plotly.graph_objects.Scatterternary¶

class plotly.graph_objects.Scatterternary(arg=None, a=None, b=None, c=None, cliponaxis=None, connectgaps=None, customdata=None, fill=None, fillcolor=None, hoverinfo=None, hoverlabel=None, hoveron=None, hovertemplate=None, hovertemplatefallback=None, hovertext=None, ids=None, legend=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, line=None, marker=None, meta=None, mode=None, name=None, opacity=None, selected=None, selectedpoints=None, showlegend=None, subplot=None, sum=None, text=None, textfont=None, textposition=None, texttemplate=None, texttemplatefallback=None, uid=None, uirevision=None, unselected=None, visible=None, **kwargs)¶

__init__(arg=None, a=None, b=None, c=None, cliponaxis=None, connectgaps=None, customdata=None, fill=None, fillcolor=None, hoverinfo=None, hoverlabel=None, hoveron=None, hovertemplate=None, hovertemplatefallback=None, hovertext=None, ids=None, legend=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, line=None, marker=None, meta=None, mode=None, name=None, opacity=None, selected=None, selectedpoints=None, showlegend=None, subplot=None, sum=None, text=None, textfont=None, textposition=None, texttemplate=None, texttemplatefallback=None, uid=None, uirevision=None, unselected=None, visible=None, **kwargs)¶

Construct a new Scatterternary object

Provides similar functionality to the “scatter” type but on a ternary phase diagram. The data is provided by at least two arrays out of a, b, c triplets.

Parameters

• arg – dict of properties compatible with this constructor or an instance of plotly.graph_objects.Scatterternary

• a – Sets the quantity of component a in each data point. If a, b, and c are all provided, they need not be normalized, only the relative values matter. If only two arrays are provided they must be normalized to match ternary<i>.sum.

• b – Sets the quantity of component a in each data point. If a, b, and c are all provided, they need not be normalized, only the relative values matter. If only two arrays are provided they must be normalized to match ternary<i>.sum.

• c – Sets the quantity of component a in each data point. If a, b, and c are all provided, they need not be normalized, only the relative values matter. If only two arrays are provided they must be normalized to match ternary<i>.sum.

• cliponaxis – Determines whether or not markers and text nodes are clipped about the subplot axes. To show markers and text nodes above axis lines and tick labels, make sure to set xaxis.layer and yaxis.layer to below traces.

• connectgaps – Determines whether or not gaps (i.e. {nan} or missing values) in the provided data arrays are connected.

• customdata – Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, “scatter” traces also appends customdata items in the markers DOM elements

• fill – Sets the area to fill with a solid color. Use with fillcolor if not “none”. scatterternary has a subset of the options available to scatter. “toself” connects the endpoints of the trace (or each segment of the trace if it has gaps) into a closed shape. “tonext” fills the space between two traces if one completely encloses the other (eg consecutive contour lines), and behaves like “toself” if there is no trace before it. “tonext” should not be used if one trace does not enclose the other.

• fillcolor – Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available.

• hoverinfo – Determines what trace information appears on hover. If none or skip are set, no information is displayed upon hovering. But, if none is set, click and hover events are still fired.

• hoverlabel – plotly.graph_objects.scatterternary.Hoverlabel instance or dict with compatible properties

• hoveron – Do the hover effects highlight individual points (markers or line points) or do they highlight filled regions? If the fill is “toself” or “tonext” and there are no markers or text, then the default is “fills”, otherwise it is “points”.

• hovertemplate – Template string used for rendering the information that appear on hover box. Note that this will override hoverinfo. Variables are inserted using %{variable}, for example “y: %{y}” as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, “xother” will be added to those with different x positions from the first point. An underscore before or after “(x|y)other” will add a space on that side, only when this field is shown. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time-format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. Variables that can’t be found will be replaced with the specifier. For example, a template of “data: %{x}, %{y}” will result in a value of “data: 1, %{y}” if x is 1 and y is missing. Variables with an undefined value will be replaced with the fallback value. The variables available in hovertemplate are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, all attributes that can be specified per-point (the ones that are arrayOk: true) are available. Anything contained in tag <extra> is displayed in the secondary box, for example <extra>%{fullData.name}</extra>. To hide the secondary box completely, use an empty tag <extra></extra>.

• hovertemplatefallback – Fallback string that’s displayed when a variable referenced in a template is missing. If the boolean value ‘false’ is passed in, the specifier with the missing variable will be displayed.

