• Date: 2021-05-20
• Author: Nikita Popov [email protected], Joe Watkins [email protected]
• Status: Implemented
• Target Version: PHP 8.1
• Implementation: https://github.com/php/php-src/pull/7019

This RFC proposes the introduction of a first-class callable syntax, which supersedes existing encodings using strings and arrays. The advantage is that the new syntax is accessible to static analysis, and respects the scope at the point where the callable is created.

$fn = Closure::fromCallable('strlen');
$fn = strlen(...);
 
$fn = Closure::fromCallable([$this, 'method']);
$fn = $this->method(...)
 
$fn = Closure::fromCallable([Foo::class, 'method']);
$fn = Foo::method(...);

In this example, each pair of expressions is equivalent. The strlen(...) syntax creates a Closure that refers to the strlen() function, and so on.

The ... can be seen akin to the argument unpacking syntax ...$args, with the actual arguments not yet filled in:

$fn = Foo::method(...);
// Think of it as:
$fn = fn(...$args) => Foo::method(...$args);

The syntax is forward-compatible with partial functions application.

The syntax CallableExpr(...) is used to create a Closure object that refers to CallableExpr with the same semantics as Closure::fromCallable().

CallableExpr can be any expression that can be directly called in the PHP grammar. The following provides a non-exhaustive list of possible syntaxes:

strlen(...);
$closure(...);
$invokableObject(...);
$obj->method(...);
$obj->$methodStr(...);
($obj->property)(...);
Foo::method(...);
$classStr::$methodStr(...);
self::{$complex . $expression}(...);
'strlen'(...);
[$obj, 'method'](...);
[Foo::class, 'method'](...);

And advantage of the first-class callable syntax is that it uses the scope at the point where the callable is acquired. Consider the following example:

class Test {
    public function getPrivateMethod() {
        return [$this, 'privateMethod']; // does not work
        return Closure::fromCallable([$this, 'privateMethod']); // works, but ugly
        return $this->privateMethod(...); // works
    }
 
    private function privateMethod() {
        echo __METHOD__, "\n";
    }
}
 
$test = new Test;
$privateMethod = $test->getPrivateMethod();
$privateMethod();

If a classical array callable like [$this, 'privateMethod'] is used, then visibility will be checked at the point where the call is performed. If the new $this->privateMethod(...) syntax is used, then the visibility is checked at the point where the callable is created. Closure::fromCallable() already allows you to use those semantics now, with more syntactical boilerplate.

The new Foo() syntax is not considered a call, and as such also not supported by the new Foo(...) syntax. It should be noted that there is also no way to express object creation with traditional callable syntax, and it is thus also not supported by Closure::fromCallable().

The general expectation is that new Foo(...) would be creating a new instance of Foo on each call, rather than creating a single instance of Foo and then repeatedly calling the constructor. To support this, it would effectively be necessary to generate a trampoline function of the form

fn(...$args) => new Foo(...$args)

and acquire a callable to that trampoline instead. While certainly possible, this takes a step backwards from the straightforward semantics of the foo(...) syntax for ordinary calls.

The first-class callable syntax cannot be combined with the nullsafe operator. Both of the following result in a compile-time error:

$obj?->method(...);
$obj?->prop->method(...);

The $obj?->method(...) syntax has two potential interpretations:

$fn = $obj?->method(...);
// could be
$fn = $obj !== null ? $obj->method(...) : null;
// or
$fn = fn(...$args) => $obj?->method(...$args);

If this syntax were supported, it would likely follow the first interpretation, as the second interpretation does not correspond to a proper callable. However, this behavior is not particularly useful (as the return type is ?Closure) and likely surprising.

The first-class callable syntax interacts with declare(strict_types) the same way as Closure::fromCallable(): The strict_types mode at the point where the callable is acquired does not matter. Only the strict_types mode at the time the call is made is considered.

This RFC can be seen as an alternative to the partial functions application (PFA) RFC. I believe that PFA use-cases can be divided into roughly three categories:

The first is the use of PFA to acquire a callable, without partially applying any arguments. I believe that the vast majority of PFA uses would be for this purposes. This RFC proposes to provide special support for this use-case only.

