GeezerVison is showing github.com โ kellertk - Overview
๐ญ
almost done thinking with xhigh effort
Tom Keller
kellertk
๐ญ
almost done thinking with xhigh effort
Software Development Manager at
@aws.
Repositories in the kellertk namespace are my own and aren't supported by my employer.
Pinned
Loading
-
Forked from simon-frankau/galette
A GAL assembler, largely galasm-compatible and written in Rust. (galette-tk version)
Rust
2
-
-
1
# Atmel ATDH1150USB as an OpenOCD JTAG adapter (Linux)
3
# This is Microchip's official USB JTAG adapter for their CPLD devices. On
4
# Windows you can use ATMISP. The robots would have you believe it's not
5
# supported on Linux, but I think that's because nobody has bothered to write an
-
1
The [PiSugar2](https://www.tindie.com/products/pisugar/pisugar2-battery-for-raspberry-pi-zero/) is a battery board for the Raspberry Pi Zero. It has an integrated [RTC chip](https://github.com/PiSugar/PiSugar/wiki/PiSugar2#hardware-specs) available over I2C, but there are no drivers included in the kernel with the latest release of the pwnagotchi (or Kali in general). It's a ZXW Shenzhen SD3078; there is surprisingly little information out there about this chip. I suspect it's newish.
3
The PiSugar folks expect you to install [Pisugar Power Manager](https://github.com/PiSugar/pisugar-power-manager-rs), which is a web service to get battery status and set the RTC. I prefer to use the standard `hwclock` utility, because I don't need the extra function in the web interface. There is driver support for this chip in [kernels 5.1 or newer](https://github.com/torvalds/linux/commit/1d67a232105b4dec2b10b2689f9cb89cc366d62f), so we can grab that and compile it as an out of tree module. You may be able to adapt these instructions for your use.
5
Normally to do this you'd download the kernel headers, compile and install and be happy. I wasn't able to get the kernel headers for the kernel shipped with pwnagotchi working for me, so instead I did this against the full kernel source tree.
-
a plugin for pwnagotchi that shows your GPS location from GPSD
Python
80
9
-
Control a fan for your Raspberry Pi with one of the BCM's hardware PWM timers
Python
4
1
Uh oh!
There was an error while loading. Please reload this page.