• hovertext – Sets hover text elements associated with each (a,b,c) point. If a single string, the same string appears over all the data points. If an array of strings, the items are mapped in order to the data points in (a,b,c). To be seen, trace hoverinfo must contain a “text” flag.

• ids – Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

• legend – Sets the reference to a legend to show this trace in. References to these legends are “legend”, “legend2”, “legend3”, etc. Settings for these legends are set in the layout, under layout.legend, layout.legend2, etc.

• legendgroup – Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items.

• legendgrouptitle – plotly.graph_objects.scatterternary.Legendgroup title instance or dict with compatible properties

• legendrank – Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with “reversed” legend.traceorder they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.

• legendwidth – Sets the width (in px or fraction) of the legend for this trace.

• line – plotly.graph_objects.scatterternary.Line instance or dict with compatible properties

• marker – plotly.graph_objects.scatterternary.Marker instance or dict with compatible properties

• meta – Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace name, graph, axis and colorbar title.text, annotation text rangeselector, updatemenues and sliders label text all support meta. To access the trace meta values in an attribute in the same trace, simply use %{meta[i]} where i is the index or key of the meta item in question. To access trace meta in layout attributes, use %{data[n[.meta[i]} where i is the index or key of the meta and n is the trace index.

• mode – Determines the drawing mode for this scatter trace. If the provided mode includes “text” then the text elements appear at the coordinates. Otherwise, the text elements appear on hover. If there are less than 20 points and the trace is not stacked then the default is “lines+markers”. Otherwise, “lines”.

• name – Sets the trace name. The trace name appears as the legend item and on hover.

• opacity – Sets the opacity of the trace.

• selected – plotly.graph_objects.scatterternary.Selected instance or dict with compatible properties

• selectedpoints – Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the unselected are turned on for all points, whereas, any other non-array values means no selection all where the selected and unselected styles have no effect.

• showlegend – Determines whether or not an item corresponding to this trace is shown in the legend.

• subplot – Sets a reference between this trace’s data coordinates and a ternary subplot. If “ternary” (the default value), the data refer to layout.ternary. If “ternary2”, the data refer to layout.ternary2, and so on.

• sum – The number each triplet should sum to, if only two of a, b, and c are provided. This overrides ternary<i>.sum to normalize this specific trace, but does not affect the values displayed on the axes. 0 (or missing) means to use ternary<i>.sum

• text – Sets text elements associated with each (a,b,c) point. If a single string, the same string appears over all the data points. If an array of strings, the items are mapped in order to the data points in (a,b,c). If trace hoverinfo contains a “text” flag and “hovertext” is not set, these elements will be seen in the hover labels.

• textfont – Sets the text font.

• textposition – Sets the positions of the text elements with respects to the (x,y) coordinates.

• texttemplate – Template string used for rendering the information text that appears on points. Note that this will override textinfo. Variables are inserted using %{variable}, for example “y: %{y}”. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time-format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. Variables that can’t be found will be replaced with the specifier. For example, a template of “data: %{x}, %{y}” will result in a value of “data: 1, %{y}” if x is 1 and y is missing. Variables with an undefined value will be replaced with the fallback value. All attributes that can be specified per-point (the ones that are arrayOk: true) are available. Finally, the template string has access to variables a, b, c and text.

• texttemplatefallback – Fallback string that’s displayed when a variable referenced in a template is missing. If the boolean value ‘false’ is passed in, the specifier with the missing variable will be displayed.

• uid – Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.

• uirevision – Controls persistence of some user-driven changes to the trace: constraintrange in parcoords traces, as well as some editable: true modifications such as name and colorbar.title. Defaults to layout.uirevision. Note that other user-driven trace attribute changes are controlled by layout attributes: trace.visible is controlled by layout.legend.uirevision, selectedpoints is controlled by layout.selectionrevision, and colorbar.(x|y) (accessible with config: {editable: true}) is controlled by layout.editrevision. Trace changes are tracked by uid, which only falls back on trace index if no uid is provided. So if your app can add/remove traces before the end of the data array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a uid that stays with it as it moves.

