GeezerVison

The World Wide Web, restored to 800 pixels of glory.

GeezerVison is showing github.com — Add support for pairing devices with hubs by rytilahti · Pull Request #859 · python-kasa/python-kasa

Conversation

rytilahti commented Apr 23, 2024 •

edited

Loading

Uh oh!

There was an error while loading. Please reload this page.

Copy link

Copy Markdown

Member

This implements "child_quick_setup" that allows pairing and unpairing devices with a hub.
Three new cli commands are added to make the process smooth:

kasa hub list lists current children and their device ids
kasa hub pair searches for unpaired devices and performs pairing after something is discovered. The search ends immediately after finding the first device that can be paired.
kasa hub unpair <device_id> allows unpairing an existing device.
kasa hub supported to list supported device categories.

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

All reactions

rytilahti added the enhancement New feature or request label

Apr 23, 2024

codecov Bot commented Apr 23, 2024 •

edited

Loading

Uh oh!

There was an error while loading. Please reload this page.

Copy link

Copy Markdown

Codecov Report

Attention: Patch coverage is 78.49462% with 20 lines in your changes missing coverage. Please review.

Project coverage is 92.47%. Comparing base (980f6a3) to head (c5c09e2).
Report is 43 commits behind head on master.

Files with missing lines	Patch %	Lines
kasa/cli/hub.py	66.66%	12 Missing and 5 partials ⚠️
kasa/smart/modules/childsetup.py	91.89%	2 Missing and 1 partial ⚠️

Additional details and impacted files

@@            Coverage Diff             @@
##           master     #859      +/-   ##
==========================================
- Coverage   92.60%   92.47%   -0.14%     
==========================================
  Files         139      142       +3     
  Lines        8760     8874     +114     
  Branches      889      899      +10     
==========================================
+ Hits         8112     8206      +94     
- Misses        473      487      +14     
- Partials      175      181       +6

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

All reactions

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

rytilahti force-pushed the feat/hub_pairing branch from b6d5eb1 to c669835 Compare

April 24, 2024 16:57

rytilahti commented May 2, 2024

Copy link

Copy Markdown

Member Author

Just to avoid forgetting about it, pairing/removing a device will require us to perform the initial update again in the main device to initialize the newly added devices. Currently the subsequent updates will receive a new device, but the children is not updated accordingly.

For homeassistant UX, we will also need a way to re-trigger platform initialization for the new device.

All reactions

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

rytilahti force-pushed the feat/hub_pairing branch from c669835 to 7f302aa Compare

May 4, 2024 13:35

rytilahti force-pushed the feat/hub_pairing branch from 7f302aa to 803e88d Compare

June 15, 2024 00:44

rytilahti commented

Jun 15, 2024

View reviewed changes

Comment thread

kasa/smart/smartdevice.py Resolved

Uh oh!

There was an error while loading. Please reload this page.

Comment thread

kasa/smart/smartdevice.py Resolved

Uh oh!

There was an error while loading. Please reload this page.

Comment thread

kasa/tests/test_feature.py Resolved

Uh oh!

There was an error while loading. Please reload this page.

rytilahti requested a review from sdb9696

June 15, 2024 00:54

rytilahti commented Jun 15, 2024

Copy link

Copy Markdown

Member Author

We will probably want to disable pairing on home assistant until we have a plan how to work with additions and removals on the fly, but it would be nice to get this PR in nevertheless.

All reactions

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

sdb9696 requested changes

Jun 17, 2024

View reviewed changes

sdb9696 left a comment

Copy link

Copy Markdown

Contributor

There was a problem hiding this comment.

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

I updated the PR to master and to use the error cli command. Some comments here on the renegotiation which feels like it's clearing a bit too much just to pickup new children. I think the module could call dev.update with a new kwarg to keep things simple.

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

All reactions

Comment thread

kasa/smart/modules/childsetup.py Outdated

Comment on lines +50 to +44

		async def pair(self, *, timeout=10):
		"""Scan for new devices and pair after discovering first new device."""

sdb9696 Jun 17, 2024

Copy link

Copy Markdown

Contributor

There was a problem hiding this comment.

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

It seems like this function is non-deterministic as to whether it will pair one or more devices depending on how many are discovered during the 0.5 sleep? Maybe there should be two features pair_all and pair_next with pair all waiting the full timeout?

Also what happens if you keep scanning instead of breaking? Do you keep getting more devices and child_device_list contains an increasing number or does it exclude previously returned devices?

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

All reactions

rytilahti Jan 15, 2025

Copy link

Copy Markdown

Member Author

There was a problem hiding this comment.

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

I can give this one a try with multiple devices in the pairing mode. I'd guess we would receive a list of them, but who knows.

On pair_all vs. pair_next, I'm not sure if we really want to make this more complex than necessary. If someone sets several devices into a pairing mode and only one is picked, they are feel free to retry again.

Or do we want to provide a way to select which devices to pair? If so, maybe we need to think a bit more about this :-)

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

Closed

sdb9696 added the no-stale label

Sep 27, 2024

rytilahti commented

Jan 15, 2025

View reviewed changes

Comment thread

kasa/smart/smartdevice.py Resolved

Uh oh!

