GeezerVison

Manycore processors are special kinds of multi-core processors designed for a high degree of parallel processing, containing numerous simpler, independent processor cores (from a few tens of cores to thousands or more). Manycore processors are used extensively in embedded computers and high-performance computing.

This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Manycore processor" – news · newspapers · books · scholar · JSTOR (December 2022) (Learn how and when to remove this message)

Manycore processors are distinct from multi-core processors in being optimized from the outset for a higher degree of explicit parallelism, and for higher throughput (or lower power consumption) at the expense of latency and lower single-thread performance.

The broader category of multi-core processors, by contrast, are usually designed to efficiently run both parallel and serial code, and therefore place more emphasis on high single-thread performance (e.g. devoting more silicon to out-of-order execution, deeper pipelines, more superscalar execution units, and larger, more general caches), and shared memory. These techniques devote runtime resources toward figuring out implicit parallelism in a single thread. They are used in systems where they have evolved continuously (with backward compatibility) from single core processors. They usually have a 'few' cores (e.g. 2, 4, 8) and may be complemented by a manycore accelerator (such as a GPU) in a heterogeneous system.

Cache coherency is an issue limiting the scaling of multicore processors. Manycore processors may bypass this with methods such as message passing,^[1] scratchpad memory, DMA,^[2] partitioned global address space,^[3] or read-only/non-coherent caches. A manycore processor using a network on a chip and local memories gives software the opportunity to explicitly optimise the spatial layout of tasks (e.g. as seen in tooling developed for TrueNorth).^[4]

Manycore processors may have more in common (conceptually) with technologies originating in high-performance computing such as clusters and vector processors.^[5]

GPUs may be considered a form of manycore processor having multiple shader processing units, and only being suitable for highly parallel code (high throughput, but extremely poor single thread performance).

• Message passing interface
• OpenCL^[6] or other APIs supporting compute kernels
• Partitioned global address space
• Actor model
• OpenMP^[7]
• Dataflow

• GPUs, which can be described as manycore vector processors
• Massively parallel processor array
• Asynchronous array of simple processors
• Spatial architecture

• ZettaScaler , Japanese PEZY Computing 2,048-core modules
• Xeon Phi coprocessor, which has MIC (Many Integrated Cores) architecture
• Tilera
• Adapteva Epiphany Architecture, a manycore chip using PGAS scratchpad memory
• Coherent Logix hx3100 Processor, a 100-core DSP/GPP processor based on HyperX Architecture
• Movidius Myriad 2, a manycore vision processing unit (VPU)
• Kalray, a manycore PCI-e accelerator for data-intensive tasks
• Teraflops Research Chip, a manycore processor using message passing
• TrueNorth, an AI accelerator with a manycore network on a chip architecture
• Green arrays, a manycore processor using message passing aimed at low power applications
• Sunway SW26010, a 260-core manycore processor used in the then top 1 supercomputer Sunway TaihuLight
  • SW52020, an improved 520-core^[8][9] variant of SW26010, with 512-bit SIMD (also adding support for half-precision), used in a prototype, meant for an exascale system (and in the future 10 exascale system), and according to datacenterdynamics China is rumored to already have two separate exascale systems secretly
• Eyeriss, a manycore processor designed for running convolutional neural nets for embedded vision applications^[10]
• Graphcore, a manycore AI accelerator

A number of computers built from multicore processors have one million or more individual CPU cores. Examples include:

• Gyoukou (Japanese: 暁光 Hepburn: gyōkō, dawn light), a supercomputer developed by ExaScaler and PEZY Computing, with 20,480,000 processing elements total, in addition to 1,250 Intel Xeon D host processors.
• SpiNNaker, a massively parallel (1 million CPU cores) manycore processor (ARM-based) built as part of the Human Brain Project.

Quite a few supercomputers have over 5 million CPU cores. When there are also coprocessors, e.g. GPUs used with, then those cores are not listed in the core-count, then quite a few more computers would hit those targets.

• Frontier
• Fugaku, a Japanese supercomputer using Fujitsu A64FX ARM-based cores, 7,630,848 in total.
• Sunway TaihuLight, a Chinese supercomputer with 10,649,600 cores across 40,960 nodes. Each node contains an SW26010 processor with 256 computing cores and four management cores.^[11] As of June 2026, Sunway TaihuLight ranked 27th on the TOP500 list.^[12]

• Vector processor
• SIMD
• High-performance computing
• Computer cluster
• Multiprocessor system on a chip
• Vision processing unit
• Memory access pattern
• Cache coherency
• Embarrassingly parallel
• Massively parallel
• CUDA

• Architecting solutions for the Manycore future, published on Feb 19, 2010 (more than one dead link in the slide)
• Eyeriss architecture