GeezerVison is showing github.com — cz check range sometimes failed in GitLab CI · Issue #593 · commitizen-tools/commitizen
cz check range sometimes failed in GitLab CI #593DescriptionDescription
Runcz check --range origin/master..HEAD to check commits in CI occasionally fails.
And it worked after I retried the job.But sometimes it didn't work after retrying multiple times.
I couldn't find out the reason ,
Steps to reproduce
lint:
retry: 1
script:
- cz version
- cz check --rev-range origin/master..HEAD
Current behavior
cz check --rev-range origin/master..HEAD failed. Outputs attached below:
fatal: ambiguous argument 'master..HEAD': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
Desired behavior
cz check --rev-range can run successfully in gitlab CI.
Screenshots
Environment
commitizen version: 2.34.0
python version: 3.7.5
operating system: Linux Reacted by Ross Patterson, Ackerman and gebbissimo ActivityLee-W commented on Sep 22, 2022 Is it possible that the git repo doesn't setup remote 🤔 SsuperL commented on Sep 23, 2022 I run command git remote -v in the CI , and it shows that the remote has been setup. SsuperL commented on Sep 23, 2022 Lee-W commented on Sep 23, 2022 Hmmm... As I'm not able to reproduce it, I don't have any clue on how we could fix it. But we can keep it open till you or someone encounter this issue again with more detail SsuperL commented on Sep 25, 2022 Actually,this issue has come up again. SsuperL commented on Sep 26, 2022 
And when I merged the branch into master,it said that there is no commit found range origin/master..HEAD.
Lee-W commented on Sep 26, 2022 Do you mean after merging back to the master branch? If that's the case, your HEAD will on on master so the result seem to be expected. SsuperL commented on Sep 27, 2022
Do you mean after merging back to the master branch? If that's the case, your HEAD will on on master so the result seem to be expected.
yes. Or can it skip check when there's no commit rather than make the job failed?
Lee-W commented on Oct 3, 2022 SsuperL commented on Oct 9, 2022
cz --no-raise 3 check --rev-range master..
I'll try it.Thank you! Lujeni commented on Oct 19, 2022 @SsuperL did you try to git fetch before your command ? its seems GitLab CI dont fetch every branch SsuperL commented on Oct 24, 2022
@SsuperL did you try to git fetch before your command ? its seems GitLab CI dont fetch every branch
No, but it only appeared on some machines. And the command git branch -r shows branch origin/master exists.
SsuperL commented on Nov 29, 2022 Lee-W commented on Nov 29, 2022 do you have remote origin and branch master? baggiponte commented on Mar 22, 2023 Hi, I am having the same issue outside of CI. When I git push with the pre-push pre-commit hook, I get the following:
fatal: ambiguous argument 'origin/HEAD..HEAD': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
Whereas if I skip the verification everything works fine.
Unfortunately the repo is private and I can't share the url, but the configs are:
default_install_hook_types:
- pre-commit
- pre-push
default_language_version:
python: python3.9
repos:
- repo: https://github.com/commitizen-tools/commitizen
rev: v2.42.1
hooks:
- id: commitizen-branch
stages: [ push ]And the hook (which should not matter) is:
#!/usr/bin/env bash
# File generated by pre-commit: https://pre-commit.com
# ID: 138fd403232d2ddd5efb44317e38bf03
# start templated
INSTALL_PYTHON=/Users/lucabaggi/.local/share/pipx/venvs/pre-commit/bin/python
ARGS=(hook-impl --config=.pre-commit-config.yaml --hook-type=pre-push)
# end templated
HERE="$(cd "$(dirname "$0")" && pwd)"
ARGS+=(--hook-dir "$HERE" -- "$@")
if [ -x "$INSTALL_PYTHON" ]; then
exec "$INSTALL_PYTHON" -mpre_commit "${ARGS[@]}"
elif command -v pre-commit > /dev/null; then
exec pre-commit "${ARGS[@]}"
else
echo '`pre-commit` not found. Did you forget to activate your virtualenv?' 1>&2
exit 1
fiSsuperL commented on Mar 23, 2023
Hi, I am having the same issue outside of CI. When I git push with the pre-push pre-commit hook, I get the following:
fatal: ambiguous argument 'origin/HEAD..HEAD': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
Whereas if I skip the verification everything works fine.