There was an error while loading. Please reload this page.

Comment thread

kasa/smart/modules/childsetup.py Resolved

Uh oh!

There was an error while loading. Please reload this page.

Comment thread

kasa/tests/test_feature.py Resolved

Uh oh!

There was an error while loading. Please reload this page.

Comment thread

kasa/smart/modules/childsetup.py Outdated

Comment on lines +50 to +44

		async def pair(self, *, timeout=10):
		"""Scan for new devices and pair after discovering first new device."""

rytilahti Jan 15, 2025

Copy link

Copy Markdown

Member Author

There was a problem hiding this comment.

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

I can give this one a try with multiple devices in the pairing mode. I'd guess we would receive a list of them, but who knows.

Or do we want to provide a way to select which devices to pair? If so, maybe we need to think a bit more about this :-)

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

All reactions

Comment thread

kasa/cli.py Resolved

Uh oh!

There was an error while loading. Please reload this page.

rytilahti added 4 commits

January 16, 2025 12:32


          Add support for pairing devices

07857af


          Add 'Pair' action

1f240a3


          Add tests and refactor

d8b067f


          Rebase on top of current master

017271e

rytilahti force-pushed the feat/hub_pairing branch from 2cbe305 to 017271e Compare

January 16, 2025 11:46

rytilahti added 3 commits

January 16, 2025 13:01


          Re-add fakeprotocol implementations and fix tests

ebbfa32


          Simplify pairing process, support pairing multiple devices at once, a…

18e8a2c

…llow listing supported categories


          Add get_scan_child_device_list with two detected devices to h100 fixture

300639c

sdb9696 requested changes

Jan 17, 2025

View reviewed changes

sdb9696 left a comment

Copy link

Copy Markdown

Contributor

There was a problem hiding this comment.

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Looking good! A few minor nits.

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

There was an error while loading. Please reload this page.

rytilahti and others added 5 commits

January 17, 2025 13:21


          Apply suggestions from code review

c34aa71

Co-authored-by: Steven B. <[email protected]>


          Some improvements based on code review

837b68f


          devices_smart->hubs_smart

71a81d5


          Add unpair to child devices

cf1ad89


          Check for prereqs in group + minor cleanups

aeb4705

rytilahti mentioned this pull request

Jan 17, 2025

Add pair/unpair buttons for tplink home-assistant/core#135847

Merged

1 of 19 tasks

rytilahti added 2 commits

January 17, 2025 14:58


          Log end user relevant logs into info logger

6a0d3be


          Merge remote-tracking branch 'upstream/master' into feat/hub_pairing

fc48009

rytilahti and others added 2 commits

January 17, 2025 15:14


          Update tests/fakeprotocol_smart.py

a4ffdcd

Co-authored-by: Steven B. <[email protected]>


          Fix tests

1188acb

sdb9696 approved these changes

Jan 17, 2025

View reviewed changes

sdb9696 left a comment

Copy link

Copy Markdown

Contributor

There was a problem hiding this comment.

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Looks good to me, let's merge once tests pass!

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

rytilahti reacted with rocket emoji

All reactions

🚀 1 reaction

rytilahti and others added 3 commits

January 17, 2025 22:15


          Move hub tests into its own package and implement unpair

bef3f65


          Cleanup a bit

ab04ab8


          Fix tests and remove explicit unpair method from child device

c5c09e2

sdb9696 changed the title ~~Add support for pairing devices~~ Add support for pairing devices with hubs

Jan 20, 2025

sdb9696 merged commit bca5576 into master

Jan 20, 2025

sdb9696 deleted the feat/hub_pairing branch

January 20, 2025 10:36

rytilahti commented Jan 20, 2025

Copy link

Copy Markdown

Member Author

Thanks for taking care of the tests, @sdb9696! 🥇

All reactions

Sorry, something went wrong.

Uh oh!

There was an error while loading. Please reload this page.

rytilahti added a commit that referenced this pull request

Jan 20, 2025


          Add support for pairing devices with hubs (#859)

478cb53

Co-authored-by: Steven B. <[email protected]>

sdb9696 mentioned this pull request

Jan 22, 2025

Prepare 0.10.0 #1473

Merged

sdb9696 added a commit that referenced this pull request

Jan 26, 2025


          Prepare 0.10.0 (#1473)

