor now (rather than whenever __del__ is called).

The cursor will be unusable from this point forward; a ProgrammingError exception will be raised if any operation is attempted with the cursor.

setinputsizes(sizes, /)¶

Required by the DB-API. Does nothing in sqlite3.

setoutputsize(size, column=None, /)¶

Required by the DB-API. Does nothing in sqlite3.

arraysize¶

Read/write attribute that controls the number of rows returned by fetchmany(). The default value is 1 which means a single row would be fetched per call.

connection¶

Read-only attribute that provides the SQLite database Connection belonging to the cursor. A Cursor object created by calling con.cursor() will have a connection attribute that refers to con:

>>> con = sqlite3.connect(":memory:")
>>> cur = con.cursor()
>>> cur.connection == con
True
>>> con.close()

description¶

Read-only attribute that provides the column names of the last query. To remain compatible with the Python DB API, it returns a 7-tuple for each column where the last six items of each tuple are None.

It is set for SELECT statements without any matching rows as well.

lastrowid¶

Read-only attribute that provides the row id of the last inserted row. It is only updated after successful INSERT or REPLACE statements using the execute() method. For other statements, after executemany() or executescript(), or if the insertion failed, the value of lastrowid is left unchanged. The initial value of lastrowid is None.

Note

Inserts into WITHOUT ROWID tables are not recorded.

Changed in version 3.6: Added support for the REPLACE statement.

rowcount¶

Read-only attribute that provides the number of modified rows for INSERT, UPDATE, DELETE, and REPLACE statements; is -1 for other statements, including CTE queries. It is only updated by the execute() and executemany() methods, after the statement has run to completion. This means that any resulting rows must be fetched in order for rowcount to be updated.

row_factory¶

Control how a row fetched from this Cursor is represented. If None, a row is represented as a tuple. Can be set to the included sqlite3.Row; or a callable that accepts two arguments, a Cursor object and the tuple of row values, and returns a custom object representing an SQLite row.

Defaults to what Connection.row_factory was set to when the Cursor was created. Assigning to this attribute does not affect Connection.row_factory of the parent connection.

See How to create and use row factories for more details.

Row objects¶

class sqlite3.Row¶

A Row instance serves as a highly optimized row_factory for Connection objects. It supports iteration, equality testing, len(), and mapping access by column name and index.

Two Row objects compare equal if they have identical column names and values.

See How to create and use row factories for more details.

keys()¶

Return a list of column names as strings. Immediately after a query, it is the first member of each tuple in Cursor.description.

Changed in version 3.5: Added support of slicing.

Blob objects¶

class sqlite3.Blob¶

Added in version 3.11.

A Blob instance is a file-like object that can read and write data in an SQLite BLOB. Call len(blob) to get the size (number of bytes) of the blob. Use indices and slices for direct access to the blob data.

Use the Blob as a context manager to ensure that the blob handle is closed after use.

con = sqlite3.connect(":memory:")
con.execute("CREATE TABLE test(blob_col blob)")
con.execute("INSERT INTO test(blob_col) VALUES(zeroblob(13))")

# Write to our blob, using two write operations:
with con.blobopen("test", "blob_col", 1) as blob:
    blob.write(b"hello, ")
    blob.write(b"world.")
    # Modify the first and last bytes of our blob
    blob[0] = ord("H")
    blob[-1] = ord("!")

# Read the contents of our blob
with con.blobopen("test", "blob_col", 1) as blob:
    greeting = blob.read()

print(greeting)  # outputs "b'Hello, world!'"
con.close()

close()¶

Close the blob.

The blob will be unusable from this point onward. An Error (or subclass) exception will be raised if any further operation is attempted with the blob.

read(length=-1, /)¶

Read length bytes of data from the blob at the current offset position. If the end of the blob is reached, the data up to EOF will be returned. When length is not specified, or is negative, read() will read until the end of the blob.

write(data, /)¶

Write data to the blob at the current offset. This function cannot change the blob length. Writing beyond the end of the blob will raise ValueError.

tell()¶

Return the current access position of the blob.

seek(offset, origin=os.SEEK_SET, /)¶

Set the current access position of the blob to offset. The origin argument defaults to os.SEEK_SET (absolute blob positioning). Other values for origin are os.SEEK_CUR (seek relative to the current position) and os.SEEK_END (seek relative to the blob’s end).

