GeezerVison

MIDI library for CircuitPython

TMIDI is a MIDI library for CircuitPython / MicroPython. It attempts to be a provide a simpler API and perform faster, especially for MIDI parsing, compared to adafruit_midi (adafruit_midi github) TMIDI is derived from winterbloom_smolmidi (smolmidi github) by Thea Flowers for Winterbloom.

Like adafruit_midi, TMIDI works on CircuitPython's usb_midi and busio.UART, or any stream-like object that supports .readinto() and .write()

Sending MIDI over USB. Channels are 0-indexed, so channel=0 is MIDI channel 1:

import time
import usb_midi
import tmidi

midi = tmidi.MIDI(midi_out=usb_midi.ports[1])

while True:
    midi.send(tmidi.Message(tmidi.NOTE_ON, 60, 100, channel=0))
    time.sleep(0.5)
    midi.send(tmidi.Message(tmidi.NOTE_OFF, 60, 0, channel=0))
    time.sleep(0.5)

Receiving MIDI over USB. receive() returns None when nothing has arrived:

import usb_midi
import tmidi

midi = tmidi.MIDI(midi_in=usb_midi.ports[0])

while True:
    if msg := midi.receive():
        if msg.type == tmidi.NOTE_ON:
            print("note on:", msg.note, msg.velocity, msg.channel)
        else:
            print(msg)

Instead of receive(), register functions for the message types you want and call poll(). No Message objects are allocated.

def note_on(channel, note, velocity):
    print("note on:", channel, note, velocity)

midi.on(tmidi.NOTE_ON, note_on)
while True:
    midi.poll()

See examples/tmidi_simple_poll.py for a full example.

TMIDI runs entirely in Python, but uses a faster @micropython.viper parser when your firmware can load native code. The parsers ship inside the tmidi/ library folder as tmidi_kernel.<arch>.mpy, and CircuitPython picks the one for your board. tmidi.ENGINE says which parser is in use.

TMIDI 3.0 is a folder, lib/tmidi/, instead of a single lib/tmidi.mpy. Delete an old lib/tmidi.mpy when upgrading.

To rebuild them from src/tmidi_turbo.py, use an mpy-cross from the CircuitPython version they will run on. The files land in tmidi/:

cd src
make MPY_CROSS=path/to/circuitpython/mpy-cross/build/mpy-cross

This library depends on:

• Adafruit CircuitPython

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle or individual libraries can be installed using circup.

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install circuitpython-tmidi

To install system-wide (this may be required in some cases):

sudo pip3 install circuitpython-tmidi

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .env/bin/activate
pip3 install circuitpython-tmidi

Make sure that you have circup installed in your Python environment. Install it with the following command if necessary:

pip3 install circup

With circup installed and your CircuitPython device connected use the following command to install:

circup install tmidi

Or the following command to update an existing version:

circup update

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Install pytest with pip3 install pytest circuitpython-mocks --upgrade and run pytest -v

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.