The second is use in conjunction with the Pipe Operator (V2) proposal. Taking an example from the RFC:

$result = $var
 |> step_one(?)
 |> step_two(?, 'config')
 |> $obj->stepThree('param', ?);

However, PFA is only required for this particular form of the pipe operator. The Pipe Operator (V1) proposal instead used a syntax that is specific to the pipe operator:

$result = $var
 |> step_one($$)
 |> step_two($$, 'config')
 |> $obj->stepThree('param', $$);

If this definition of the pipe operator is adopted, then PFA is no longer needed for use with the pipe operator. Both approaches to the pipe operator have their advantages. The $$ based variant allows using more than plain function calls in each pipeline step (e.g. you could have $$->getName() as a step, something not possible with PFA), and is also trivially free. A PFA-based optimization would entail significant overhead relative to simple function calls, unless special optimization for the pipe operator usage is introduced (which may not be possible, depending on precise semantics).

Finally, while these two are the primary use-cases of PFA, there will also be the occasional usage in other contexts. For example:

$array = array_filter($array, str_contains(?, 'foo'));

Under this proposal, no dedicated syntax would be available for this use-case, and one would have to use an arrow function:

$array = array_filter($array, fn($s) => str_contains($s, 'foo'));

I think that the existing syntax is already sufficiently concise that there is no strong need to introduce an even shorter one.

As such, I believe that adding a first-class callable syntax, and using the original approach to the pipe operator, would give us most of the benefit of PFA at a much lower complexity cost. The PFA proposal has gone through many iterations, because nailing down the precise semantics turned out to be surprisingly hard. The final proposal is simple on a conceptual level, but very involved when it comes to detailed behavior.

The proposed syntax is forward-compatible with the latest iteration of the PFA proposal. As such, it would be possible to expand it into a full PFA feature in the future.

The call-based syntax also has the advantage that it is unambiguous: It represents exactly the callable that would be invoked by a direct call of the same syntax. This cannot be said of some other syntax choices that have been discussed in the past, for example:

// Proposed syntax is unambiguous and follows existing semantics:
$this->foo(...);   // Refers to a method
($this->foo)(...); // Refers to a callable stored in a property
 
// What does this mean?
$this->foo::function;

This can be resolved by limiting the ::function syntax to referencing proper symbols only, and not supporting its use to convert legacy callables to closures using $callable::function. Those would require an explicit Closure::fromCallable($callable) call.

A problem with the strlen::function syntax in particular is that it has a false analogy to Foo::class. The latter will just return a string, while the whole point of a first-class callable syntax is that it returns a Closure object, not a simple string or array.

Here are some commonly suggested syntax choices for first-class callables that are definitely not possible due to ambiguities:

// Using "&" sigil:
&foo->bar;
// Is ambiguous with by-reference assignment:
 
$x = &$foo->bar;
// is currently interpreted as
$x =& $foo->bar;
 
// Using no sigil:
strlen; // Is ambiguous with constant strlen
Foo::bar; // Is ambiguous with class constant Foo::bar
$foo->bar; // Is ambiguous with object property $foo->bar

Here are syntax choices that are (mostly) unambiguous if only usage with proper symbols is allowed:

// As mentioned above, people might expect this to return "strlen", not a Closure object:
strlen::function;
// Same as previous, and we'd rather avoid the legacy "callable" terminology.
strlen::callable;
 
// Unlike the "&" sigil, this is not ambiguous. It is also not particularly meaningful though.
*strlen;
// This also applies to various other sigils that are not yet used in unary position, but are equally meaningless:
^strlen;

I am generally open to using a different syntax, as I don't think forward-compatibility with a potential PFA feature is critical, but none of the choices are particularly great.

None.

Voting started on 2021-07-02 and closes on 2021-07-16.

Introduce first-class callable syntax as proposed?
Real name	Yes	No
alcaeus
as
asgrim
bwoebi
cmb
colinodell
daverandom
derick
dharman
galvao
ilutov
imsop
irker
jhdxr
kalle
kguest
kk
klaussilveira
kocsismate
lcobucci
levim
marandall
marcio
nicolasgrekas
nikic
ocramius
patrickallaert
petk
pollita
ralphschindler
ramsey
rasmus
reywob
santiagolizardo
sergey
sirsnyder
svpernova09
tandre
thekid
theodorejb
trowski
twosee
wyrihaximus
zimt
Final result:	44	0
This poll has been closed.