PrepareProtocol objects¶

class sqlite3.PrepareProtocol¶

The PrepareProtocol type’s single purpose is to act as a PEP 246 style adaption protocol for objects that can adapt themselves to native SQLite types.

Exceptions¶

The exception hierarchy is defined by the DB-API 2.0 (PEP 249).

exception sqlite3.Warning¶

This exception is not currently raised by the sqlite3 module, but may be raised by applications using sqlite3, for example if a user-defined function truncates data while inserting. Warning is a subclass of Exception.

exception sqlite3.Error¶

The base class of the other exceptions in this module. Use this to catch all errors with one single except statement. Error is a subclass of Exception.

If the exception originated from within the SQLite library, the following two attributes are added to the exception:

sqlite_errorcode¶

The numeric error code from the SQLite API

Added in version 3.11.

sqlite_errorname¶

The symbolic name of the numeric error code from the SQLite API

Added in version 3.11.

exception sqlite3.InterfaceError¶

Exception raised for misuse of the low-level SQLite C API. In other words, if this exception is raised, it probably indicates a bug in the sqlite3 module. InterfaceError is a subclass of Error.

exception sqlite3.DatabaseError¶

Exception raised for errors that are related to the database. This serves as the base exception for several types of database errors. It is only raised implicitly through the specialised subclasses. DatabaseError is a subclass of Error.

exception sqlite3.DataError¶

Exception raised for errors caused by problems with the processed data, like numeric values out of range, and strings which are too long. DataError is a subclass of DatabaseError.

exception sqlite3.OperationalError¶

Exception raised for errors that are related to the database’s operation, and not necessarily under the control of the programmer. For example, the database path is not found, or a transaction could not be processed. OperationalError is a subclass of DatabaseError.

exception sqlite3.IntegrityError¶

Exception raised when the relational integrity of the database is affected, e.g. a foreign key check fails. It is a subclass of DatabaseError.

exception sqlite3.InternalError¶

Exception raised when SQLite encounters an internal error. If this is raised, it may indicate that there is a problem with the runtime SQLite library. InternalError is a subclass of DatabaseError.

exception sqlite3.ProgrammingError¶

Exception raised for sqlite3 API programming errors, for example supplying the wrong number of bindings to a query, or trying to operate on a closed Connection. ProgrammingError is a subclass of DatabaseError.

exception sqlite3.NotSupportedError¶

Exception raised in case a method or database API is not supported by the underlying SQLite library. For example, setting deterministic to True in create_function(), if the underlying SQLite library does not support deterministic functions. NotSupportedError is a subclass of DatabaseError.

SQLite and Python types¶

SQLite natively supports the following types: NULL, INTEGER, REAL, TEXT, BLOB.

The following Python types can thus be sent to SQLite without any problem:

This is how SQLite types are converted to Python types by default:

The type system of the sqlite3 module is extensible in two ways: you can store additional Python types in an SQLite database via object adapters, and you can let the sqlite3 module convert SQLite types to Python types via converters.

Default adapters and converters (deprecated)¶

The deprecated default adapters and converters consist of:

• An adapter for datetime.date objects to strings in ISO 8601 format.

• An adapter for datetime.datetime objects to strings in ISO 8601 format.

• A converter for declared “date” types to datetime.date objects.

• A converter for declared “timestamp” types to datetime.datetime objects. Fractional parts will be truncated to 6 digits (microsecond precision).

Command-line interface¶

The sqlite3 module can be invoked as a script, using the interpreter’s -m switch, in order to provide a simple SQLite shell. The argument signature is as follows:

python -m sqlite3 [-h] [-v] [filename] [sql]

Type .quit or CTRL-D to exit the shell.

-h, --help¶

Print CLI help.

-v, --version¶

Print underlying SQLite library version.

