GeezerVisonThe World Wide Web, restored to 800 pixels of glory. |
| Home|About|Gaming cabinet|Archives|How it works|Starter sites |
GeezerVison is showing en.wikipedia.org — Full width at half maximum - Wikipedia  In a distribution, full width at half maximum (FWHM) is the difference between the two values of the independent variable at which the dependent variable is equal to half of its maximum value. In other words, it is the width of a spectrum curve measured between those points on the y-axis which are half the maximum amplitude. Half width at half maximum (HWHM) is half of the FWHM if the function is symmetric. The term full duration at half maximum (FDHM) is preferred when the independent variable is time. FWHM is applied to such phenomena as the duration of pulse waveforms (where it is typically called "pulse width at 50%", or PW50 [1][2]) and the spectral width of sources used for optical communications and the resolution of spectrometers. The convention of "width" meaning "half maximum" is also widely used in signal processing to define bandwidth as "width of frequency range where less than half the signal's power is attenuated", i.e., the power is at least half the maximum. In signal processing terms, this is at most 3 dB of attenuation, called half-power point or, more specifically, half-power bandwidth. When half-power point is applied to antenna beam width, it is called half-power beam width. The term half bandwidth is sometimes used to characterize spectroradiometers.[3][4][5] Half bandwidth has the meaning of HWHM; it should not be conflated with the half-width of a band, which is synonymous with FWHM.[6] Specific distributionsNormal distributionSee also: Gaussian beam § Beam waist
If the considered function is the density of a normal distribution of the form where σ is the standard deviation and x0 is the expected value, then the relationship between FWHM and the standard deviation is[7] The FWHM does not depend on the expected value x0; it is invariant under translations. The area within this FWHM is approximately 76% of the total area under the function. Gamma distributionThe density of a gamma distribution is given by with shape parameter and scale parameter θ. For , the FWHM is given by where denotes the th branch of the Lambert W function.[8] When , the gamma distribution reduces to an exponential distribution, whose FWHM is When , the gamma distribution is monotonically decreasing and therefore has no finite mode or well-defined full width at half maximum.
Other distributionsIn spectroscopy half the width at half maximum (here γ), HWHM, is in common use. For example, a Lorentzian/Cauchy distribution of height 1/πγ can be defined by Another important distribution function, related to solitons in optics, is the hyperbolic secant: Any translating element was omitted, since it does not affect the FWHM. For this impulse we have: where arcsch is the inverse hyperbolic secant. See alsoReferences
Sources
External links |
| You are visitor 01402503 — GeezerVison does not store the pages you look up. Best viewed with Netscape Navigator 4.7 or Internet Explorer 6 at 800×600. No cookies required. |
