GeezerVisonThe World Wide Web, restored to 800 pixels of glory. | |
| Home|About|Gaming cabinet|Archives|How it works|Starter sites | |
GeezerVison is showing github.com — Add strip segment module for configurable light strip length by nopoz · Pull Request #1744 · python-kasa/python-kasa Conversation
|
Codecov Report✅ All modified and coverable lines are covered by tests. Additional details and impacted files@@ Coverage Diff @@ ## master #1744 +/- ## ========================================== + Coverage 93.29% 93.32% +0.03% ========================================== Files 157 159 +2 Lines 9932 9996 +64 Branches 1022 1026 +4 ========================================== + Hits 9266 9329 +63 - Misses 471 472 +1 Partials 195 195 ☔ View full report in Codecov by Harness. 🚀 New features to boost your workflow:
|
All reactions
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
rytilahti
requested changes
Sep 18, 2026
rytilahti
left a comment
Member
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
Looks good to me, thanks @nopoz! Could you please rename this to be something more explicit for light strips? How does LightStripSegment sound for you?
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
All reactions
Uh oh!
There was an error while loading. Please reload this page.
Light strips expose a `segment` component that sets how much of the strip is physically installed, shown as "Light Strip Length" in the Tapo app. It was advertised in component_nego but had no module, so the setting was unavailable. The device reports the value via get_device_segment and accepts set_device_segment. A run is addressed in 10cm segments up to 5m, giving a maximum of 50. That maximum is not discoverable: it is absent from sys_info, get_device_info and the component descriptor, and larger values are only rejected with PARAMS_ERROR, so it is defined as a constant. Products shipping multiple spools drive every run from this single value, so the limit is per-run rather than per-model. All six existing strip fixtures (L920-5 and L930-5, both regions) report 50, and a physical L920 was verified at 47 segments against a 4.7m run.
nopoz
force-pushed
the
feature/strip-segment-module
branch
from
September 19, 2026 19:22
a70bf9a to
307644e
Compare
rytilahti
approved these changes
Oct 4, 2026
rytilahti
left a comment
Member
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
Thanks @nopoz, let's merge it! 👍
Sorry, something went wrong.
Uh oh!
There was an error while loading. Please reload this page.
All reactions
Uh oh!
There was an error while loading. Please reload this page.
Merged
rytilahti
added a commit
that referenced
this pull request
Oct 4, 2026
## [0.11.0](https://github.com/python-kasa/python-kasa/tree/0.11.0) (2026-10-04) [Full Changelog](0.10.2...0.11.0) **Release summary:** This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\#1551](#1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\#1771](#1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\#1762](#1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\#1757](#1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\#1749](#1749) (@nopoz) - Expose the light transition state change flag [\#1745](#1745) (@nopoz) - Add strip segment module for configurable light strip length [\#1744](#1744) (@nopoz) - Add KL400L5 color temperature range [\#1719](#1719) (@loganrosen) - Update smartcam credential handling and tests [\#1664](#1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\#1663](#1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\#1660](#1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\#1639](#1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\#1638](#1638) (@ZeliardM) - Add preset support for Tapo cameras [\#1615](#1615) (@mrwogu) - Add python 3.14 to supported versions [\#1599](#1599) (@rytilahti) - Add discovery port 20004 [\#1595](#1595) (@alams154) - Implement IOT Time Module Failover [\#1583](#1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\#1566](#1566) (@ZeliardM) - Extend smartcam detection support [\#1552](#1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\#1613](#1613) - 'No time zone found with key EST' in debian 13 [\#1579](#1579) - Discovery: accept cameras that only send the encrypt\_type list [\#1770](#1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \#1740\) [\#1769](#1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\#1768](#1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\#1761](#1761) (@juherr) - Disable multi requests on timeout during multi-request [\#1759](#1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\#1755](#1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\#1743](#1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\#1731](#1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\#1668](#1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\#1667](#1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\#1659](#1659) (@ZeliardM) - Fix