How to use placeholders to bind values in SQL queries¶

SQL operations usually need to use values from Python variables. However, beware of using Python’s string operations to assemble queries, as they are vulnerable to SQL injection attacks. For example, an attacker can simply close the single quote and inject OR TRUE to select all rows:

>>> # Never do this -- insecure!
>>> symbol = input()
' OR TRUE; --
>>> sql = "SELECT * FROM stocks WHERE symbol = '%s'" % symbol
>>> print(sql)
SELECT * FROM stocks WHERE symbol = '' OR TRUE; --'
>>> cur.execute(sql)

Instead, use the DB-API’s parameter substitution. To insert a variable into a query string, use a placeholder in the string, and substitute the actual values into the query by providing them as a tuple of values to the second argument of the cursor’s execute() method.

An SQL statement may use one of two kinds of placeholders: question marks (qmark style) or named placeholders (named style). For the qmark style, parameters must be a sequence whose length must match the number of placeholders, or a ProgrammingError is raised. For the named style, parameters must be an instance of a dict (or a subclass), which must contain keys for all named parameters; any extra items are ignored. Here’s an example of both styles:

con = sqlite3.connect(":memory:")
cur = con.execute("CREATE TABLE lang(name, first_appeared)")

# This is the named style used with executemany():
data = (
    {"name": "C", "year": 1972},
    {"name": "Fortran", "year": 1957},
    {"name": "Python", "year": 1991},
    {"name": "Go", "year": 2009},
)
cur.executemany("INSERT INTO lang VALUES(:name, :year)", data)

# This is the qmark style used in a SELECT query:
params = (1972,)
cur.execute("SELECT * FROM lang WHERE first_appeared = ?", params)
print(cur.fetchall())
con.close()

How to adapt custom Python types to SQLite values¶

SQLite supports only a limited set of data types natively. To store custom Python types in SQLite databases, adapt them to one of the Python types SQLite natively understands.

There are two ways to adapt Python objects to SQLite types: letting your object adapt itself, or using an adapter callable. The latter will take precedence above the former. For a library that exports a custom type, it may make sense to enable that type to adapt itself. As an application developer, it may make more sense to take direct control by registering custom adapter functions.

class Point:
    def __init__(self, x, y):
        self.x, self.y = x, y

    def __conform__(self, protocol):
        if protocol is sqlite3.PrepareProtocol:
            return f"{self.x};{self.y}"

con = sqlite3.connect(":memory:")
cur = con.cursor()

cur.execute("SELECT ?", (Point(4.0, -3.2),))
print(cur.fetchone()[0])
con.close()

class Point:
    def __init__(self, x, y):
        self.x, self.y = x, y

def adapt_point(point):
    return f"{point.x};{point.y}"

sqlite3.register_adapter(Point, adapt_point)

con = sqlite3.connect(":memory:")
cur = con.cursor()

cur.execute("SELECT ?", (Point(1.0, 2.5),))
print(cur.fetchone()[0])
con.close()

How to convert SQLite values to custom Python types¶

Writing an adapter lets you convert from custom Python types to SQLite values. To be able to convert from SQLite values to custom Python types, we use converters.

Let’s go back to the Point class. We stored the x and y coordinates separated via semicolons as strings in SQLite.

First, we’ll define a converter function that accepts the string as a parameter and constructs a Point object from it.

def convert_point(s):
    x, y = map(float, s.split(b";"))
    return Point(x, y)

We now need to tell sqlite3 when it should convert a given SQLite value. This is done when connecting to a database, using the detect_types parameter of connect(). There are three options:

• Implicit: set detect_types to PARSE_DECLTYPES

• Explicit: set detect_types to PARSE_COLNAMES

• Both: set detect_types to sqlite3.PARSE_DECLTYPES | sqlite3.PARSE_COLNAMES. Column names take precedence over declared types.

The following example illustrates the implicit and explicit approaches:

class Point:
    def __init__(self, x, y):
        self.x, self.y = x, y

    def __repr__(self):
        return f"Point({self.x}, {self.y})"

def adapt_point(point):
    return f"{point.x};{point.y}"

def convert_point(s):
    x, y = list(map(float, s.split(b";")))
    return Point(x, y)

# Register the adapter and converter
sqlite3.register_adapter(Point, adapt_point)
sqlite3.register_converter("point", convert_point)

# 1) Parse using declared types
p = Point(4.0, -3.2)
con = sqlite3.connect(":memory:", detect_types=sqlite3.PARSE_DECLTYPES)
cur = con.execute("CREATE TABLE test(p point)")

cur.execute("INSERT INTO test(p) VALUES(?)", (p,))
cur.execute("SELECT p FROM test")
print("with declared types:", cur.fetchone()[0])
cur.close()
con.close()

