GeezerVisonThe World Wide Web, restored to 800 pixels of glory. | |||||||||||||||||
| Home|About|Gaming cabinet|Archives|How it works|Starter sites | |||||||||||||||||
GeezerVison is showing github.com — Add L430P(EU) device fixture by LostLuma · Pull Request #1607 · python-kasa/python-kasa Conversation
|
Codecov Report✅ All modified and coverable lines are covered by tests. Additional details and impacted files@@ Coverage Diff @@ ## master #1607 +/- ## ======================================= Coverage 92.82% 92.82% ======================================= Files 157 157 Lines 9642 9642 Branches 976 976 ======================================= Hits 8950 8950 Misses 492 492 Partials 200 200 ☔ View full report in Codecov by Sentry. 🚀 New features to boost your workflow:
|
All reactions
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
Collaborator
|
@LostLuma I would put it with the BULBS_SMART_COLOR and BULBS_SMART_VARIABLE_TEMP. It has color range along with temperature, so that would cover it all. |
All reactions
-
👍 2 reactions
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
Signed-off-by: Lilly Rose Berner <[email protected]>
LostLuma
force-pushed
the
feature/l403p-fixture
branch
from
November 10, 2025 19:31
206bd16 to
b52bdd6
Compare
rytilahti
approved these changes
Nov 10, 2025
rytilahti
left a comment
Member
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
Thanks for the fixture! I presume this device is working without issues?
I recall a report by someone with a new bulb model having some issues in home assistant. As the tests are green, the library part should be working as expected and I'll just merge this.
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
All reactions
| "rule_list": [] | ||
| }, | ||
| "get_device_info": { | ||
| "auto_biorhythm_light_enable": false, |
Member
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
This is a new, previously unknown key. Should not affect functionality, but it might be something we should support at some point.
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
All reactions
Uh oh!
There was an error while loading. Please reload this page.
Contributor
Author
|
The bulb has been working as expected in Home Assistant as far as I can tell (it's the first smart bulb I own). |
All reactions
-
❤️ 1 reaction
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
Member
|
home-assistant/core#155732 is the issue, looks like it's the very same model, so maybe this device behaves a bit differently than expected in some configurations.. |
All reactions
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
Contributor
Author
|
Changing the color temperature works as expected from Home Assistant for me fwiw. |
All reactions
-
🎉 1 reaction
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
rytilahti
pushed a commit
to rytilahti/python-kasa
that referenced
this pull request
Jul 5, 2026
Signed-off-by: Lilly Rose Berner <[email protected]>
Merged
rytilahti
added a commit
that referenced
this pull request
Oct 4, 2026
## [0.11.0](https://github.com/python-kasa/python-kasa/tree/0.11.0) (2026-10-04) [Full Changelog](0.10.2...0.11.0) **Release summary:** This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\#1551](#1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\#1771](#1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\#1762](#1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\#1757](#1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\#1749](#1749) (@nopoz) - Expose the light transition state change flag [\#1745](#1745) (@nopoz) - Add strip segment module for configurable light strip length [\#1744](#1744) (@nopoz) - Add KL400L5 color temperature range [\#1719](#1719) (@loganrosen) - Update smartcam credential handling and tests [\#1664](#1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\#1663](#1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\#1660](#1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\#1639](#1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\#1638](#1638) (@ZeliardM) - Add preset support for Tapo cameras [\#1615](#1615) (@mrwogu) - Add python 3.14 to supported versions [\#1599](#1599) (@rytilahti) - Add discovery port 20004 [\#1595](#1595) (@alams154) - Implement IOT Time Module Failover [\#1583](#1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\#1566](#1566) (@ZeliardM) - Extend smartcam detection support [\#1552](#1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\#1613](#1613) - 'No time zone found with key EST' in debian 13 [\#1579](#1579) - Discovery: accept cameras that only send the encrypt\_type list [\#1770](#1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \#1740\) [\#1769](#1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\#1768](#1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\#1761](#1761) (@juherr) - Disable multi requests on timeout during multi-request [\#1759](#1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\#1755](#1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\#1743](#1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\#1731](#1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\#1668](#1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\#1667](#1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\#1659](#1659) (@ZeliardM) - Fix camera login version in CLI [\#1658](#1658) (@ZeliardM) - Allow SSL connections to older devices [\#1654](#1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\#1614](#1614) (@rytilahti) - Add hold state to thermostatstate [\#1609](#1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\#1598](#1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\#1588](#1588) (@rytilahti) - Fix iotstrip child device time handling [\#1584](#1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\#1760](#1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\#1746](#1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\#1726](#1726) (@Krotu) - Add L530EA\(EU\) device fixture [\#1694](#1694) (@ZeliardM) - Add C101 test fixture [\#1673](#1673) (@ijaron) - Add LB130\(US\) device fixture [\#1669](#1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\#1657](#1657) (@ZeliardM) - Add TS15\(US\) device fixture [\#1649](#1649) (@ZeliardM) - Add Tapo C460 support [\#1645](#1645) (@markvanpraet) - Add P105\(US\) device fixture [\#1644](#1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\#1643](#1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\#1607](#1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\#1569](#1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\#1568](#1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\#1545](#1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\#1539](#1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\#1538](#1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\#1515](#1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\#1509](#1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\#1517](#1517) - docs: modernize docstrings across the repository [\#1682](#1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\#1512](#1512) (@rytilahti) **Project maintenance:** - tests: add type annotations to top-level test files [\#1688](#1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\#1687](#1687) (@ZeliardM) - tests: add type annotations to Smart tests [\#1686](#1686) (@ZeliardM) - tests: add type annotations to IoT tests [\#1685](#1685) (@ZeliardM) - tests: add type annotations to transport tests [\#1684](#1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\#1683](#1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\#1681](#1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\#1677](#1677) (@ZeliardM) - Update GitHub Workflows and Actions [\#1622](#1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\#1587](#1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\#1585](#1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\#1597](#1597) - HS300 Child State - Time Module Error [\#1445](#1445)
Merged
rytilahti
added a commit
that referenced
this pull request
Oct 4, 2026
## [0.11.0.1](https://github.com/python-kasa/python-kasa/tree/0.11.0.1) (2026-10-04) [Full Changelog](0.10.2...0.11.0.1) **Release summary:** *Note: 0.11.0 was tagged but never published to PyPI due to a packaging issue. 0.11.0.1 contains the same changes plus a fix for the release workflow.* This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\#1551](#1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\#1771](#1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\#1762](#1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\#1757](#1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\#1749](#1749) (@nopoz) - Expose the light transition state change flag [\#1745](#1745) (@nopoz) - Add strip segment module for configurable light strip length [\#1744](#1744) (@nopoz) - Add KL400L5 color temperature range [\#1719](#1719) (@loganrosen) - Update smartcam credential handling and tests [\#1664](#1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\#1663](#1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\#1660](#1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\#1639](#1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\#1638](#1638) (@ZeliardM) - Add preset support for Tapo cameras [\#1615](#1615) (@mrwogu) - Add python 3.14 to supported versions [\#1599](#1599) (@rytilahti) - Add discovery port 20004 [\#1595](#1595) (@alams154) - Implement IOT Time Module Failover [\#1583](#1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\#1566](#1566) (@ZeliardM) - Extend smartcam detection support [\#1552](#1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\#1613](#1613) - 'No time zone found with key EST' in debian 13 [\#1579](#1579) - Discovery: accept cameras that only send the encrypt\_type list [\#1770](#1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \#1740\) [\#1769](#1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\#1768](#1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\#1761](#1761) (@juherr) - Disable multi requests on timeout during multi-request [\#1759](#1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\#1755](#1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\#1743](#1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\#1731](#1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\#1668](#1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\#1667](#1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\#1659](#1659) (@ZeliardM) - Fix camera login version in CLI [\#1658](#1658) (@ZeliardM) - Allow SSL connections to older devices [\#1654](#1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\#1614](#1614) (@rytilahti) - Add hold state to thermostatstate [\#1609](#1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\#1598](#1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\#1588](#1588) (@rytilahti) - Fix iotstrip child device time handling [\#1584](#1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\#1760](#1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\#1746](#1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\#1726](#1726) (@Krotu) - Add