• unselected – plotly.graph_objects.scatterternary.Unselected instance or dict with compatible properties

• visible – Determines whether or not this trace is visible. If “legendonly”, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

Returns

Return type

Scatterternary

plotly.graph_objects.scatterternary¶

class plotly.graph_objects.scatterternary.Hoverlabel(arg=None, align=None, bgcolor=None, bordercolor=None, font=None, namelength=None, showarrow=None, **kwargs)¶

property align¶

Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

The ‘align’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [‘left’, ‘right’, ‘auto’]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

property bgcolor¶

Sets the background color of the hover labels for this trace

The ‘bgcolor’ property is a color and may be specified as a string in the following formats:

• hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

• hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

• rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

• rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

• hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

• hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

• hwb (e.g. ‘hwb(0 0% 100%)’)

• lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

• color (e.g. ‘color(display-p3 1 0 0)’)

• named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

• Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

• A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property bordercolor¶

Sets the border color of the hover labels for this trace.

The ‘bordercolor’ property is a color and may be specified as a string in the following formats:

• hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

• hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

• rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

• rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

• hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

• hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

• hwb (e.g. ‘hwb(0 0% 100%)’)

• lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

• color (e.g. ‘color(display-p3 1 0 0)’)

• named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

• Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

• A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property font¶

Sets the font used in hover labels.

The ‘font’ property is an instance of Font that may be specified as:

• An instance of plotly.graph_objects.scatterternary.hoverlabel.Font

• A dict of string/value properties that will be passed to the Font constructor

Returns

Return type

plotly.graph_objects.scatterternary.hoverlabel.Font

property namelength¶

Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to namelength - 3 characters and add an ellipsis.

The ‘namelength’ property is an integer and may be specified as:

• An int (or float that will be cast to an int) in the interval [-1, 9223372036854775807]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|numpy.ndarray

property showarrow¶

Sets whether or not to show the hover label arrow/triangle pointing to the data point.

The ‘showarrow’ property is a boolean and must be specified as:

• A boolean value: True or False

Returns

Return type

bool

class plotly.graph_objects.scatterternary.Legendgrouptitle(arg=None, font=None, text=None, **kwargs)¶

property font¶

Sets this legend group’s title font.

The ‘font’ property is an instance of Font that may be specified as:

• An instance of plotly.graph_objects.scatterternary.legendgrouptitle.Font

• A dict of string/value properties that will be passed to the Font constructor

Returns

Return type

plotly.graph_objects.scatterternary.legendgrouptitle.Font

property text¶

Sets the title of the legend group.

The ‘text’ property is a string and must be specified as:

• A string

• A number that will be converted to a string

Returns

Return type

str

class plotly.graph_objects.scatterternary.Line(arg=None, backoff=None, color=None, dash=None, shape=None, smoothing=None, width=None, **kwargs)¶

property backoff¶

Sets the line back off from the end point of the nth line segment (in px). This option is useful e.g. to avoid overlap with arrowhead markers. With “auto” the lines would trim before markers if marker.angleref is set to “previous”.

The ‘backoff’ property is a number and may be specified as:

• An int or float in the interval [0, inf]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|float|numpy.ndarray

property color¶

Sets the line color.

The ‘color’ property is a color and may be specified as a string in the following formats:

• hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

• hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

• rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

• rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

• hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

• hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

• hwb (e.g. ‘hwb(0 0% 100%)’)

• lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

• color (e.g. ‘color(display-p3 1 0 0)’)

• named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

• Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

Returns

Return type

str

property dash¶

Sets the dash style of lines. Set to a dash type string (“solid”, “dot”, “dash”, “longdash”, “dashdot”, or “longdashdot”) or a dash length list in px (eg “5px,10px,2px,2px”).

The ‘dash’ property is an enumeration that may be specified as:

• One of the following dash styles:

  [‘solid’, ‘dot’, ‘dash’, ‘longdash’, ‘dashdot’, ‘longdashdot’]

• A string containing a dash length list in pixels or percentages

  (e.g. ‘5px 10px 2px 2px’, ‘5, 10, 2, 2’, ‘10% 20% 40%’, etc.)

Returns

Return type

str

property shape¶

Determines the line shape. With “spline” the lines are drawn using spline interpolation. The other available values correspond to step-wise line shapes.

The ‘shape’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [‘linear’, ‘spline’]

Returns

Return type

Any

property smoothing¶

Has an effect only if shape is set to “spline” Sets the amount of smoothing. 0 corresponds to no smoothing (equivalent to a “linear” shape).

