GeezerVisonThe World Wide Web, restored to 800 pixels of glory. | ||||||||||||||||
| Home|About|Gaming cabinet|Archives|How it works|Starter sites | ||||||||||||||||
GeezerVison is showing frameos.net — Seeed XIAO ePaper Display Board EE04 | FrameOS Devices Seeed XIAO ePaper Display Board EE04Seeed Studio XIAO ePaper Display Board EE04 - a XIAO ESP32-S3 Plus driver board for 24-pin and 50-pin e-paper panels, running FrameOS on-device. Official Seeed Studio store Official store page for this device. Manufacturer docs & datasheets
Part of the FrameOS device database. Spotted an error, or tested this panel? Edit this page on GitHub - it's a markdown file. The XIAO ePaper Display Board EE04 is Seeed's do-it-yourself e-paper board: a XIAO ESP32-S3 Plus (8 MB of PSRAM) on a carrier with a 24-pin and a 50-pin panel connector (a jumper picks which one is live), three user keys, a reset button and a battery connector with a charger. Bring your own panel - anything from a 1.54" black/white tag to the 7.5" tri-color and, on the 50-pin connector, the 7.3" Spectra 6. It has a hardware preset of its own, and FrameOS runs the full on-device renderer on it. Setup
Buttons and batteryThe keys are KEY1 (GPIO 2), KEY2 (GPIO 3) and KEY3 (GPIO 5), and they arrive in scenes as button events. The battery is read through a 2:1 divider on GPIO 1, switched on by GPIO 6. The board can't tell the firmware when USB is plugged in, so the preset leaves deep sleep off. Turn it on under Power if the frame lives on its battery. Pin map
Status🟡 Should work, not yet confirmed on real hardware. The pins are from Seeed's schematic. Tell us on GitHub or Discord if you try it. | ||||||||||||||||
| You are visitor 01402605 — GeezerVison does not store the pages you look up. Best viewed with Netscape Navigator 4.7 or Internet Explorer 6 at 800×600. No cookies required. |