L530EA\(EU\) device fixture [\#1694](#1694) (@ZeliardM) - Add C101 test fixture [\#1673](#1673) (@ijaron) - Add LB130\(US\) device fixture [\#1669](#1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\#1657](#1657) (@ZeliardM) - Add TS15\(US\) device fixture [\#1649](#1649) (@ZeliardM) - Add Tapo C460 support [\#1645](#1645) (@markvanpraet) - Add P105\(US\) device fixture [\#1644](#1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\#1643](#1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\#1607](#1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\#1569](#1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\#1568](#1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\#1545](#1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\#1539](#1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\#1538](#1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\#1515](#1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\#1509](#1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\#1517](#1517) - docs: modernize docstrings across the repository [\#1682](#1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\#1512](#1512) (@rytilahti) **Project maintenance:** - Fix PyPI publishing for packages with metadata 2.5 [\#1779](#1779) (@rytilahti) - tests: add type annotations to top-level test files [\#1688](#1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\#1687](#1687) (@ZeliardM) - tests: add type annotations to Smart tests [\#1686](#1686) (@ZeliardM) - tests: add type annotations to IoT tests [\#1685](#1685) (@ZeliardM) - tests: add type annotations to transport tests [\#1684](#1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\#1683](#1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\#1681](#1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\#1677](#1677) (@ZeliardM) - Update GitHub Workflows and Actions [\#1622](#1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\#1587](#1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\#1585](#1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\#1597](#1597) - HS300 Child State - Time Module Error [\#1445](#1445)
pillarsdotnet
pushed a commit
to pillarsdotnet/python-kasa
that referenced
this pull request
Oct 22, 2026
Signed-off-by: Lilly Rose Berner <[email protected]>
pillarsdotnet
pushed a commit
to pillarsdotnet/python-kasa
that referenced
this pull request
Oct 30, 2026
## [0.11.0](https://github.com/python-kasa/python-kasa/tree/0.11.0) (2026-10-04) [Full Changelog](python-kasa/python-kasa@0.10.2...0.11.0) **Release summary:** This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\python-kasa#1551](python-kasa#1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\python-kasa#1771](python-kasa#1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\python-kasa#1762](python-kasa#1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\python-kasa#1757](python-kasa#1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\python-kasa#1749](python-kasa#1749) (@nopoz) - Expose the light transition state change flag [\python-kasa#1745](python-kasa#1745) (@nopoz) - Add strip segment module for configurable light strip length [\python-kasa#1744](python-kasa#1744) (@nopoz) - Add KL400L5 color temperature range [\python-kasa#1719](python-kasa#1719) (@loganrosen) - Update smartcam credential handling and tests [\python-kasa#1664](python-kasa#1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\python-kasa#1663](python-kasa#1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\python-kasa#1660](python-kasa#1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\python-kasa#1639](python-kasa#1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\python-kasa#1638](python-kasa#1638) (@ZeliardM) - Add preset support for Tapo cameras [\python-kasa#1615](python-kasa#1615) (@mrwogu) - Add python 3.14 to supported versions [\python-kasa#1599](python-kasa#1599) (@rytilahti) - Add discovery port 20004 [\python-kasa#1595](python-kasa#1595) (@alams154) - Implement IOT Time Module Failover [\python-kasa#1583](python-kasa#1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\python-kasa#1566](python-kasa#1566) (@ZeliardM) - Extend smartcam detection support [\python-kasa#1552](python-kasa#1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\python-kasa#1613](python-kasa#1613) - 'No time zone found with key EST' in debian 13 [\python-kasa#1579](python-kasa#1579) - Discovery: accept cameras that only send the encrypt\_type list [\python-kasa#1770](python-kasa#1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \python-kasa#1740\) [\python-kasa#1769](python-kasa#1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\python-kasa#1768](python-kasa#1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\python-kasa#1761](python-kasa#1761) (@juherr) - Disable multi requests on timeout during multi-request [\python-kasa#1759](python-kasa#1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\python-kasa#1755](python-kasa#1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\python-kasa#1743](python-kasa#1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\python-kasa#1731](python-kasa#1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\python-kasa#1668](python-kasa#1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\python-kasa#1667](python-kasa#1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\python-kasa#1659](python-kasa#1659) (@ZeliardM) - Fix camera login version in CLI [\python-kasa#1658](python-kasa#1658) (@ZeliardM) - Allow