The ‘smoothing’ property is a number and may be specified as:

• An int or float in the interval [0, 1.3]

Returns

Return type

int|float

property width¶

Sets the line width (in px).

The ‘width’ property is a number and may be specified as:

• An int or float in the interval [0, inf]

Returns

Return type

int|float

class plotly.graph_objects.scatterternary.Marker(arg=None, angle=None, angleref=None, autocolorscale=None, cauto=None, cmax=None, cmid=None, cmin=None, color=None, coloraxis=None, colorbar=None, colorscale=None, gradient=None, line=None, maxdisplayed=None, opacity=None, reversescale=None, showscale=None, size=None, sizemin=None, sizemode=None, sizeref=None, standoff=None, symbol=None, **kwargs)¶

property angle¶

Sets the marker angle in respect to angleref.

The ‘angle’ property is a angle (in degrees) that may be specified as a number between -180 and 180, or a list, numpy array or other iterable thereof. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).

Returns

Return type

int|float|numpy.ndarray

property angleref¶

Sets the reference for marker angle. With “previous”, angle 0 points along the line from the previous point to this one. With “up”, angle 0 points toward the top of the screen.

The ‘angleref’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [‘previous’, ‘up’]

Returns

Return type

Any

property autocolorscale¶

Determines whether the colorscale is a default palette (autocolorscale: true) or the palette determined by marker.colorscale. Has an effect only if in marker.color is set to a numerical array. In case colorscale is unspecified or autocolorscale is true, the default palette will be chosen according to whether numbers in the color array are all positive, all negative or mixed.

The ‘autocolorscale’ property is a boolean and must be specified as:

• A boolean value: True or False

Returns

Return type

bool

property cauto¶

Determines whether or not the color domain is computed with respect to the input data (here in marker.color) or the bounds set in marker.cmin and marker.cmax Has an effect only if in marker.color is set to a numerical array. Defaults to false when marker.cmin and marker.cmax are set by the user.

The ‘cauto’ property is a boolean and must be specified as:

• A boolean value: True or False

Returns

Return type

bool

property cmax¶

Sets the upper bound of the color domain. Has an effect only if in marker.color is set to a numerical array. Value should have the same units as in marker.color and if set, marker.cmin must be set as well.

The ‘cmax’ property is a number and may be specified as:

• An int or float

Returns

Return type

int|float

property cmid¶

Sets the mid-point of the color domain by scaling marker.cmin and/or marker.cmax to be equidistant to this point. Has an effect only if in marker.color is set to a numerical array. Value should have the same units as in marker.color. Has no effect when marker.cauto is false.

The ‘cmid’ property is a number and may be specified as:

• An int or float

Returns

Return type

int|float

property cmin¶

Sets the lower bound of the color domain. Has an effect only if in marker.color is set to a numerical array. Value should have the same units as in marker.color and if set, marker.cmax must be set as well.

The ‘cmin’ property is a number and may be specified as:

• An int or float

Returns

Return type

int|float

property color¶

Sets the marker color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to marker.cmin and marker.cmax if set.

The ‘color’ property is a color and may be specified as a string in the following formats:

• hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

• hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

• rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

• rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

• hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

• hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

• hwb (e.g. ‘hwb(0 0% 100%)’)

• lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

• color (e.g. ‘color(display-p3 1 0 0)’)

• named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

• Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

• A number that will be interpreted as a color according to scatterternary.marker.colorscale

• A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property coloraxis¶

Sets a reference to a shared color axis. References to these shared color axes are “coloraxis”, “coloraxis2”, “coloraxis3”, etc. Settings for these shared color axes are set in the layout, under layout.coloraxis, layout.coloraxis2, etc. Note that multiple color scales can be linked to the same color axis.

The ‘coloraxis’ property is an identifier of a particular subplot, of type ‘coloraxis’, that may be specified as:

• the string ‘coloraxis’ optionally followed by an integer >= 1 (e.g. ‘coloraxis’, ‘coloraxis1’, ‘coloraxis2’, ‘coloraxis3’, etc.)

