Cache Configuration of wasmtime

The configuration file uses the toml format. You can create a configuration file at the default location with:

wasmtime config new

It will print the location regardless of the success. Please refer to the --help message for using a custom location.

All settings are optional. If the setting is not specified, the default value is used. Thus, if you don't know what values to use, don't specify them. The default values might be tuned in the future.

Wasmtime assumes all the options are in the cache section.

Example config:

[cache]
directory = "/nfs-share/wasmtime-cache/"
cleanup-interval = "30m"
files-total-size-soft-limit = "1Gi"

Please refer to the cache system section to learn how it works.

If you think some default value should be tuned, some new settings should be introduced or some behavior should be changed, you are welcome to discuss it and contribute to the Wasmtime repository.

Setting directory

• type: string (path)
• default: look up cache_dir in directories crate

Specifies where the cache directory is. Must be an absolute path.

Setting worker-event-queue-size

• type: string (SI prefix)
• format: "{integer}(K | M | G | T | P)?"
• default: "16"

Size of cache worker event queue. If the queue is full, incoming cache usage events will be dropped.

Setting baseline-compression-level

• type: integer
• default: 3, the default zstd compression level

Compression level used when a new cache file is being written by the cache system. Wasmtime uses zstd compression.

Setting optimized-compression-level

• type: integer
• default: 20

Compression level used when the cache worker decides to recompress a cache file. Wasmtime uses zstd compression.

Setting optimized-compression-usage-counter-threshold

• type: string (SI prefix)
• format: "{integer}(K | M | G | T | P)?"
• default: "256"

One of the conditions for the cache worker to recompress a cache file is to have usage count of the file exceeding this threshold.

Setting cleanup-interval

• type: string (duration)
• format: "{integer}(s | m | h | d)"
• default: "1h"

When the cache worker is notified about a cache file being updated by the cache system and this interval has already passed since last cleaning up, the worker will attempt a new cleanup.

Please also refer to allowed-clock-drift-for-files-from-future.

Setting optimizing-compression-task-timeout

• type: string (duration)
• format: "{integer}(s | m | h | d)"
• default: "30m"

When the cache worker decides to recompress a cache file, it makes sure that no other worker has started the task for this file within the last optimizing-compression-task-timeout interval. If some worker has started working on it, other workers are skipping this task.

Please also refer to the allowed-clock-drift-for-files-from-future section.

Setting allowed-clock-drift-for-files-from-future

• type: string (duration)
• format: "{integer}(s | m | h | d)"
• default: "1d"

Locks

When the cache worker attempts acquiring a lock for some task, it checks if some other worker has already acquired such a lock. To be fault tolerant and eventually execute every task, the locks expire after some interval. However, because of clock drifts and different timezones, it would happen that some lock was created in the future. This setting defines a tolerance limit for these locks. If the time has been changed in the system (i.e. two years backwards), the cache system should still work properly. Thus, these locks will be treated as expired (assuming the tolerance is not too big).

Cache files

Similarly to the locks, the cache files or their metadata might have modification time in distant future. The cache system tries to keep these files as long as possible. If the limits are not reached, the cache files will not be deleted. Otherwise, they will be treated as the oldest files, so they might survive. If the user actually uses the cache file, the modification time will be updated.

Setting file-count-soft-limit

• type: string (SI prefix)
• format: "{integer}(K | M | G | T | P)?"
• default: "65536"

Soft limit for the file count in the cache directory.

This doesn't include files with metadata. To learn more, please refer to the cache system section.

Setting files-total-size-soft-limit

• type: string (disk space)
• format: "{integer}(K | Ki | M | Mi | G | Gi | T | Ti | P | Pi)?"
• default: "512Mi"

Soft limit for the total size* of files in the cache directory.

This doesn't include files with metadata. To learn more, please refer to the cache system section.

*this is the file size, not the space physically occupied on the disk.

Setting file-count-limit-percent-if-deleting

• type: string (percent)
• format: "{integer}%"
• default: "70%"

If file-count-soft-limit is exceeded and the cache worker performs the cleanup task, then the worker will delete some cache files, so after the task, the file count should not exceed file-count-soft-limit * file-count-limit-percent-if-deleting.

This doesn't include files with metadata. To learn more, please refer to the cache system section.

Setting files-total-size-limit-percent-if-deleting

• type: string (percent)
• format: "{integer}%"
• default: "70%"

If files-total-size-soft-limit is exceeded and cache worker performs the cleanup task, then the worker will delete some cache files, so after the task, the files total size should not exceed files-total-size-soft-limit * files-total-size-limit-percent-if-deleting.

This doesn't include files with metadata. To learn more, please refer to the cache system section.

How does the cache work?

This is an implementation detail and might change in the future. Information provided here is meant to help understanding the big picture and configuring the cache.

There are two main components - the cache system and the cache worker.

Cache system

Handles GET and UPDATE cache requests.

• GET request - simply loads the cache from disk if it is there.
• UPDATE request - compresses received data with zstd and baseline-compression-level, then writes the data to the disk.

In case of successful handling of a request, it notifies the cache worker about this event using the queue. The queue has a limited size of worker-event-queue-size. If it is full, it will drop new events until the cache worker pops some event from the queue.

Cache worker

The cache worker runs in a single thread with lower priority and pops events from the queue in a loop handling them one by one.

On GET request

1. Read the statistics file for the cache file, increase the usage counter and write it back to the disk.

2. Attempt recompressing the cache file if all of the following conditions are met:

   • usage counter exceeds optimized-compression-usage-counter-threshold,
   • the file is compressed with compression level lower than optimized-compression-level,
   • no other worker has started working on this particular task within the last optimizing-compression-task-timeout interval.

   When recompressing, optimized-compression-level is used as a compression level.

On UPDATE request

1. Write a fresh statistics file for the cache file.
2. Clean up the cache if no worker has attempted to do this within the last cleanup-interval. During this task:
   • all unrecognized files and expired task locks in cache directory will be deleted
   • if file-count-soft-limit or files-total-size-soft-limit is exceeded, then recognized files will be deleted according to file-count-limit-percent-if-deleting and files-total-size-limit-percent-if-deleting. Wasmtime uses Least Recently Used (LRU) cache replacement policy and requires that the filesystem maintains proper mtime (modification time) of the files. Files with future mtimes are treated specially - more details in allowed-clock-drift-for-files-from-future.

Metadata files

• every cached WebAssembly module has its own statistics file
• every lock is a file