SSL connections to older devices [\python-kasa#1654](python-kasa#1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\python-kasa#1614](python-kasa#1614) (@rytilahti) - Add hold state to thermostatstate [\python-kasa#1609](python-kasa#1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\python-kasa#1598](python-kasa#1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\python-kasa#1588](python-kasa#1588) (@rytilahti) - Fix iotstrip child device time handling [\python-kasa#1584](python-kasa#1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\python-kasa#1760](python-kasa#1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\python-kasa#1746](python-kasa#1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\python-kasa#1726](python-kasa#1726) (@Krotu) - Add L530EA\(EU\) device fixture [\python-kasa#1694](python-kasa#1694) (@ZeliardM) - Add C101 test fixture [\python-kasa#1673](python-kasa#1673) (@ijaron) - Add LB130\(US\) device fixture [\python-kasa#1669](python-kasa#1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\python-kasa#1657](python-kasa#1657) (@ZeliardM) - Add TS15\(US\) device fixture [\python-kasa#1649](python-kasa#1649) (@ZeliardM) - Add Tapo C460 support [\python-kasa#1645](python-kasa#1645) (@markvanpraet) - Add P105\(US\) device fixture [\python-kasa#1644](python-kasa#1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\python-kasa#1643](python-kasa#1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\python-kasa#1607](python-kasa#1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\python-kasa#1569](python-kasa#1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\python-kasa#1568](python-kasa#1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\python-kasa#1545](python-kasa#1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\python-kasa#1539](python-kasa#1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\python-kasa#1538](python-kasa#1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\python-kasa#1515](python-kasa#1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\python-kasa#1509](python-kasa#1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\python-kasa#1517](python-kasa#1517) - docs: modernize docstrings across the repository [\python-kasa#1682](python-kasa#1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\python-kasa#1512](python-kasa#1512) (@rytilahti) **Project maintenance:** - tests: add type annotations to top-level test files [\python-kasa#1688](python-kasa#1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\python-kasa#1687](python-kasa#1687) (@ZeliardM) - tests: add type annotations to Smart tests [\python-kasa#1686](python-kasa#1686) (@ZeliardM) - tests: add type annotations to IoT tests [\python-kasa#1685](python-kasa#1685) (@ZeliardM) - tests: add type annotations to transport tests [\python-kasa#1684](python-kasa#1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\python-kasa#1683](python-kasa#1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\python-kasa#1681](python-kasa#1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\python-kasa#1677](python-kasa#1677) (@ZeliardM) - Update GitHub Workflows and Actions [\python-kasa#1622](python-kasa#1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\python-kasa#1587](python-kasa#1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\python-kasa#1585](python-kasa#1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\python-kasa#1597](python-kasa#1597) - HS300 Child State - Time Module Error [\python-kasa#1445](python-kasa#1445)
pillarsdotnet
pushed a commit
to pillarsdotnet/python-kasa
that referenced
this pull request
Oct 30, 2026
## [0.11.0.1](https://github.com/python-kasa/python-kasa/tree/0.11.0.1) (2026-10-04) [Full Changelog](python-kasa/python-kasa@0.10.2...0.11.0.1) **Release summary:** *Note: 0.11.0 was tagged but never published to PyPI due to a packaging issue. 0.11.0.1 contains the same changes plus a fix for the release workflow.* This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\python-kasa#1551](python-kasa#1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\python-kasa#1771](python-kasa#1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\python-kasa#1762](python-kasa#1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\python-kasa#1757](python-kasa#1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\python-kasa#1749](python-kasa#1749) (@nopoz) - Expose the light transition state change flag [\python-kasa#1745](python-kasa#1745) (@nopoz) - Add strip segment module for configurable light strip length [\python-kasa#1744](python-kasa#1744) (@nopoz) - Add KL400L5 color temperature range [\python-kasa#1719](python-kasa#1719) (@loganrosen) - Update smartcam credential handling and tests [\python-kasa#1664](python-kasa#1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\python-kasa#1663](python-kasa#1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\python-kasa#1660](python-kasa#1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\python-kasa#1639](python-kasa#1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\python-kasa#1638](python-kasa#1638) (@ZeliardM) - Add preset support for Tapo cameras [\python-kasa#1615](python-kasa#1615) (@mrwogu) - Add python 3.14 to supported versions [\python-kasa#1599](python-kasa#1599) (@rytilahti) - Add discovery port 20004 [\python-kasa#1595](python-kasa#1595) (@alams154) - Implement IOT Time Module Failover [\python-kasa#1583](python-kasa#1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\python-kasa#1566](python-kasa#1566) (@ZeliardM) - Extend