GeezerVison

This article's lead section may be too short to adequately summarize the key points. Please consider expanding the lead to provide an accessible overview of all important aspects of the article. (December 2021) (Learn how and when to remove this message)

Load testing is the process of putting demand on a structure or system and measuring its response.

Many types of machinery, engines,^[1] structures,^[2] and motors^[3] are load tested. The load may be at a designated safe working load (SWL), full load, or at an aggravated level of load. The governing contract, technical specification or test method contains the details of conducting the test. The purpose of a mechanical load test is to verify that all the component parts of a structure including materials, base-fixings are fit for task and loading it is designed for.

Several types of load testing are employed

• Static testing is when a designated constant load is applied for a specified time.
• Dynamic testing is when a variable or moving load is applied.
• Cyclical testing consists of repeated loading and unloading for specified cycles, durations and conditions.

The Supply of Machinery (Safety) Regulation 1992 UK state that load testing is undertaken before the equipment is put into service for the first time. Performance testing applies a safe working load (SWL), or other specified load, for a designated time in a governing test method, specification, or contract. Under the Lifting Operations and Lifting Equipment Regulations 1998 UK load testing after the initial test is required if a major component is replaced, if the item is moved from one location to another or as dictated by the competent person.

• Internet Application Management
• Soak testing
• Stress testing
• Structural testing
• System testing
• Web testing
• Web server benchmarking

• Modeling the Real World for Load Testing Web Sites by Steven Splaine
• What is Load Testing? by Tom Huston
• 4 Types of Load Testing and when each should be used by David Buch
• Performance, Load, Stress or Endurance Test? Which do you want? by Chris Jones