# 2) Parse using column names
con = sqlite3.connect(":memory:", detect_types=sqlite3.PARSE_COLNAMES)
cur = con.execute("CREATE TABLE test(p)")

cur.execute("INSERT INTO test(p) VALUES(?)", (p,))
cur.execute('SELECT p AS "p [point]" FROM test')
print("with column names:", cur.fetchone()[0])
cur.close()
con.close()

Adapter and converter recipes¶

This section shows recipes for common adapters and converters.

import datetime
import sqlite3

def adapt_date_iso(val):
    """Adapt datetime.date to ISO 8601 date."""
    return val.isoformat()

def adapt_datetime_iso(val):
    """Adapt datetime.datetime to timezone-naive ISO 8601 date."""
    return val.isoformat()

def adapt_datetime_epoch(val):
    """Adapt datetime.datetime to Unix timestamp."""
    return int(val.timestamp())

sqlite3.register_adapter(datetime.date, adapt_date_iso)
sqlite3.register_adapter(datetime.datetime, adapt_datetime_iso)
sqlite3.register_adapter(datetime.datetime, adapt_datetime_epoch)

def convert_date(val):
    """Convert ISO 8601 date to datetime.date object."""
    return datetime.date.fromisoformat(val.decode())

def convert_datetime(val):
    """Convert ISO 8601 datetime to datetime.datetime object."""
    return datetime.datetime.fromisoformat(val.decode())

def convert_timestamp(val):
    """Convert Unix epoch timestamp to datetime.datetime object."""
    return datetime.datetime.fromtimestamp(int(val))

sqlite3.register_converter("date", convert_date)
sqlite3.register_converter("datetime", convert_datetime)
sqlite3.register_converter("timestamp", convert_timestamp)

How to use connection shortcut methods¶

Using the execute(), executemany(), and executescript() methods of the Connection class, your code can be written more concisely because you don’t have to create the (often superfluous) Cursor objects explicitly. Instead, the Cursor objects are created implicitly and these shortcut methods return the cursor objects. This way, you can execute a SELECT statement and iterate over it directly using only a single call on the Connection object.

# Create and fill the table.
con = sqlite3.connect(":memory:")
con.execute("CREATE TABLE lang(name, first_appeared)")
data = [
    ("C++", 1985),
    ("Objective-C", 1984),
]
con.executemany("INSERT INTO lang(name, first_appeared) VALUES(?, ?)", data)

# Print the table contents
for row in con.execute("SELECT name, first_appeared FROM lang"):
    print(row)

print("I just deleted", con.execute("DELETE FROM lang").rowcount, "rows")

# close() is not a shortcut method and it's not called automatically;
# the connection object should be closed manually
con.close()

How to use the connection context manager¶

A Connection object can be used as a context manager that automatically commits or rolls back open transactions when leaving the body of the context manager. If the body of the with statement finishes without exceptions, the transaction is committed. If this commit fails, or if the body of the with statement raises an uncaught exception, the transaction is rolled back. If autocommit is False, a new transaction is implicitly opened after committing or rolling back.

If there is no open transaction upon leaving the body of the with statement, or if autocommit is True, the context manager does nothing.

con = sqlite3.connect(":memory:")
con.execute("CREATE TABLE lang(id INTEGER PRIMARY KEY, name VARCHAR UNIQUE)")

# Successful, con.commit() is called automatically afterwards
with con:
    con.execute("INSERT INTO lang(name) VALUES(?)", ("Python",))

# con.rollback() is called after the with block finishes with an exception,
# the exception is still raised and must be caught
try:
    with con:
        con.execute("INSERT INTO lang(name) VALUES(?)", ("Python",))
except sqlite3.IntegrityError:
    print("couldn't add Python twice")

# Connection object used as context manager only commits or rollbacks transactions,
# so the connection object should be closed manually
con.close()

How to work with SQLite URIs¶

Some useful URI tricks include:

• Open a database in read-only mode:

>>> con = sqlite3.connect("file:tutorial.db?mode=ro", uri=True)
>>> con.execute("CREATE TABLE readonly(data)")
Traceback (most recent call last):
OperationalError: attempt to write a readonly database
>>> con.close()

