This repo is set up to use automated builds on docker hub.
For multi arch builds on Docker we use buildx. You have to create a builder before being able to build the containers.
docker buildx create --name container --driver=docker-container
The following functions are used to build and push images on x86 machines:
buildcontainer () { docker buildx build --load --platform linux/amd64,linux/arm64 "$@"; }
pushcontainer () { for var in "$@"; do docker push "$var"; done; }
On Apple Silicon Macs, you have to upload the images to a registry that supports multi-arch images in one step.
buildcontainer () { docker buildx build --no-cache --push --platform linux/amd64,linux/arm64 "$@"; }
With Lima
lima sudo systemctl start containerd
lima sudo nerdctl run --privileged --rm tonistiigi/binfmt:qemu-v9.2.2 --install all
buildcontainer () { lima nerdctl build --platform=amd64,arm64 "$@"; }
pushcontainer () { for var in "$@"; do nerdctl push --all-platforms "$var"; done; }
On Docker Hub: https://hub.docker.com/r/livingdocs/node
buildcontainer -t livingdocs/node:26.2 -t livingdocs/node:26 -f node-26.Dockerfile . buildcontainer -t livingdocs/node:26.2-pc -t livingdocs/node:26-pc -f node-26-pc.Dockerfile . buildcontainer -t livingdocs/node:24.5 -t livingdocs/node:24 -f node-24.Dockerfile . buildcontainer -t livingdocs/node:24.5-pc -t livingdocs/node:24-pc -f node-24-pc.Dockerfile . buildcontainer -t livingdocs/node:22.10 -t livingdocs/node:22 -f node-22.Dockerfile . pushcontainer livingdocs/node:26.2 livingdocs/node:26 # skip it when using docker pushcontainer livingdocs/node:26.2-pc livingdocs/node:26-pc # skip it when using docker pushcontainer livingdocs/node:24.5-pc livingdocs/node:24-pc # skip it when using docker pushcontainer livingdocs/node:24.5 livingdocs/node:24 # skip it when using docker pushcontainer livingdocs/node:22.10 livingdocs/node:22 # skip it when using docker
On Docker Hub: https://hub.docker.com/r/livingdocs/server-base
buildcontainer -t livingdocs/server-base:26.2 -t livingdocs/server-base:26 -f ./livingdocs-server-base/26.Dockerfile ./livingdocs-server-base buildcontainer -t livingdocs/server-base:26.2-pc -t livingdocs/server-base:26-pc --build-arg VERSION=26-pc -f ./livingdocs-server-base/26.Dockerfile ./livingdocs-server-base buildcontainer -t livingdocs/server-base:24.5-pc -t livingdocs/server-base:24-pc -f ./livingdocs-server-base/24.Dockerfile --build-arg VERSION=24-pc ./livingdocs-server-base buildcontainer -t livingdocs/server-base:24.5 -t livingdocs/server-base:24 -f ./livingdocs-server-base/24.Dockerfile ./livingdocs-server-base buildcontainer -t livingdocs/server-base:22.11 -t livingdocs/server-base:22 -f ./livingdocs-server-base/22.Dockerfile ./livingdocs-server-base pushcontainer livingdocs/server-base:26.2 livingdocs/server-base:26 # skip it when using docker pushcontainer livingdocs/server-base:26.2-pc livingdocs/server-base:26-pc # skip it when using docker pushcontainer livingdocs/server-base:24.5-pc livingdocs/server-base:24-pc # skip it when using docker pushcontainer livingdocs/server-base:24.5 livingdocs/server-base:24 # skip it when using docker pushcontainer livingdocs/server-base:22.11 livingdocs/server-base:22 # skip it when using docker
On Docker Hub: https://hub.docker.com/r/livingdocs/editor-base
buildcontainer -t livingdocs/editor-base:26.2 -t livingdocs/editor-base:26 -f ./livingdocs-editor-base/26.Dockerfile ./livingdocs-editor-base buildcontainer -t livingdocs/editor-base:26.2-pc -t livingdocs/editor-base:26-pc --build-arg VERSION=26-pc -f ./livingdocs-editor-base/26.Dockerfile ./livingdocs-editor-base buildcontainer -t livingdocs/editor-base:24.5 -t livingdocs/editor-base:24 -f ./livingdocs-editor-base/24.Dockerfile ./livingdocs-editor-base buildcontainer -t livingdocs/editor-base:22.11 -t livingdocs/editor-base:22 -f ./livingdocs-editor-base/22.Dockerfile ./livingdocs-editor-base pushcontainer livingdocs/editor-base:26.2 livingdocs/editor-base:26 # skip it when using docker pushcontainer livingdocs/editor-base:26.2-pc livingdocs/editor-base:26-pc # skip it when using docker pushcontainer livingdocs/editor-base:24.5 livingdocs/editor-base:24 # skip it when using docker pushcontainer livingdocs/editor-base:22.11 livingdocs/editor-base:22 # skip it when using docker
The official docker image with node, git and curl
On Docker Hub: https://hub.docker.com/r/livingdocs/docker-node
buildcontainer -t livingdocs/docker-node:28-22 -f ./docker-node/Dockerfile ./docker-node
pushcontainer livingdocs/docker-node:28-22 # skip it when using dockerbuildcontainer -t livingdocs/postgres-exporter -f ./postgres-exporter/Dockerfile ./postgres-exporter
pushcontainer livingdocs/postgres-exporter # skip it when using dockerOn Docker Hub: https://hub.docker.com/r/livingdocs/odyssey
Build:
buildcontainer -t livingdocs/odyssey:1.4 -f odyssey/Dockerfile ./odyssey
pushcontainer livingdocs/odyssey:1.4 # skip it when using dockerOn Docker Hub: https://hub.docker.com/r/livingdocs/pgbouncer
Build:
buildcontainer -t livingdocs/pgbouncer -f ./pgbouncer/Dockerfile ./pgbouncer
pushcontainer livingdocs/pgbouncer # skip it when using dockerOn Docker Hub: https://hub.docker.com/r/livingdocs/certbot-route53-postgres
Build:
buildcontainer -t livingdocs/certbot-route53-postgres -f certbot-route53-postgres.Dockerfile . pushcontainer livingdocs/certbot-route53-postgres # skip it when using docker
On Docker Hub: https://hub.docker.com/r/livingdocs/letsencrypt
A docker image that sets up a daily cronjob and tries to generate certificates if they need renewal. Certificates are pushed to an s3 bucket, so they can be fetched from other scripts.
