Field Summary

Constructor Summary

Method Summary

Field Details

• lock

  protected Object lock

  The object used to synchronize operations on this stream. For efficiency, a character-stream object may use an object other than itself to protect critical sections. A subclass should therefore use the object in this field rather than this or a synchronized method.

Constructor Details

• Reader

  protected Reader()

  Creates a new character-stream reader whose critical sections will synchronize on the reader itself.

• Reader

  protected Reader(Object lock)

  Creates a new character-stream reader whose critical sections will synchronize on the given object.

  Parameters:

  lock - The Object to synchronize on.

Method Details

• nullReader

  public static Reader nullReader()

  Returns a new Reader that reads no characters. The returned stream is initially open. The stream is closed by calling the close() method. Subsequent calls to close() have no effect.

  While the stream is open, the read(), read(char[]), read(char[], int, int), read(CharBuffer), ready(), skip(long), and transferTo() methods all behave as if end of stream has been reached. After the stream has been closed, these methods all throw IOException.

  The markSupported() method returns false. The mark() and reset() methods throw an IOException.

  The object used to synchronize operations on the returned Reader is not specified.

  Returns:

  a Reader which reads no characters

  Since:

  11

• of

  public static Reader of(CharSequence cs)

  Returns a Reader that reads characters from a CharSequence. The reader is initially open and reading starts at the first character in the sequence.

  The returned reader supports the mark() and reset() operations.

  The resulting reader is not safe for use by multiple concurrent threads. If the reader is to be used by more than one thread it should be controlled by appropriate synchronization.

  If the sequence changes while the reader is open, e.g. the length changes, the behavior is undefined.

  Parameters:

  cs - CharSequence providing the character stream.

  Returns:

  a Reader which reads characters from cs

  Throws:

  NullPointerException - if cs is null

  Since:

  24

• read

  public int read(CharBuffer target) throws IOException

  Attempts to read characters into the specified character buffer. The buffer is used as a repository of characters as-is: the only changes made are the results of a put operation. No flipping or rewinding of the buffer is performed. If the length of the specified character buffer is zero, then no characters will be read and zero will be returned.

  Specified by:

  read in interface Readable

  Parameters:

  target - the buffer to read characters into

  Returns:

  The number of characters added to the buffer, possibly zero, or -1 if this source of characters is at its end

  Throws:

  IOException - if an I/O error occurs

  NullPointerException - if target is null

  ReadOnlyBufferException - if target is a read only buffer, even if its length is zero

  Since:

  1.5

• read

  public int read() throws IOException

  Reads a single character. This method will block until a character is available, an I/O error occurs, or the end of the stream is reached.

  Subclasses that intend to support efficient single-character input should override this method.

  Returns:

  The character read, as an integer in the range 0 to 65535 (0x00-0xffff), or -1 if the end of the stream has been reached

  Throws:

  IOException - If an I/O error occurs

• read

  public int read(char[] cbuf) throws IOException

  Reads characters into an array. This method will block until some input is available, an I/O error occurs, or the end of the stream is reached.

  If the length of cbuf is zero, then no characters are read and 0 is returned; otherwise, there is an attempt to read at least one character. If no character is available because the stream is at its end, the value -1 is returned; otherwise, at least one character is read and stored into cbuf.

  Parameters:

  cbuf - Destination buffer

  Returns:

  The number of characters read, or -1 if the end of the stream has been reached

  Throws:

  IOException - If an I/O error occurs

• read

  public abstract int read(char[] cbuf, int off, int len) throws IOException

  Reads characters into a portion of an array. This method will block until some input is available, an I/O error occurs, or the end of the stream is reached.

  If len is zero, then no characters are read and 0 is returned; otherwise, there is an attempt to read at least one character. If no character is available because the stream is at its end, the value -1 is returned; otherwise, at least one character is read and stored into cbuf.

  Parameters:

  cbuf - Destination buffer

  off - Offset at which to start storing characters

  len - Maximum number of characters to read

  Returns:

  The number of characters read, or -1 if the end of the stream has been reached

  Throws:

  IndexOutOfBoundsException - If off is negative, or len is negative, or len is greater than cbuf.length - off

  IOException - If an I/O error occurs

• readAllLines

  public List<String> readAllLines() throws IOException

  Reads all remaining characters as lines of text. This method blocks until all remaining characters have been read and end of stream is detected, or an exception is thrown. This method does not close the reader.

  When this reader reaches the end of the stream, further invocations of this method will return an empty list.

  A line is either a sequence of zero or more characters followed by a line terminator, or it is a sequence of one or more characters followed by the end of the stream. A line does not include the line terminator.

  A line terminator is one of the following: a line feed character "\n" (U+000A), a carriage return character "\r" (U+000D), or a carriage return followed immediately by a line feed "\r\n" (U+000D U+000A).

  The behavior for the case where the reader is asynchronously closed, or the thread interrupted during the read, is highly reader specific, and therefore not specified.

