plotly.graph_objects.sankey.link package¶

class plotly.graph_objects.sankey.link.Colorscale(arg=None, cmax=None, cmin=None, colorscale=None, label=None, name=None, templateitemname=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property cmax¶

Sets the upper bound of the color domain.

The ‘cmax’ property is a number and may be specified as:

• An int or float

Returns

Return type

int|float

property cmin¶

Sets the lower bound of the color domain.

The ‘cmin’ property is a number and may be specified as:

• An int or float

Returns

Return type

int|float

property colorscale¶

Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsla, hwb, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, [[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]. To control the bounds of the colorscale in color space, use cmin and cmax. Alternatively, colorscale may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric, Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis, YlGnBu,YlOrRd.

The ‘colorscale’ property is a colorscale and may be specified as:

• A list of colors that will be spaced evenly to create the colorscale. Many predefined colorscale lists are included in the sequential, diverging, and cyclical modules in the plotly.colors package.

• A list of 2-element lists where the first element is the normalized color level value (starting at 0 and ending at 1), and the second item is a valid color string. (e.g. [[0, ‘green’], [0.5, ‘red’], [1.0, ‘rgb(0, 0, 255)’]])

• One of the following named colorscales:

  [‘aggrnyl’, ‘agsunset’, ‘algae’, ‘amp’, ‘armyrose’, ‘balance’,

  ‘blackbody’, ‘bluered’, ‘blues’, ‘blugrn’, ‘bluyl’, ‘brbg’, ‘brwnyl’, ‘bugn’, ‘bupu’, ‘burg’, ‘burgyl’, ‘cividis’, ‘curl’, ‘darkmint’, ‘deep’, ‘delta’, ‘dense’, ‘earth’, ‘edge’, ‘electric’, ‘emrld’, ‘fall’, ‘geyser’, ‘gnbu’, ‘gray’, ‘greens’, ‘greys’, ‘haline’, ‘hot’, ‘hsv’, ‘ice’, ‘icefire’, ‘inferno’, ‘jet’, ‘magenta’, ‘magma’, ‘matter’, ‘mint’, ‘mrybm’, ‘mygbm’, ‘oranges’, ‘orrd’, ‘oryel’, ‘oxy’, ‘peach’, ‘phase’, ‘picnic’, ‘pinkyl’, ‘piyg’, ‘plasma’, ‘plotly3’, ‘portland’, ‘prgn’, ‘pubu’, ‘pubugn’, ‘puor’, ‘purd’, ‘purp’, ‘purples’, ‘purpor’, ‘rainbow’, ‘rdbu’, ‘rdgy’, ‘rdpu’, ‘rdylbu’, ‘rdylgn’, ‘redor’, ‘reds’, ‘solar’, ‘spectral’, ‘speed’, ‘sunset’, ‘sunsetdark’, ‘teal’, ‘tealgrn’, ‘tealrose’, ‘tempo’, ‘temps’, ‘thermal’, ‘tropic’, ‘turbid’, ‘turbo’, ‘twilight’, ‘viridis’, ‘ylgn’, ‘ylgnbu’, ‘ylorbr’, ‘ylorrd’].

  Appending ‘_r’ to a named colorscale reverses it.

Returns

Return type

str

property label¶

The label of the links to color based on their concentration within a flow.

The ‘label’ property is a string and must be specified as:

• A string

• A number that will be converted to a string

Returns

Return type

str

property name¶

When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with templateitemname matching this name alongside your modifications (including visible: false or enabled: false to hide it). Has no effect outside of a template.

The ‘name’ property is a string and must be specified as:

• A string

• A number that will be converted to a string

Returns

Return type

str

property templateitemname¶

Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with templateitemname matching its name, alongside your modifications (including visible: false or enabled: false to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it with visible: true.

The ‘templateitemname’ property is a string and must be specified as:

• A string

• A number that will be converted to a string

Returns

Return type

str

class plotly.graph_objects.sankey.link.Hoverlabel(arg=None, align=None, bgcolor=None, bordercolor=None, font=None, namelength=None, showarrow=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property align¶

Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

The ‘align’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [‘left’, ‘right’, ‘auto’]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

property bgcolor¶

Sets the background color of the hover labels for this trace

The ‘bgcolor’ property is a color and may be specified as a string in the following formats:

• hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

• hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

• rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

• rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

• hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

• hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

• hwb (e.g. ‘hwb(0 0% 100%)’)

• lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

• color (e.g. ‘color(display-p3 1 0 0)’)

• named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

• Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

• A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property bordercolor¶

Sets the border color of the hover labels for this trace.

The ‘bordercolor’ property is a color and may be specified as a string in the following formats:

• hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

• hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

• rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

• rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

• hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

• hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

• hwb (e.g. ‘hwb(0 0% 100%)’)

• lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

• color (e.g. ‘color(display-p3 1 0 0)’)

• named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

• Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

• A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property font¶

Sets the font used in hover labels.

The ‘font’ property is an instance of Font that may be specified as:

• An instance of plotly.graph_objects.sankey.link.hoverlabel.Font

• A dict of string/value properties that will be passed to the Font constructor

Returns

Return type

plotly.graph_objects.sankey.link.hoverlabel.Font

property namelength¶

Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to namelength - 3 characters and add an ellipsis.

The ‘namelength’ property is an integer and may be specified as:

• An int (or float that will be cast to an int) in the interval [-1, 9223372036854775807]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|numpy.ndarray

property showarrow¶

Sets whether or not to show the hover label arrow/triangle pointing to the data point.

The ‘showarrow’ property is a boolean and must be specified as:

• A boolean value: True or False

Returns

Return type

bool

class plotly.graph_objects.sankey.link.Line(arg=None, color=None, width=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property color¶

Sets the color of the line around each link.

The ‘color’ property is a color and may be specified as a string in the following formats:

• hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

• hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

• rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

• rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

• hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

• hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

• hwb (e.g. ‘hwb(0 0% 100%)’)

• lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

• color (e.g. ‘color(display-p3 1 0 0)’)

• named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

• Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

• A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property width¶

Sets the width (in px) of the line around each link.

The ‘width’ property is a number and may be specified as:

• An int or float in the interval [0, inf]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|float|numpy.ndarray