The JavaScript while loop runs code as long as a condition stays true. You can use it to repeat tasks like counting numbers or checking user inputs.

Understand the while Loop in JavaScript

The while loop is a control flow tool that repeats code as long as a given condition is true.

The loop keeps running while the condition stays true. It terminates if the condition is evaluated as false, and the program continues with the next statement following the loop.

Here is the syntax:

while (condition) {
  // code block to be executed
}

The condition is evaluated before each iteration. If the condition is true, the code block executes; otherwise, the loop ends.

Here is a quick example:

A basic use of the while loop is to count numbers within a specified range. For instance, to print numbers from 1 to 5:

let i = 1;
while (i <= 5) {
  console.log(i);
  i++;
}

The output:

1
2
3
4
5

This loop initializes i to 1 and increments it until it exceeds 5. It prints each value of i within the process.

No-Body while Loop (Without Braces)

You can omit the braces {} for the loop body if you only have one statement to execute. This can make the code more concise but may reduce readability if overused.

while (condition)
  statement;

• The condition is the boolean expression that is checked before each iteration.
• The Statement is the code executed as long as the condition is true. You must use braces if there are multiple statements.

Here is an example:

let i = 90;
while (i <= 100)
  console.log(i++);

The output:

90
91
92
93
94
95
96
97
98
99
100

In this code:

• The loop runs as long as i is less than or equal to 5.
• The statement console.log(i++) is executed on each iteration.
• The lack of braces means that only the console.log(i++) statement is considered part of the loop body.

Use the break and continue in while Loop

You can use break and continue in while loops to control the flow. These help you stop a loop early or skip a step.

The break ends the loop right away. It does not check the condition again. Here is an example:

let count = 0;
while (count < 10) {
  if (count === 5) {
    break;
  }
  console.log(count);
  count++;
}

This prints:

0  
1  
2  
3  
4

The loop stops when count reaches 5.

Continue skips the rest of the current loop step. It goes back to the condition and checks if it should keep going.

Here is an example:

let count = 0;
while (count < 5) {
  count++;
  if (count === 3) {
    continue;
  }
  console.log(count);
}

This prints:

1  
2  
4  
5

The number 3 does not print because continue skips the console.log() for that step.

The while vs do…while Loop

The while loop and the do...while loop both repeat code while a condition is true. The key difference is when the condition runs.

While loop checks the condition before the first run. If the condition is false, the loop doesn’t run.

Here is an example:

let count = 0;
while (count > 0) {
  console.log(count);
  count--;
}

This runs zero times because count > 0 is false right away.

Do…while loop runs the code first, then checks the condition. It always runs at least once.

Example:

let count = 0;
do {
  console.log(count);
  count--;
} while (count > 0);

This prints 0 one time, even though the condition is false.

How to Avoid Infinite Loops in a while Loop

You need to set up a clear exit condition to avoid infinite loops in a while loop. The loop will run forever if the condition never becomes false.

Here are the steps you can follow:

Write a condition that can change based on something inside the loop. For example:

let count = 0;
while (count < 5) {
  console.log(count);
  count++;
}

Output:

0
1
2
3
4

The loop stops when count reaches 5. Without count++, the loop would run forever.

You need to change the variable that controls the loop. If that does not happen, the loop condition stays true. Like this:

let input = '';
while (input !== 'exit') {
  input = prompt('Type "exit" to stop');
}

The user controls the exit. The loop ends when they type the right word.

You can include a break inside the loop in case something goes wrong. For example:

let count = 0;
while (true) {
  if (count >= 10) break;
  console.log(count);
  count++;
}

The output:

0
1
2
3
4
5
6
7
8
9

This kind of loop can help when the end condition is complex but you still want control.

Example 1: Sum of User Input Values

You can use a while loop to add numbers entered by the user. The loop continues until the user types a negative number. Each valid number adds to the total.