Build:
buildcontainer -t livingdocs/letsencrypt:1.1 -f ./letsencrypt/Dockerfile ./letsencrypt
pushcontainer livingdocs/letsencrypt:1.1 # skip it when using dockerOn Docker Hub: https://hub.docker.com/r/livingdocs/envoy
The envoy docker image with curl, nano and jq, envsubst and oidc filter.
Build:
buildcontainer -t livingdocs/envoy:v1.31.0 -f ./envoy/Dockerfile ./envoy
pushcontainer livingdocs/envoy:v1.31.0 # skip it when using dockerOn Docker Hub: https://hub.docker.com/r/livingdocs/fetch-certificate
Works together with livingdocs/letsencrypt to download a certificate into a file. It's just doing an http request and writing two files. Basically a simple curl command could do the same thing, but I just wanted to test rust for something.
Use:
docker run -it --rm \ -e FETCH_CERTIFICATE_TOKEN="JWT.GF...SD.SJQ" \ -e FETCH_CERTIFICATE_URL='https://letsencrypt.livingdocs.io' \ -e FETCH_CERTIFICATE_FILE='/etc/certificates/postgres.livingdocs.io' \ livingdocs/fetch-certificate
Build:
regctl image cp docker.elastic.co/elasticsearch/elasticsearch:7.17.9 livingdocs/elasticsearch:7.17.9 regctl image cp docker.elastic.co/elasticsearch/elasticsearch:8.18.0 livingdocs/elasticsearch:8.18.0 regctl image cp docker.elastic.co/elasticsearch/elasticsearch:9.0.0 livingdocs/elasticsearch:9.0.0
Use:
docker run --name elasticsearch8 -p 9200:9200 -e 'discovery.type=single-node' livingdocs/elasticsearch:8.12.0Kubectl as drone plugin used to upgrade an image of a container in a deployment.
Build:
docker build -t livingdocs/kubectl:3 -f ./kubectl/Dockerfile ./kubectl
Use: .drone.yaml
steps: - name: kubernetes image: livingdocs/kubectl settings: namespace: blue-dev deployment: swisscom-tv-delivery image: "livingdocs/swisscom-tv-delivery:${DRONE_TAG}" container: delivery config: # The whole kubernetes config file content from_secret: kube_config
An alternative to https://github.com/weaveworks/watch
On Docker Hub: https://hub.docker.com/r/livingdocs/file-change-hook
A small service that can be deployed as sidecar that watches files and triggers a script when they change. This can be used for example to trigger a config reload in a service upon a ConfigMap change in kubernetes.
The image has some dependencies pre-installed: bash, curl, dig, jq
Build:
buildcontainer -t livingdocs/file-change-hook:1.0 -f ./file-change-hook/Dockerfile ./file-change-hook
pushcontainer livingdocs/file-change-hook:1.0 # skip it when using dockerUse:
Usage: file-change-hook <command> <file-or-directory> [<another-file-or-directory>...] docker run -v $PWD:/data livingdocs/file-change-hook:1.0 "echo Some file in /data changed" /data
- Varnish: https://github.com/livingdocsIO/dockerfile-varnish
- Loki & Grafana for a local setup: https://github.com/livingdocsIO/loki
- Squid, the http proxy: https://github.com/livingdocsIO/squid
Build:
buildcontainer -t livingdocs/azcopy:1.0 -f ./azcopy/Dockerfile ./azcopy
pushcontainer livingdocs/azcopy:1.0 # skip it when using dockerUse:
docker run --name azcopy livingdocs/azcopy