Returns

Return type

str

property colorbar¶

The ‘colorbar’ property is an instance of ColorBar that may be specified as:

• An instance of plotly.graph_objects.scatterternary.marker.ColorBar

• A dict of string/value properties that will be passed to the ColorBar constructor

Returns

Return type

plotly.graph_objects.scatterternary.marker.ColorBar

property colorscale¶

Sets the colorscale. Has an effect only if in marker.color is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsla, hwb, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, [[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]. To control the bounds of the colorscale in color space, use marker.cmin and marker.cmax. Alternatively, colorscale may be a palette name string of the following list: Blackbody,B luered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic ,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

The ‘colorscale’ property is a colorscale and may be specified as:

• A list of colors that will be spaced evenly to create the colorscale. Many predefined colorscale lists are included in the sequential, diverging, and cyclical modules in the plotly.colors package.

• A list of 2-element lists where the first element is the normalized color level value (starting at 0 and ending at 1), and the second item is a valid color string. (e.g. [[0, ‘green’], [0.5, ‘red’], [1.0, ‘rgb(0, 0, 255)’]])

• One of the following named colorscales:

  [‘aggrnyl’, ‘agsunset’, ‘algae’, ‘amp’, ‘armyrose’, ‘balance’,

  ‘blackbody’, ‘bluered’, ‘blues’, ‘blugrn’, ‘bluyl’, ‘brbg’, ‘brwnyl’, ‘bugn’, ‘bupu’, ‘burg’, ‘burgyl’, ‘cividis’, ‘curl’, ‘darkmint’, ‘deep’, ‘delta’, ‘dense’, ‘earth’, ‘edge’, ‘electric’, ‘emrld’, ‘fall’, ‘geyser’, ‘gnbu’, ‘gray’, ‘greens’, ‘greys’, ‘haline’, ‘hot’, ‘hsv’, ‘ice’, ‘icefire’, ‘inferno’, ‘jet’, ‘magenta’, ‘magma’, ‘matter’, ‘mint’, ‘mrybm’, ‘mygbm’, ‘oranges’, ‘orrd’, ‘oryel’, ‘oxy’, ‘peach’, ‘phase’, ‘picnic’, ‘pinkyl’, ‘piyg’, ‘plasma’, ‘plotly3’, ‘portland’, ‘prgn’, ‘pubu’, ‘pubugn’, ‘puor’, ‘purd’, ‘purp’, ‘purples’, ‘purpor’, ‘rainbow’, ‘rdbu’, ‘rdgy’, ‘rdpu’, ‘rdylbu’, ‘rdylgn’, ‘redor’, ‘reds’, ‘solar’, ‘spectral’, ‘speed’, ‘sunset’, ‘sunsetdark’, ‘teal’, ‘tealgrn’, ‘tealrose’, ‘tempo’, ‘temps’, ‘thermal’, ‘tropic’, ‘turbid’, ‘turbo’, ‘twilight’, ‘viridis’, ‘ylgn’, ‘ylgnbu’, ‘ylorbr’, ‘ylorrd’].

  Appending ‘_r’ to a named colorscale reverses it.

Returns

Return type

str

property gradient¶

The ‘gradient’ property is an instance of Gradient that may be specified as:

• An instance of plotly.graph_objects.scatterternary.marker.Gradient

• A dict of string/value properties that will be passed to the Gradient constructor

Returns

Return type

plotly.graph_objects.scatterternary.marker.Gradient

property line¶

The ‘line’ property is an instance of Line that may be specified as:

• An instance of plotly.graph_objects.scatterternary.marker.Line

• A dict of string/value properties that will be passed to the Line constructor

Returns

Return type

plotly.graph_objects.scatterternary.marker.Line

property maxdisplayed¶

Sets a maximum number of points to be drawn on the graph. 0 corresponds to no limit.

The ‘maxdisplayed’ property is a number and may be specified as:

• An int or float in the interval [0, inf]

Returns

Return type

int|float

property opacity¶

Sets the marker opacity.

The ‘opacity’ property is a number and may be specified as:

• An int or float in the interval [0, 1]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|float|numpy.ndarray

property reversescale¶

Reverses the color mapping if true. Has an effect only if in marker.color is set to a numerical array. If true, marker.cmin will correspond to the last color in the array and marker.cmax will correspond to the first color.

The ‘reversescale’ property is a boolean and must be specified as:

• A boolean value: True or False

Returns

Return type

bool

property showscale¶

Determines whether or not a colorbar is displayed for this trace. Has an effect only if in marker.color is set to a numerical array.

The ‘showscale’ property is a boolean and must be specified as:

• A boolean value: True or False

Returns

Return type

bool

property size¶

Sets the marker size (in px).

