This is a simple networking keyscript that can be used from crypttab(5) in order to boot headless encrypted servers by supplying key material over the network.

When run, it will bring eth0 up if it is not up already, and then wait for a IPv6 UDP packet containing the passphrase to be sent to the local link multicast address. Once it arrives, the keyscript prints the received passphrase to standard output and exits, allowing the system to decrypt the disk with the supplied passphrase and continue.

On the headless server, install netkeyscript into /usr/local/sbin/ and modify /etc/crypttab to add a keyscript option. It should end up looking something like this:

md1_crypt UUID=01234567-89ab-cdef-0123-456789abcdef none luks,keyscript=/usr/local/sbin/netkeyscript

On Debian and Ubuntu, you need to update the initramfs after changing crypttab:

sudo update-initramfs -u

Once set up, use netkeyscript-send.py on your client like this when the server is waiting for the passphrase:

echo -n 'passphrase'|sudo python netkeyscript-send.py --iface=eth0

In this example, eth0 is the interface on your client machine to use to send out the key.

• The key is sent to the machine unencrypted. Anyone on your LAN will be able to pick it up. You should decide whether this is safe in your situation. You could use a temporary crossover cable directly as an alternative.

• If Mallory pretends to be your server (for example: by physically replacing it, or by intercepting network communication), he can fool you into handing over your passphrase.

• Add network encryption for the passphrase itself based on a shared secret. This would protect against LAN-based snooping, but would still need to assume that the server has not been physically compromised, as the shared secret would need to be stored on the server unencrypted.