GeezerVison

Copy link

Copy Markdown

Contributor

rytilahti approved these changes Jan 14, 2025

View reviewed changes

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

@@            Coverage Diff             @@
##           master    #1452      +/-   ##
==========================================
+ Coverage   92.32%   92.41%   +0.09%     
==========================================
  Files         134      137       +3     
  Lines        8511     8614     +103     
  Branches      874      876       +2     
==========================================
+ Hits         7858     7961     +103     
  Misses        477      477              
  Partials      176      176              

sdb9696 deleted the feat/smartcam_battery branch January 14, 2025 21:57

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\#1449](#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\#1340](#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\#1297](#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\#1451](#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\#937](#937)
- Add common alarm interface [\#1479](#1479) (@sdb9696)
- Add common childsetup interface [\#1470](#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\#1469](#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\#1465](#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\#1462](#1462) (@rytilahti)
- Add childlock module for vacuums [\#1461](#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\#1459](#1459) (@rytilahti)
- Add setting to change carpet clean mode [\#1458](#1458) (@rytilahti)
- Add setting to change clean count [\#1457](#1457) (@rytilahti)
- Add mop module [\#1456](#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\#1454](#1454) (@sdb9696)
- Expose current cleaning information [\#1453](#1453) (@rytilahti)
- Add battery module to smartcam devices [\#1452](#1452) (@sdb9696)
- Allow update of camera modules after setting values [\#1450](#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\#1438](#1438) (@sdb9696)
- Add support for doorbells and chimes [\#1435](#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\#1423](#1423) (@rytilahti)
- Allow https for klaptransport [\#1415](#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\#1413](#1413) (@sdb9696)
- Add powerprotection module [\#1337](#1337) (@rytilahti)
- Add vacuum speaker controls [\#1332](#1332) (@rytilahti)
- Add consumables module for vacuums [\#1327](#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\#1263](#1263) (@ryenitcher)
- Add support for cleaning records [\#945](#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\#944](#944) (@rytilahti)
- Add support for pairing devices with hubs [\#859](#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\#637](#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\#1486](#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\#1485](#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\#1483](#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\#1480](#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\#1443](#1443) (@rytilahti)
- Fix discover cli command with host [\#1437](#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\#1420](#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\#639](#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\#1476](#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\#1475](#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\#1466](#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\#1448](#1448) (@sdb9696)
- Add fixture for C720 camera [\#1433](#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\#1482](#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\#1481](#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\#1477](#1477) (@sdb9696)
- Add error code 7 for clean module [\#1474](#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\#1471](#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\#1455](#1455) (@rytilahti)
- Add required sphinx.configuration [\#1446](#1446) (@rytilahti)
- Add more redactors for smartcams [\#1439](#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\#1430](#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\#1428](#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\#1427](#1427) (@sdb9696)

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)