The ‘size’ property is a number and may be specified as:

• An int or float in the interval [0, inf]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|float|numpy.ndarray

property sizemin¶

Has an effect only if marker.size is set to a numerical array. Sets the minimum size (in px) of the rendered marker points.

The ‘sizemin’ property is a number and may be specified as:

• An int or float in the interval [0, inf]

Returns

Return type

int|float

property sizemode¶

Has an effect only if marker.size is set to a numerical array. Sets the rule for which the data in size is converted to pixels.

The ‘sizemode’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [‘diameter’, ‘area’]

Returns

Return type

Any

property sizeref¶

Has an effect only if marker.size is set to a numerical array. Sets the scale factor used to determine the rendered size of marker points. Use with sizemin and sizemode.

The ‘sizeref’ property is a number and may be specified as:

• An int or float

Returns

Return type

int|float

property standoff¶

Moves the marker away from the data point in the direction of angle (in px). This can be useful for example if you have another marker at this location and you want to point an arrowhead marker at it.

The ‘standoff’ property is a number and may be specified as:

• An int or float in the interval [0, inf]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|float|numpy.ndarray

property symbol¶

Sets the marker symbol type. Adding 100 is equivalent to appending “-open” to a symbol name. Adding 200 is equivalent to appending “-dot” to a symbol name. Adding 300 is equivalent to appending “-open-dot” or “dot-open” to a symbol name.