  If an I/O error occurs reading from the stream then it may do so after some, but not all, characters have been read. Consequently the stream may not be at end of stream and may be in an inconsistent state. It is strongly recommended that the reader be promptly closed if an I/O error occurs.

  API Note:

  This method is intended for simple cases where it is appropriate and convenient to read the entire input into a list of lines. It is not suitable for reading input from an unknown origin, as this may result in the allocation of an arbitrary amount of memory.

  Returns:

  the remaining characters as lines of text stored in an unmodifiable List of Strings in the order they are read

  Throws:

  IOException - If an I/O error occurs

  OutOfMemoryError - If the number of remaining characters exceeds the implementation limit for String.

  Since:

  25

  See Also:

  • String.lines()
  • readAllAsString()
  • Files.readAllLines(Path, Charset)

• readAllAsString

  public String readAllAsString() throws IOException

  Reads all remaining characters into a string. This method blocks until all remaining characters including all line separators have been read and end of stream is detected, or an exception is thrown. The resulting string will contain line separators as they appear in the stream. This method does not close the reader.

  When this reader reaches the end of the stream, further invocations of this method will return an empty string.

  The behavior for the case where the reader is asynchronously closed, or the thread interrupted during the read, is highly reader specific, and therefore not specified.

  If an I/O error occurs reading from the stream then it may do so after some, but not all, characters have been read. Consequently the stream may not be at end of stream and may be in an inconsistent state. It is strongly recommended that the reader be promptly closed if an I/O error occurs.

  API Note:

  This method is intended for simple cases where it is appropriate and convenient to read the entire input into a String. It is not suitable for reading input from an unknown origin, as this may result in the allocation of an arbitrary amount of memory.

  Returns:

  a String containing all remaining characters

  Throws:

  IOException - If an I/O error occurs

  OutOfMemoryError - If the number of remaining characters exceeds the implementation limit for String.

  Since:

  25

  See Also:

  • readAllLines()
  • Files.readString(Path)

• skip

  public long skip(long n) throws IOException

  Skips characters. This method will block until some characters are available, an I/O error occurs, or the end of the stream is reached. If the stream is already at its end before this method is invoked, then no characters are skipped and zero is returned.

  Parameters:

  n - The number of characters to skip

  Returns:

  The number of characters actually skipped

  Throws:

  IllegalArgumentException - If n is negative.

  IOException - If an I/O error occurs

• ready

  public boolean ready() throws IOException

  Tells whether this stream is ready to be read.

  Returns:

  True if the next read() is guaranteed not to block for input, false otherwise. Note that returning false does not guarantee that the next read will block.

  Throws:

  IOException - If an I/O error occurs

• markSupported

  public boolean markSupported()

  Tells whether this stream supports the mark() operation. The default implementation always returns false. Subclasses should override this method.

  Returns:

  true if and only if this stream supports the mark operation.

• mark

  public void mark(int readAheadLimit) throws IOException

  Marks the present position in the stream. Subsequent calls to reset() will attempt to reposition the stream to this point. Not all character-input streams support the mark() operation.

  Parameters:

  readAheadLimit - Limit on the number of characters that may be read while still preserving the mark. After reading this many characters, attempting to reset the stream may fail.

  Throws:

  IOException - If the stream does not support mark(), or if some other I/O error occurs

• reset

  public void reset() throws IOException

  Resets the stream. If the stream has been marked, then attempt to reposition it at the mark. If the stream has not been marked, then attempt to reset it in some way appropriate to the particular stream, for example by repositioning it to its starting point. Not all character-input streams support the reset() operation, and some support reset() without supporting mark().

  Throws:

  IOException - If the stream has not been marked, or if the mark has been invalidated, or if the stream does not support reset(), or if some other I/O error occurs

• close

  public abstract void close() throws IOException

  Closes the stream and releases any system resources associated with it. Once the stream has been closed, further read(), ready(), mark(), reset(), or skip() invocations will throw an IOException. Closing a previously closed stream has no effect.

  Specified by:

  close in interface AutoCloseable

  Specified by:

  close in interface Closeable

  Throws:

  IOException - If an I/O error occurs

• transferTo

  public long transferTo(Writer out) throws IOException

  Reads all characters from this reader and writes the characters to the given writer in the order that they are read. On return, this reader will be at end of the stream. This method does not close either reader or writer.

  This method may block indefinitely reading from the reader, or writing to the writer. The behavior for the case where the reader and/or writer is asynchronously closed, or the thread interrupted during the transfer, is highly reader and writer specific, and therefore not specified.

  If the total number of characters transferred is greater than Long.MAX_VALUE, then Long.MAX_VALUE will be returned.

  If an I/O error occurs reading from the reader or writing to the writer, then it may do so after some characters have been read or written. Consequently the reader may not be at end of the stream and one, or both, streams may be in an inconsistent state. It is strongly recommended that both streams be promptly closed if an I/O error occurs.

  Parameters:

  out - the writer, non-null

  Returns:

  the number of characters transferred

  Throws:

  IOException - if an I/O error occurs when reading or writing

  NullPointerException - if out is null

  Since:

  10