smartcam detection support [\python-kasa#1552](python-kasa#1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\python-kasa#1613](python-kasa#1613) - 'No time zone found with key EST' in debian 13 [\python-kasa#1579](python-kasa#1579) - Discovery: accept cameras that only send the encrypt\_type list [\python-kasa#1770](python-kasa#1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \python-kasa#1740\) [\python-kasa#1769](python-kasa#1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\python-kasa#1768](python-kasa#1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\python-kasa#1761](python-kasa#1761) (@juherr) - Disable multi requests on timeout during multi-request [\python-kasa#1759](python-kasa#1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\python-kasa#1755](python-kasa#1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\python-kasa#1743](python-kasa#1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\python-kasa#1731](python-kasa#1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\python-kasa#1668](python-kasa#1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\python-kasa#1667](python-kasa#1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\python-kasa#1659](python-kasa#1659) (@ZeliardM) - Fix camera login version in CLI [\python-kasa#1658](python-kasa#1658) (@ZeliardM) - Allow SSL connections to older devices [\python-kasa#1654](python-kasa#1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\python-kasa#1614](python-kasa#1614) (@rytilahti) - Add hold state to thermostatstate [\python-kasa#1609](python-kasa#1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\python-kasa#1598](python-kasa#1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\python-kasa#1588](python-kasa#1588) (@rytilahti) - Fix iotstrip child device time handling [\python-kasa#1584](python-kasa#1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\python-kasa#1760](python-kasa#1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\python-kasa#1746](python-kasa#1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\python-kasa#1726](python-kasa#1726) (@Krotu) - Add L530EA\(EU\) device fixture [\python-kasa#1694](python-kasa#1694) (@ZeliardM) - Add C101 test fixture [\python-kasa#1673](python-kasa#1673) (@ijaron) - Add LB130\(US\) device fixture [\python-kasa#1669](python-kasa#1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\python-kasa#1657](python-kasa#1657) (@ZeliardM) - Add TS15\(US\) device fixture [\python-kasa#1649](python-kasa#1649) (@ZeliardM) - Add Tapo C460 support [\python-kasa#1645](python-kasa#1645) (@markvanpraet) - Add P105\(US\) device fixture [\python-kasa#1644](python-kasa#1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\python-kasa#1643](python-kasa#1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\python-kasa#1607](python-kasa#1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\python-kasa#1569](python-kasa#1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\python-kasa#1568](python-kasa#1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\python-kasa#1545](python-kasa#1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\python-kasa#1539](python-kasa#1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\python-kasa#1538](python-kasa#1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\python-kasa#1515](python-kasa#1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\python-kasa#1509](python-kasa#1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\python-kasa#1517](python-kasa#1517) - docs: modernize docstrings across the repository [\python-kasa#1682](python-kasa#1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\python-kasa#1512](python-kasa#1512) (@rytilahti) **Project maintenance:** - Fix PyPI publishing for packages with metadata 2.5 [\python-kasa#1779](python-kasa#1779) (@rytilahti) - tests: add type annotations to top-level test files [\python-kasa#1688](python-kasa#1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\python-kasa#1687](python-kasa#1687) (@ZeliardM) - tests: add type annotations to Smart tests [\python-kasa#1686](python-kasa#1686) (@ZeliardM) - tests: add type annotations to IoT tests [\python-kasa#1685](python-kasa#1685) (@ZeliardM) - tests: add type annotations to transport tests [\python-kasa#1684](python-kasa#1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\python-kasa#1683](python-kasa#1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\python-kasa#1681](python-kasa#1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\python-kasa#1677](python-kasa#1677) (@ZeliardM) - Update GitHub Workflows and Actions [\python-kasa#1622](python-kasa#1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\python-kasa#1587](python-kasa#1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\python-kasa#1585](python-kasa#1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\python-kasa#1597](python-kasa#1597) - HS300 Child State - Time Module Error [\python-kasa#1445](python-kasa#1445)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Reviewers
Uh oh!
There was an error while loading. Please reload this page.
Assignees
No one assignedLabels
new device
New device supported due to fixture being added
Projects
Milestone
No milestoneDevelopment
Successfully merging this pull request may close these issues.
Uh oh!
There was an error while loading. Please reload this page.
3 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Best viewed with Netscape Navigator 4.7 or Internet Explorer 6 at 800×600. No cookies required.