The ‘symbol’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [0, ‘0’, ‘circle’, 100, ‘100’, ‘circle-open’, 200, ‘200’, ‘circle-dot’, 300, ‘300’, ‘circle-open-dot’, 1, ‘1’, ‘square’, 101, ‘101’, ‘square-open’, 201, ‘201’, ‘square-dot’, 301, ‘301’, ‘square-open-dot’, 2, ‘2’, ‘diamond’, 102, ‘102’, ‘diamond-open’, 202, ‘202’, ‘diamond-dot’, 302, ‘302’, ‘diamond-open-dot’, 3, ‘3’, ‘cross’, 103, ‘103’, ‘cross-open’, 203, ‘203’, ‘cross-dot’, 303, ‘303’, ‘cross-open-dot’, 4, ‘4’, ‘x’, 104, ‘104’, ‘x-open’, 204, ‘204’, ‘x-dot’, 304, ‘304’, ‘x-open-dot’, 5, ‘5’, ‘triangle-up’, 105, ‘105’, ‘triangle-up-open’, 205, ‘205’, ‘triangle-up-dot’, 305, ‘305’, ‘triangle-up-open-dot’, 6, ‘6’, ‘triangle-down’, 106, ‘106’, ‘triangle-down-open’, 206, ‘206’, ‘triangle-down-dot’, 306, ‘306’, ‘triangle-down-open-dot’, 7, ‘7’, ‘triangle-left’, 107, ‘107’, ‘triangle-left-open’, 207, ‘207’, ‘triangle-left-dot’, 307, ‘307’, ‘triangle-left-open-dot’, 8, ‘8’, ‘triangle-right’, 108, ‘108’, ‘triangle-right-open’, 208, ‘208’, ‘triangle-right-dot’, 308, ‘308’, ‘triangle-right-open-dot’, 9, ‘9’, ‘triangle-ne’, 109, ‘109’, ‘triangle-ne-open’, 209, ‘209’, ‘triangle-ne-dot’, 309, ‘309’, ‘triangle-ne-open-dot’, 10, ‘10’, ‘triangle-se’, 110, ‘110’, ‘triangle-se-open’, 210, ‘210’, ‘triangle-se-dot’, 310, ‘310’, ‘triangle-se-open-dot’, 11, ‘11’, ‘triangle-sw’, 111, ‘111’, ‘triangle-sw-open’, 211, ‘211’, ‘triangle-sw-dot’, 311, ‘311’, ‘triangle-sw-open-dot’, 12, ‘12’, ‘triangle-nw’, 112, ‘112’, ‘triangle-nw-open’, 212, ‘212’, ‘triangle-nw-dot’, 312, ‘312’, ‘triangle-nw-open-dot’, 13, ‘13’, ‘pentagon’, 113, ‘113’, ‘pentagon-open’, 213, ‘213’, ‘pentagon-dot’, 313, ‘313’, ‘pentagon-open-dot’, 14, ‘14’, ‘hexagon’, 114, ‘114’, ‘hexagon-open’, 214, ‘214’, ‘hexagon-dot’, 314, ‘314’, ‘hexagon-open-dot’, 15, ‘15’, ‘hexagon2’, 115, ‘115’, ‘hexagon2-open’, 215, ‘215’, ‘hexagon2-dot’, 315, ‘315’, ‘hexagon2-open-dot’, 16, ‘16’, ‘octagon’, 116, ‘116’, ‘octagon-open’, 216, ‘216’, ‘octagon-dot’, 316, ‘316’, ‘octagon-open-dot’, 17, ‘17’, ‘star’, 117, ‘117’, ‘star-open’, 217, ‘217’, ‘star-dot’, 317, ‘317’, ‘star-open-dot’, 18, ‘18’, ‘hexagram’, 118, ‘118’, ‘hexagram-open’, 218, ‘218’, ‘hexagram-dot’, 318, ‘318’, ‘hexagram-open-dot’, 19, ‘19’, ‘star-triangle-up’, 119, ‘119’, ‘star-triangle-up-open’, 219, ‘219’, ‘star-triangle-up-dot’, 319, ‘319’, ‘star-triangle-up-open-dot’, 20, ‘20’, ‘star-triangle-down’, 120, ‘120’, ‘star-triangle-down-open’, 220, ‘220’, ‘star-triangle-down-dot’, 320, ‘320’, ‘star-triangle-down-open-dot’, 21, ‘21’, ‘star-square’, 121, ‘121’, ‘star-square-open’, 221, ‘221’, ‘star-square-dot’, 321, ‘321’, ‘star-square-open-dot’, 22, ‘22’, ‘star-diamond’, 122, ‘122’, ‘star-diamond-open’, 222, ‘222’, ‘star-diamond-dot’, 322, ‘322’, ‘star-diamond-open-dot’, 23, ‘23’, ‘diamond-tall’, 123, ‘123’, ‘diamond-tall-open’, 223, ‘223’, ‘diamond-tall-dot’, 323, ‘323’, ‘diamond-tall-open-dot’, 24, ‘24’, ‘diamond-wide’, 124, ‘124’, ‘diamond-wide-open’, 224, ‘224’, ‘diamond-wide-dot’, 324, ‘324’, ‘diamond-wide-open-dot’, 25, ‘25’, ‘hourglass’, 125, ‘125’, ‘hourglass-open’, 26, ‘26’, ‘bowtie’, 126, ‘126’, ‘bowtie-open’, 27, ‘27’, ‘circle-cross’, 127, ‘127’, ‘circle-cross-open’, 28, ‘28’, ‘circle-x’, 128, ‘128’, ‘circle-x-open’, 29, ‘29’, ‘square-cross’, 129, ‘129’, ‘square-cross-open’, 30, ‘30’, ‘square-x’, 130, ‘130’, ‘square-x-open’, 31, ‘31’, ‘diamond-cross’, 131, ‘131’, ‘diamond-cross-open’, 32, ‘32’, ‘diamond-x’, 132, ‘132’, ‘diamond-x-open’, 33, ‘33’, ‘cross-thin’, 133, ‘133’, ‘cross-thin-open’, 34, ‘34’, ‘x-thin’, 134, ‘134’, ‘x-thin-open’, 35, ‘35’, ‘asterisk’, 135, ‘135’, ‘asterisk-open’, 36, ‘36’, ‘hash’, 136, ‘136’, ‘hash-open’, 236, ‘236’, ‘hash-dot’, 336, ‘336’, ‘hash-open-dot’, 37, ‘37’, ‘y-up’, 137, ‘137’, ‘y-up-open’, 38, ‘38’, ‘y-down’, 138, ‘138’, ‘y-down-open’, 39, ‘39’, ‘y-left’, 139, ‘139’, ‘y-left-open’, 40, ‘40’, ‘y-right’, 140, ‘140’, ‘y-right-open’, 41, ‘41’, ‘line-ew’, 141, ‘141’, ‘line-ew-open’, 42, ‘42’, ‘line-ns’, 142, ‘142’, ‘line-ns-open’, 43, ‘43’, ‘line-ne’, 143, ‘143’, ‘line-ne-open’, 44, ‘44’, ‘line-nw’, 144, ‘144’, ‘line-nw-open’, 45, ‘45’, ‘arrow-up’, 145, ‘145’, ‘arrow-up-open’, 46, ‘46’, ‘arrow-down’, 146, ‘146’, ‘arrow-down-open’, 47, ‘47’, ‘arrow-left’, 147, ‘147’, ‘arrow-left-open’, 48, ‘48’, ‘arrow-right’, 148, ‘148’, ‘arrow-right-open’, 49, ‘49’, ‘arrow-bar-up’, 149, ‘149’, ‘arrow-bar-up-open’, 50, ‘50’, ‘arrow-bar-down’, 150, ‘150’, ‘arrow-bar-down-open’, 51, ‘51’, ‘arrow-bar-left’, 151, ‘151’, ‘arrow-bar-left-open’, 52, ‘52’, ‘arrow-bar-right’, 152, ‘152’, ‘arrow-bar-right-open’, 53, ‘53’, ‘arrow’, 153, ‘153’, ‘arrow-open’, 54, ‘54’, ‘arrow-wide’, 154, ‘154’, ‘arrow-wide-open’]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

