GeezerVison

The Launch Director is the head of the launch team, and is responsible for making the final "go" or "no go" decision for launch after polling the relevant team members. There have been eight different Space Shuttle launch directors between 1981 and 2011.^[6] Since 2016, Charlie Blackwell-Thompson has served as the launch director for SLS/Orion missions as part of the Artemis program.^[7][8]

The Flow Director is responsible for the preparation of the spacecraft for launch, and remains in the LCC in an advisory capacity.

The NASA Test Director is responsible for all pre-launch testing, whether involving the flight crew, the orbiter, the external tank/solid rocket booster, or ground support equipment. The NTD is also responsible for the safety of all personnel on the pad after fuelling has occurred. Reports to the Launch Director.

The Orbiter Test Conductor is in charge of all pre-flight checkout and testing of the orbiter, and manages the engineers in the firing room who monitor the orbiter's systems. OTC is an employee of a contractor rather than of NASA.

The Payload Test Conductor is responsible for the pre-flight test and checkout of payloads carried by the orbiter and manages the engineering and test teams responsible for monitoring and controlling payload ground operations. PTC is a contractor member of the Space Shuttle Team.

The LPS Coordinator monitors and oversees the LPS System; specifically, the desired launch rate, Space Shuttle stacking (assembly), and all safety requirements. This is made possible by the Launch Processing System, or LPS — a highly automated, computer-controlled system that oversees the entire checkout and launch process.^[9]

The Superintendent of Range Operations ensures that all tracking and communications systems are ready to support the launch operation as well as ensuring that downrange airspace and splashdown areas remain clear for launch, and monitors weather near the launch site.

The Ground Launch Sequencer Engineer is responsible for monitoring the operation of the automated Ground Launch Sequencer system, which controls the countdown from T−9 minutes until launch. After this point through to T−31 seconds, they are in charge of implementing a manual hold if necessary. After T−31 seconds only an automatic cutoff is available. The automatic cutoff recycles the countdown clock to T−20 minutes. Usually this will extend the launch time beyond the launch window causing a scrub and a 24-hour turnaround.

• Launch Control Center Archived 2016-10-18 at the Wayback Machine
• Launch Control Center Archived 2008-06-19 at the Wayback Machine Main page.
• Launch Team Archived 2015-06-19 at the Wayback Machine