09e73fa

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\#1449](#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\#1340](#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\#1297](#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\#1451](#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\#937](#937)
- Add common alarm interface [\#1479](#1479) (@sdb9696)
- Add common childsetup interface [\#1470](#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\#1469](#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\#1465](#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\#1462](#1462) (@rytilahti)
- Add childlock module for vacuums [\#1461](#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\#1459](#1459) (@rytilahti)
- Add setting to change carpet clean mode [\#1458](#1458) (@rytilahti)
- Add setting to change clean count [\#1457](#1457) (@rytilahti)
- Add mop module [\#1456](#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\#1454](#1454) (@sdb9696)
- Expose current cleaning information [\#1453](#1453) (@rytilahti)
- Add battery module to smartcam devices [\#1452](#1452) (@sdb9696)
- Allow update of camera modules after setting values [\#1450](#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\#1438](#1438) (@sdb9696)
- Add support for doorbells and chimes [\#1435](#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\#1423](#1423) (@rytilahti)
- Allow https for klaptransport [\#1415](#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\#1413](#1413) (@sdb9696)
- Add powerprotection module [\#1337](#1337) (@rytilahti)
- Add vacuum speaker controls [\#1332](#1332) (@rytilahti)
- Add consumables module for vacuums [\#1327](#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\#1263](#1263) (@ryenitcher)
- Add support for cleaning records [\#945](#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\#944](#944) (@rytilahti)
- Add support for pairing devices with hubs [\#859](#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\#637](#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\#1486](#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\#1485](#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\#1483](#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\#1480](#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\#1443](#1443) (@rytilahti)
- Fix discover cli command with host [\#1437](#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\#1420](#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\#639](#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\#1476](#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\#1475](#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\#1466](#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\#1448](#1448) (@sdb9696)
- Add fixture for C720 camera [\#1433](#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\#1482](#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\#1481](#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\#1477](#1477) (@sdb9696)
- Add error code 7 for clean module [\#1474](#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\#1471](#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\#1455](#1455) (@rytilahti)
- Add required sphinx.configuration [\#1446](#1446) (@rytilahti)
- Add more redactors for smartcams [\#1439](#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\#1430](#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\#1428](#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\#1427](#1427) (@sdb9696)

rytilahti added a commit to rytilahti/python-kasa that referenced this pull request

Aug 31, 2025


          Add support for pairing devices with hubs (python-kasa#859)

13ff961

Co-authored-by: Steven B. <[email protected]>

rytilahti pushed a commit to rytilahti/python-kasa that referenced this pull request

Aug 31, 2025


          Prepare 0.10.0 (python-kasa#1473)

a11b953

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)

rytilahti added a commit to rytilahti/python-kasa that referenced this pull request

Oct 26, 2025


          Add support for pairing devices with hubs (python-kasa#859)

91a661c

Co-authored-by: Steven B. <[email protected]>

rytilahti pushed a commit to rytilahti/python-kasa that referenced this pull request

Oct 26, 2025


          Prepare 0.10.0 (python-kasa#1473)

4577b2c

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)

rytilahti added a commit to rytilahti/python-kasa that referenced this pull request

Nov 10, 2025


          Add support for pairing devices with hubs (python-kasa#859)

3cbac46

Co-authored-by: Steven B. <[email protected]>

rytilahti pushed a commit to rytilahti/python-kasa that referenced this pull request

Nov 10, 2025


          Prepare 0.10.0 (python-kasa#1473)

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)

rytilahti added a commit to rytilahti/python-kasa that referenced this pull request

Jul 5, 2026


          Add support for pairing devices with hubs (python-kasa#859)

3dc5e95

Co-authored-by: Steven B. <[email protected]>

rytilahti pushed a commit to rytilahti/python-kasa that referenced this pull request

Jul 5, 2026


          Prepare 0.10.0 (python-kasa#1473)

309dc46

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)

pillarsdotnet pushed a commit to pillarsdotnet/python-kasa that referenced this pull request

Oct 22, 2026


          Add support for pairing devices with hubs (python-kasa#859)

b6b9b28

Co-authored-by: Steven B. <[email protected]>

pillarsdotnet pushed a commit to pillarsdotnet/python-kasa that referenced this pull request

Oct 22, 2026


          Prepare 0.10.0 (python-kasa#1473)

e37cf64

## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)

Reviewers

sdb9696

sdb9696 approved these changes

Uh oh!

There was an error while loading. Please reload this page.

Assignees

No one assigned

Labels

enhancement

New feature or request

no-stale

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

Uh oh!

There was an error while loading. Please reload this page.

2 participants

Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.

You are visitor 01402503 — GeezerVison does not store the pages you look up.
Best viewed with Netscape Navigator 4.7 or Internet Explorer 6 at 800×600. No cookies required.

GeezerVison

Conversation

rytilahti commented Apr 23, 2024 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

codecov Bot commented Apr 23, 2024 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Codecov Report

Uh oh!

rytilahti commented May 2, 2024

Uh oh!

Uh oh!

Uh oh!

Uh oh!

rytilahti commented Jun 15, 2024

Uh oh!

sdb9696 left a comment

Choose a reason for hiding this comment

Uh oh!

sdb9696 Jun 17, 2024

Choose a reason for hiding this comment

Uh oh!

rytilahti Jan 15, 2025

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

rytilahti Jan 15, 2025

Choose a reason for hiding this comment

Uh oh!

Uh oh!

sdb9696 left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

sdb9696 left a comment

Choose a reason for hiding this comment

Uh oh!

rytilahti commented Jan 20, 2025

Uh oh!

Reviewers

Uh oh!

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

rytilahti commented Apr 23, 2024 •

edited

Loading

Uh oh!

There was an error while loading. Please reload this page.

codecov Bot commented Apr 23, 2024 •

edited

Loading

Uh oh!

There was an error while loading. Please reload this page.