class plotly.graph_objects.scatterternary.Selected(arg=None, marker=None, textfont=None, **kwargs)¶

property marker¶

The ‘marker’ property is an instance of Marker that may be specified as:

• An instance of plotly.graph_objects.scatterternary.selected.Marker

• A dict of string/value properties that will be passed to the Marker constructor

Returns

Return type

plotly.graph_objects.scatterternary.selected.Marker

property textfont¶

The ‘textfont’ property is an instance of Textfont that may be specified as:

• An instance of plotly.graph_objects.scatterternary.selected.Textfont

• A dict of string/value properties that will be passed to the Textfont constructor

Returns

Return type

plotly.graph_objects.scatterternary.selected.Textfont

class plotly.graph_objects.scatterternary.Textfont(arg=None, color=None, family=None, lineposition=None, shadow=None, size=None, style=None, textcase=None, variant=None, weight=None, **kwargs)¶

property color¶

The ‘color’ property is a color and may be specified as a string in the following formats:

• hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

• hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

• rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

• rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

• hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

• hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

• hwb (e.g. ‘hwb(0 0% 100%)’)

• lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

• color (e.g. ‘color(display-p3 1 0 0)’)

• named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

• Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

• A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property family¶

HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren’t available.

The ‘family’ property is a string and must be specified as:

• A non-empty string

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

str|numpy.ndarray

property lineposition¶

Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

The ‘lineposition’ property is a flaglist and may be specified as a string containing:

• Any combination of [‘under’, ‘over’, ‘through’] joined with ‘+’ characters (e.g. ‘under+over’) OR exactly one of [‘none’] (e.g. ‘none’)

• A list or array of the above

Returns

Return type

Any|numpy.ndarray

property shadow¶

Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

The ‘shadow’ property is a string and must be specified as:

• A string

• A number that will be converted to a string

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

str|numpy.ndarray

property size¶

The ‘size’ property is a number and may be specified as:

• An int or float in the interval [1, inf]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|float|numpy.ndarray

property style¶

Sets whether a font should be styled with a normal or italic face from its family.

The ‘style’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [‘normal’, ‘italic’]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

property textcase¶

Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

The ‘textcase’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [‘normal’, ‘word caps’, ‘upper’, ‘lower’]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

property variant¶

Sets the variant of the font.

The ‘variant’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [‘normal’, ‘small-caps’, ‘all-small-caps’, ‘all-petite-caps’, ‘petite-caps’, ‘unicase’]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

property weight¶

Sets the weight (or boldness) of the font.

The ‘weight’ property is an integer and may be specified as:

• An int (or float that will be cast to an int) in the interval [1, 1000] OR exactly one of [‘normal’, ‘bold’] (e.g. ‘bold’)

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|numpy.ndarray

class plotly.graph_objects.scatterternary.Unselected(arg=None, marker=None, textfont=None, **kwargs)¶

property marker¶

The ‘marker’ property is an instance of Marker that may be specified as:

• An instance of plotly.graph_objects.scatterternary.unselected.Marker

• A dict of string/value properties that will be passed to the Marker constructor

Returns

Return type

plotly.graph_objects.scatterternary.unselected.Marker

property textfont¶

The ‘textfont’ property is an instance of Textfont that may be specified as:

• An instance of plotly.graph_objects.scatterternary.unselected.Textfont

• A dict of string/value properties that will be passed to the Textfont constructor

Returns

Return type

plotly.graph_objects.scatterternary.unselected.Textfont