Unfortunately the repo is private and I can't share the url, but the configs are:
default_install_hook_types:
- pre-commit
- pre-push
default_language_version:
python: python3.9
repos:
- repo: https://github.com/commitizen-tools/commitizen
rev: v2.42.1
hooks:
- id: commitizen-branch
stages: [ push ]And the hook (which should not matter) is:
#!/usr/bin/env bash
# File generated by pre-commit: https://pre-commit.com
# ID: 138fd403232d2ddd5efb44317e38bf03
# start templated
INSTALL_PYTHON=/Users/lucabaggi/.local/share/pipx/venvs/pre-commit/bin/python
ARGS=(hook-impl --config=.pre-commit-config.yaml --hook-type=pre-push)
# end templated
HERE="$(cd "$(dirname "$0")" && pwd)"
ARGS+=(--hook-dir "$HERE" -- "$@")
if [ -x "$INSTALL_PYTHON" ]; then
exec "$INSTALL_PYTHON" -mpre_commit "${ARGS[@]}"
elif command -v pre-commit > /dev/null; then
exec pre-commit "${ARGS[@]}"
else
echo '`pre-commit` not found. Did you forget to activate your virtualenv?' 1>&2
exit 1
fi
Have you tried git fetch ? That works for me. baggiponte commented on Mar 23, 2023
Have you tried git fetch ? That works for me.
Does not for me... Perhaps it can mess up if I have git push --force previously? baggiponte commented on Mar 27, 2023 Hello, if I run cz check --rev-range origin/main..HEAD it works. I noticed that the pre-commit hook has --rev-range origin/HEAD..HEAD which is an invalid ref. Perhaps when the repo has multiple branches the reference becomes invalid? Will try to make a reprex soon. Reacted by Santiago Fraire Willemoes, Charles Aracil, golegario96 and Daniel Black johanmynhardt commented on Dec 21, 2023 The following fixed it for me:
git remote set-head origin -a Eventually found a semi-good explanation at: https://learnku.com/articles/71493
(My issue is actually when I'm trying to run git push with the pre-push hook enabled, which then gives a similar error on ambiguity.) Reacted by Elijas Dapšauskas, marlon, daymade, Damien Storm, Mike-F-G and andyinno AdrianDC commented on Aug 19, 2024 Checking older or related issues to access the tool's status.
-
Access master branch on GitLab CI : Only the current branch commits are accessible + shallow history, fetching is needed for any branch
- Settings / CI/CD / Git shallow clone:
The number of changes to fetch from GitLab when cloning a repository. Lower values can speed up pipeline execution. Set to 0 or blank to fetch all branches and tags for each job (default: 50)
- Comparing with another branch or even using the current branch or the merge request target branch needs fetching
- Variables : By default, the
*_SHA variables are the ones for detecting the commit's / pipeline's context
- Predefine variables: https://docs.gitlab.com/ee/ci/variables/predefined_variables.html)
-
The CI_COMMIT_BEFORE_SHA variable can be used to compare a CI with the previously pushed commit, but handlings are needed:
-
origin/HEAD..HEAD push issues : fix(pre-commit-hooks)!: allow empty ranges in 'commitizen-branch' #1209
dboeckenhoff commented on Jan 14, 2025 Having the same issue as new user in 2025; git fetch did not help Lee-W commented on Mar 30, 2025
Having the same issue as new user in 2025; git fetch did not help
Hey could you please provide an example so that we could try to reproduce and see what's happening? Thanks! bearomorphism commented on May 9, 2026 Triage from #1964: This is caused by GitLab CI's shallow clone — origin/master isn't present in the runner's local refs — not a commitizen bug. Workaround: set GIT_DEPTH: 0 in your .gitlab-ci.yml (or git fetch --unshallow / git fetch origin master:master before running cz check --rev-range). Suggesting we close this. bearomorphism commented on May 9, 2026 Verification update (re #1964)
Reproduced against current master (4.15.1):
git clone --depth=1 of the default branch — cz check --rev-range origin/master..HEAD works fine (origin/master is present).- A more accurate GitLab-runner simulation (shallow + single-branch fetch missing
master refs) reproduces the exact failure:
fatal: ambiguous argument 'origin/master..HEAD': unknown revision or path not in the working tree
(exit 23)
- Mitigations confirmed working:
git fetch --unshallow origin master:master — fixes master..HEADgit fetch origin master:refs/remotes/origin/master — fixes origin/master..HEAD without unshallowing
Verdict: NOT A BUG / CI ENVIRONMENT.
The failure is purely a GitLab-CI shallow-clone artifact: origin/master isn't a fetched ref in the runner's local repo. Commitizen passes the rev-range to git log, which errors as expected.
Workaround for the user's GitLab pipeline:
variables:
GIT_DEPTH: "0" # or sufficient depth to include the merge base
# or
script:
- git fetch origin master:refs/remotes/origin/master
- cz check --rev-range origin/master..HEAD Closing-eligible.
(One improvement we could make in commitizen itself: catch the git log error in cz check --rev-range and surface a clearer message like "Could not resolve rev-range '<range>': did you forget to fetch the base branch in CI?". Optional.) bearomorphism commented on May 9, 2026 Closing as not a bug: reproduced as a CI shallow-clone artifact. Workarounds (GIT_DEPTH: 0 or git fetch origin master:refs/remotes/origin/master) confirmed working. See verification comment above.
MetadataMetadataDevelopmentNo branches or pull requestsIssue actions
|