Examples:

let sum = 0;
let num = 0;

while (num >= 0) {
  num = parseInt(prompt("Enter a number:"));
  if (num >= 0) {
    sum += num;
  }
}

console.log("The total sum is: " + sum);

This helps you collect and add numbers until the user chooses to stop.

Example 2: Nested While Loops

A nested while loop means you put one while loop inside another. The outer loop runs first. The inner loop runs completely for each turn of the outer loop.

Here is a simple example:

let i = 1;
while (i <= 3) {
  let j = 1;
  while (j <= 2) {
    console.log(`i = ${i}, j = ${j}`);
    j++;
  }
  i++;
}

This prints:

i = 1, j = 1  
i = 1, j = 2  
i = 2, j = 1  
i = 2, j = 2  
i = 3, j = 1  
i = 3, j = 2  

The outer loop controls i and the inner loop controls j. For each value of i, the j loop starts fresh and runs two times.

Example 3: Find All Prime Numbers in a Given Range

This example shows you how to use a while loop to find all prime numbers in a given range.

let num = 2;
let primes = [];
while (num <= 100) {
  let isPrime = true;
  let divisor = 2;
  while (divisor <= Math.sqrt(num)) {
    if (num % divisor === 0) {
      isPrime = false;
      break;
    }
    divisor++;
  }
  if (isPrime) {
    primes.push(num);
  }
  num++;
}
console.log(primes);

The output:

[
   2,  3,  5,  7, 11, 13, 17, 19,
  23, 29, 31, 37, 41, 43, 47, 53,
  59, 61, 67, 71, 73, 79, 83, 89,
  97
]

Here is how it works:

• We use two nested while loops. The outer loop checks numbers from 2 to 100.
• The inner loop checks if the current number is divisible by any number less than or equal to the square root of the current number.
• If no divisors are found, the number is added to the primes array.

Example 4: Simulates a Progress Bar

This example simulates a progress bar using a while loop to iterate through and display a simple percentage-based progress.

let progress = 0;
const target = 100;
while (progress < target) {
  progress += 10;
  console.clear();
  console.log(`Progress: [${'='.repeat(progress / 10)}${' '.repeat((target - progress) / 10)}] ${progress}%`);
  // Simulate time delay (e.g., loading or task)
  for (let i = 0; i < 1e6; i++) {}
}

Output:

Progress: [=         ] 10%
Progress: [==        ] 20%
Progress: [===       ] 30%
Progress: [====      ] 40%
Progress: [=====     ] 50%
Progress: [======    ] 60%
Progress: [=======   ] 70%
Progress: [========  ] 80%
Progress: [========= ] 90%
Progress: [==========] 100%

How it works:

• The loop continues until the progress reaches 100.
• Each iteration adds 10% to the progress and updates the progress bar output.
• The console.clear() is used to clear the screen and print the updated progress bar.
• The inner loop is used to simulate a delay for visualization (in real-world cases, this could be replaced with actual work being done).

Wrapping Up

You learned how the while loop in JavaScript allows code to repeat as long as a given condition is true.

Here is a quick recap:

• The while loop repeats code as long as the condition is true.
• You can sum values or count with the while loop.
• Nested while loops help in more complex scenarios.
• Using break and continue allows you to control loop flow.
• The do...while loop ensures at least one iteration.

Thank you for reading. Here are JavaScript tutorials if you need to read more.

FAQ’s

while (condition) {
  // code block to be executed
}

let count = 0;
while (count < 10) {
  if (count === 5) {
    break;
  }
  console.log(count);
  count++;
}

let count = 0;
while (count > 0) {
  console.log(count);
  count--;
}

let count = 0;
do {
  console.log(count);
  count--;
} while (count > 0);

let sum = 0;
let num = 0;

while (num >= 0) {
  num = parseInt(prompt("Enter a number:"));
  if (num >= 0) {
    sum += num;
  }
}

console.log("The total sum is: " + sum);

while (condition)
  statement;

Similar Reads

• JavaScript