A plus-size FeatherWing base board that accepts an Adafruit Feather and breaks out an EYESPI connector for eInk and TFT displays.
Working with a lot of eInk and TFT displays means constantly re-wiring the EYESPI cable. This adapter cuts out that step — plug the Feather in, plug the display in, done. Single-sided board with minimal routing to keep assembly straightforward.
| Part | Package |
|---|---|
| EYESPI | 18-pin FPC connector |
| headers | Female 2.54mm vertical SMT |
| Resistor, 0Ω | 0805 |
| Feather Pin | Net | EYESPI Pin | Function |
|---|---|---|---|
| SCK | sck | 15 | SPI clock |
| MOSI | mosi | 14 | SPI data out |
| MISO | miso | 13 | SPI data in |
| D11 | rst | 11 | Reset |
| D10 | dc | 12 | Data / Command |
| D12 | busy | 3 | Busy / Ready |
| D9 | tcs | 10 | TCS chip select |
| 3V3 | 3v3 | 18 | 3.3V power |
| GND | gnd | 16 | Ground |
This project is licensed under the GNU General Public License v3.0 — see the LICENSE file for details.