• Do not implicitly create a new database file if it does not already exist; will raise OperationalError if unable to create a new file:

>>> con = sqlite3.connect("file:nosuchdb.db?mode=rw", uri=True)
Traceback (most recent call last):
OperationalError: unable to open database file

• Create a shared named in-memory database:

db = "file:mem1?mode=memory&cache=shared"
con1 = sqlite3.connect(db, uri=True)
con2 = sqlite3.connect(db, uri=True)
with con1:
    con1.execute("CREATE TABLE shared(data)")
    con1.execute("INSERT INTO shared VALUES(28)")
res = con2.execute("SELECT data FROM shared")
assert res.fetchone() == (28,)

con1.close()
con2.close()

More information about this feature, including a list of parameters, can be found in the SQLite URI documentation.

How to create and use row factories¶

By default, sqlite3 represents each row as a tuple. If a tuple does not suit your needs, you can use the sqlite3.Row class or a custom row_factory.

While row_factory exists as an attribute both on the Cursor and the Connection, it is recommended to set Connection.row_factory, so all cursors created from the connection will use the same row factory.

Row provides indexed and case-insensitive named access to columns, with minimal memory overhead and performance impact over a tuple. To use Row as a row factory, assign it to the row_factory attribute:

>>> con = sqlite3.connect(":memory:")
>>> con.row_factory = sqlite3.Row

Queries now return Row objects:

>>> res = con.execute("SELECT 'Earth' AS name, 6378 AS radius")
>>> row = res.fetchone()
>>> row.keys()
['name', 'radius']
>>> row[0]         # Access by index.
'Earth'
>>> row["name"]    # Access by name.
'Earth'
>>> row["RADIUS"]  # Column names are case-insensitive.
6378
>>> con.close()

You can create a custom row_factory that returns each row as a dict, with column names mapped to values:

def dict_factory(cursor, row):
    fields = [column[0] for column in cursor.description]
    return {key: value for key, value in zip(fields, row)}

Using it, queries now return a dict instead of a tuple:

>>> con = sqlite3.connect(":memory:")
>>> con.row_factory = dict_factory
>>> for row in con.execute("SELECT 1 AS a, 2 AS b"):
...     print(row)
{'a': 1, 'b': 2}
>>> con.close()

The following row factory returns a named tuple:

from collections import namedtuple

def namedtuple_factory(cursor, row):
    fields = [column[0] for column in cursor.description]
    cls = namedtuple("Row", fields)
    return cls._make(row)

namedtuple_factory() can be used as follows:

>>> con = sqlite3.connect(":memory:")
>>> con.row_factory = namedtuple_factory
>>> cur = con.execute("SELECT 1 AS a, 2 AS b")
>>> row = cur.fetchone()
>>> row
Row(a=1, b=2)
>>> row[0]  # Indexed access.
1
>>> row.b   # Attribute access.
2
>>> con.close()

With some adjustments, the above recipe can be adapted to use a dataclass, or any other custom class, instead of a namedtuple.

How to handle non-UTF-8 text encodings¶

By default, sqlite3 uses str to adapt SQLite values with the TEXT data type. This works well for UTF-8 encoded text, but it might fail for other encodings and invalid UTF-8. You can use a custom text_factory to handle such cases.

Because of SQLite’s flexible typing, it is not uncommon to encounter table columns with the TEXT data type containing non-UTF-8 encodings, or even arbitrary data. To demonstrate, let’s assume we have a database with ISO-8859-2 (Latin-2) encoded text, for example a table of Czech-English dictionary entries. Assuming we now have a Connection instance con connected to this database, we can decode the Latin-2 encoded text using this text_factory:

con.text_factory = lambda data: str(data, encoding="latin2")

For invalid UTF-8 or arbitrary data in stored in TEXT table columns, you can use the following technique, borrowed from the Unicode HOWTO:

con.text_factory = lambda data: str(data, errors="surrogateescape")

Transaction control¶

sqlite3 offers multiple methods of controlling whether, when and how database transactions are opened and closed. Transaction control via the autocommit attribute is recommended, while Transaction control via the isolation_level attribute retains the pre-Python 3.12 behaviour.