camera login version in CLI [\#1658](#1658) (@ZeliardM) - Allow SSL connections to older devices [\#1654](#1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\#1614](#1614) (@rytilahti) - Add hold state to thermostatstate [\#1609](#1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\#1598](#1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\#1588](#1588) (@rytilahti) - Fix iotstrip child device time handling [\#1584](#1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\#1760](#1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\#1746](#1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\#1726](#1726) (@Krotu) - Add L530EA\(EU\) device fixture [\#1694](#1694) (@ZeliardM) - Add C101 test fixture [\#1673](#1673) (@ijaron) - Add LB130\(US\) device fixture [\#1669](#1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\#1657](#1657) (@ZeliardM) - Add TS15\(US\) device fixture [\#1649](#1649) (@ZeliardM) - Add Tapo C460 support [\#1645](#1645) (@markvanpraet) - Add P105\(US\) device fixture [\#1644](#1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\#1643](#1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\#1607](#1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\#1569](#1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\#1568](#1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\#1545](#1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\#1539](#1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\#1538](#1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\#1515](#1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\#1509](#1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\#1517](#1517) - docs: modernize docstrings across the repository [\#1682](#1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\#1512](#1512) (@rytilahti) **Project maintenance:** - tests: add type annotations to top-level test files [\#1688](#1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\#1687](#1687) (@ZeliardM) - tests: add type annotations to Smart tests [\#1686](#1686) (@ZeliardM) - tests: add type annotations to IoT tests [\#1685](#1685) (@ZeliardM) - tests: add type annotations to transport tests [\#1684](#1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\#1683](#1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\#1681](#1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\#1677](#1677) (@ZeliardM) - Update GitHub Workflows and Actions [\#1622](#1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\#1587](#1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\#1585](#1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\#1597](#1597) - HS300 Child State - Time Module Error [\#1445](#1445)
Merged
rytilahti
added a commit
that referenced
this pull request
Oct 4, 2026
## [0.11.0.1](https://github.com/python-kasa/python-kasa/tree/0.11.0.1) (2026-10-04) [Full Changelog](0.10.2...0.11.0.1) **Release summary:** *Note: 0.11.0 was tagged but never published to PyPI due to a packaging issue. 0.11.0.1 contains the same changes plus a fix for the release workflow.* This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\#1551](#1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\#1771](#1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\#1762](#1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\#1757](#1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\#1749](#1749) (@nopoz) - Expose the light transition state change flag [\#1745](#1745) (@nopoz) - Add strip segment module for configurable light strip length [\#1744](#1744) (@nopoz) - Add KL400L5 color temperature range [\#1719](#1719) (@loganrosen) - Update smartcam credential handling and tests [\#1664](#1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\#1663](#1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\#1660](#1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\#1639](#1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\#1638](#1638) (@ZeliardM) - Add preset support for Tapo cameras [\#1615](#1615) (@mrwogu) - Add python 3.14 to supported versions [\#1599](#1599) (@rytilahti) - Add discovery port 20004 [\#1595](#1595) (@alams154) - Implement IOT Time Module Failover [\#1583](#1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\#1566](#1566) (@ZeliardM) - Extend smartcam detection support [\#1552](#1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\#1613](#1613) - 'No time zone found with key EST' in debian 13 [\#1579](#1579) - Discovery: accept cameras that only send the encrypt\_type list [\#1770](#1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \#1740\) [\#1769](#1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\#1768](#1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\#1761](#1761) (@juherr) - Disable multi requests on timeout during multi-request [\#1759](#1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\#1755](#1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\#1743](#1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\#1731](#1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\#1668](#1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\#1667](#1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\#1659](#1659) (@ZeliardM) - Fix camera login version in CLI [\#1658](#1658) (@ZeliardM) - Allow SSL connections to older devices [\#1654](#1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\#1614](#1614) (@rytilahti) - Add hold state to thermostatstate [\#1609](#1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\#1598](#1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\#1588](#1588) (@rytilahti) - Fix iotstrip child device time handling [\#1584](#1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\#1760](#1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\#1746](#1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\#1726](#1726) (@Krotu) - Add L530EA\(EU\) device fixture [\#1694](#1694) (@ZeliardM) - Add C101 test fixture [\#1673](#1673) (@ijaron) - Add LB130\(US\) device fixture [\#1669](#1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\#1657](#1657) (@ZeliardM) - Add TS15\(US\) device fixture [\#1649](#1649) (@ZeliardM) - Add Tapo C460 support [\#1645](#1645) (@markvanpraet) - Add P105\(US\) device fixture [\#1644](#1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\#1643](#1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\#1607](#1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\#1569](#1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\#1568](#1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\#1545](#1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\#1539](#1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\#1538](#1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\#1515](#1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\#1509](#1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\#1517](#1517) - docs: modernize docstrings across the repository [\#1682](#1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\#1512](#1512) (@rytilahti) **Project maintenance:** - Fix PyPI publishing for packages with metadata 2.5 [\#1779](#1779) (@rytilahti) - tests: add type annotations to top-level test files [\#1688](#1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\#1687](#1687) (@ZeliardM) - tests: add type annotations to Smart tests [\#1686](#1686) (@ZeliardM) - tests: add type annotations to IoT tests [\#1685](#1685) (@ZeliardM) - tests: add type annotations to transport tests [\#1684](#1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\#1683](#1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\#1681](#1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\#1677](#1677) (@ZeliardM) - Update GitHub Workflows and Actions [\#1622](#1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\#1587](#1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\#1585](#1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\#1597](#1597) - HS300 Child State - Time Module Error [\#1445](#1445)
pillarsdotnet
pushed a commit
to pillarsdotnet/python-kasa
that referenced
this pull request
Oct 30, 2026
…kasa#1744) A light strip can be cut shorter than it ships, and the device has to be told how much of it is actually there so effects and colours span the right distance. The Tapo app exposes this as "Light Strip Length". python-kasa has no way to read or change it, so the setting is missing from Home Assistant. This change exposes a new feature backed by `segment` component: - add a `Segment` module: `REQUIRED_COMPONENT = "segment"`, `QUERY_GETTER_NAME = "get_device_segment"` - expose one Number feature, `strip_segments`, range 0-50, `Category.Config` - add a `segments` property and `set_segments()`, which writes `set_device_segment`
pillarsdotnet
pushed a commit
to pillarsdotnet/python-kasa
that referenced
this pull request
Oct 30, 2026
## [0.11.0](https://github.com/python-kasa/python-kasa/tree/0.11.0) (2026-10-04) [Full Changelog](python-kasa/python-kasa@0.10.2...0.11.0) **Release summary:** This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\python-kasa#1551](python-kasa#1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\python-kasa#1771](python-kasa#1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\python-kasa#1762](python-kasa#1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\python-kasa#1757](python-kasa#1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\python-kasa#1749](python-kasa#1749) (@nopoz) - Expose the light transition state change flag [\python-kasa#1745](python-kasa#1745) (@nopoz) - Add strip segment module for configurable light strip length [\python-kasa#1744](python-kasa#1744) (@nopoz) - Add KL400L5 color temperature range [\python-kasa#1719](python-kasa#1719) (@loganrosen) - Update smartcam credential handling and tests [\python-kasa#1664](python-kasa#1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\python-kasa#1663](python-kasa#1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\python-kasa#1660](python-kasa#1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\python-kasa#1639](python-kasa#1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\python-kasa#1638](python-kasa#1638) (@ZeliardM) - Add preset support for Tapo cameras [\python-kasa#1615](python-kasa#1615) (@mrwogu) - Add python 3.14 to supported versions [\python-kasa#1599](python-kasa#1599) (@rytilahti) - Add discovery port 20004 [\python-kasa#1595](python-kasa#1595) (@alams154) - Implement IOT Time Module Failover [\python-kasa#1583](python-kasa#1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\python-kasa#1566](python-kasa#1566) (@ZeliardM) - Extend smartcam detection support [\python-kasa#1552](python-kasa#1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\python-kasa#1613](python-kasa#1613) - 'No time zone found with key EST' in debian 13 [\python-kasa#1579](python-kasa#1579) - Discovery: accept cameras that only send the encrypt\_type list [\python-kasa#1770](python-kasa#1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \python-kasa#1740\) [\python-kasa#1769](python-kasa#1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\python-kasa#1768](python-kasa#1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\python-kasa#1761](python-kasa#1761) (@juherr) - Disable multi requests on timeout during multi-request [\python-kasa#1759](python-kasa#1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\python-kasa#1755](python-kasa#1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\python-kasa#1743](python-kasa#1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\python-kasa#1731](python-kasa#1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\python-kasa#1668](python-kasa#1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\python-kasa#1667](python-kasa#1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\python-kasa#1659](python-kasa#1659) (@ZeliardM) - Fix camera login version in CLI [\python-kasa#1658](python-kasa#1658) (@ZeliardM) - Allow SSL connections to older devices [\python-kasa#1654](python-kasa#1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\python-kasa#1614](python-kasa#1614) (@rytilahti) - Add hold state to thermostatstate [\python-kasa#1609](python-kasa#1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\python-kasa#1598](python-kasa#1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\python-kasa#1588](python-kasa#1588) (@rytilahti) - Fix iotstrip child device time handling [\python-kasa#1584](python-kasa#1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\python-kasa#1760](python-kasa#1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\python-kasa#1746](python-kasa#1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\python-kasa#1726](python-kasa#1726) (@Krotu) - Add L530EA\(EU\) device fixture [\python-kasa#1694](python-kasa#1694) (@ZeliardM) - Add C101 test fixture [\python-kasa#1673](python-kasa#1673) (@ijaron) - Add LB130\(US\) device fixture [\python-kasa#1669](python-kasa#1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\python-kasa#1657](python-kasa#1657) (@ZeliardM) - Add TS15\(US\) device fixture [\python-kasa#1649](python-kasa#1649) (@ZeliardM) - Add Tapo C460 support [\python-kasa#1645](python-kasa#1645) (@markvanpraet) - Add P105\(US\) device fixture [\python-kasa#1644](python-kasa#1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\python-kasa#1643](python-kasa#1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\python-kasa#1607](python-kasa#1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\python-kasa#1569](python-kasa#1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\python-kasa#1568](python-kasa#1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\python-kasa#1545](python-kasa#1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\python-kasa#1539](python-kasa#1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\python-kasa#1538](python-kasa#1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\python-kasa#1515](python-kasa#1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\python-kasa#1509](python-kasa#1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\python-kasa#1517](python-kasa#1517) - docs: modernize docstrings across the repository [\python-kasa#1682](python-kasa#1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\python-kasa#1512](python-kasa#1512) (@rytilahti) **Project maintenance:** - tests: add type annotations to top-level test files [\python-kasa#1688](python-kasa#1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\python-kasa#1687](python-kasa#1687) (@ZeliardM) - tests: add type annotations to Smart tests [\python-kasa#1686](python-kasa#1686) (@ZeliardM) - tests: add type annotations to IoT tests [\python-kasa#1685](python-kasa#1685) (@ZeliardM) - tests: add type annotations to transport tests [\python-kasa#1684](python-kasa#1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\python-kasa#1683](python-kasa#1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\python-kasa#1681](python-kasa#1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\python-kasa#1677](python-kasa#1677) (@ZeliardM) - Update GitHub Workflows and Actions [\python-kasa#1622](python-kasa#1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\python-kasa#1587](python-kasa#1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\python-kasa#1585](python-kasa#1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\python-kasa#1597](python-kasa#1597) - HS300 Child State - Time Module Error [\python-kasa#1445](python-kasa#1445)
pillarsdotnet
pushed a commit
to pillarsdotnet/python-kasa
that referenced
this pull request
Oct 30, 2026
## [0.11.0.1](https://github.com/python-kasa/python-kasa/tree/0.11.0.1) (2026-10-04) [Full Changelog](python-kasa/python-kasa@0.10.2...0.11.0.1) **Release summary:** *Note: 0.11.0 was tagged but never published to PyPI due to a packaging issue. 0.11.0.1 contains the same changes plus a fix for the release workflow.* This is a huge and long overdue release, coming more than a year and a half after the previous one. Hopefully the next one follows sooner, as the TPAP transport (which did not make it into this release) is used more and more on newer devices. This release brings broader camera support, new modules for lights, vacuums and cameras, and many connectivity fixes for newer firmware versions. Some other highlights: - Improved Tapo camera support: login version 3, presets, wifi handling, last alert detection, and more robust authentication and discovery. - Selective room cleaning for robot vacuums. - Configurable light strip length via the new strip segment module, and an exposed light transition state change flag. - Basic HomeKit module for Kasa (iot) devices. - Energy monitoring V2 support (S515D). - Better hub and thermostat state reporting (hold, summer mode, low battery). - Connection fixes for newer Tapo firmware and older SSL devices, plus KLAP v2 for iot devices. - More resilient time handling, with failover and UTC fallback for iot devices. - Python 3.14 is now supported. - Inclusion of fixtures for 29 devices or firmware versions, including the Tapo C460, C200 and C101 cameras and the KH100 hub with KE100/KE110 thermostats. **Thank you to all contributors!** A big thank you to everyone who contributed to this release, whether through code, device fixtures, bug reports or testing. Special thanks to @ZeliardM for a huge effort on both features and project maintenance, including but not limited to: - Features like the HomeKit module for iot devices, iot time module failover, wifi handling and credential improvements for cameras, Tapo login version 3, and V2 energy monitoring for S515D. - A lot of necessary maintenance work including type annotations and cleanups throughout the test suite, modernized docstrings, CI hardening with SHA-pinned actions, and many bug fixes. This helps us to keep the library maintainable and open to new contributions. A warm welcome to our new contributors, with special thanks to those who contributed improvements and fixes: - @alams154: discovery on port 20004 - @bluntman001: iot device classification fix - @bm1549: KLAP v2 transport for iot devices - @darylldelfin: cipher support for newer Tapo firmware - @davidefiocco: vacuum mop water level fix - @epg-pers: selective room cleaning for vacuums - @freeKC: camera discovery and authentication fixes - @gpongelli: extended camera detection - @Ikstar: KL420 color temperature range - @juherr: last alert detection module for cameras, camera error codes and a C200 fixture - @kad: SSL connections to older devices - @KaloyanNaumov: multi-request timeout handling - @loganrosen: KL400L5 color temperature range - @markvanpraet: Tapo C460 support and camera battery fix - @monteccarlos: iot timezone mapping fix - @mrwogu: preset support for Tapo cameras - @nopoz: strip segment module, light transition flag and credentials hash fix - @tk1475: UTC fallback for unset iot device clocks - @wh1t3f1r3: non-retryable network error handling Thanks also to our new contributors who provided device fixtures to help future development efforts: @emanueleg, @fantandrea, @HarryPehkonen, @ijaron, @Krotu, @LostLuma, @mjbohr and @TheLinuxGuy. **This release in numbers:** - 68 merged pull requests from 29 contributors, 27 of them first-time contributors - 8 new modules - 29 new device fixtures - 203 files changed, with 25,199 lines added and 2,585 removed **Implemented enhancements:** - \[Feature Request\] C220 camera line crossing detection on-off switch [\python-kasa#1551](python-kasa#1551) - SslAesTransport: handshake again when a camera answers 401 to passthrough [\python-kasa#1771](python-kasa#1771) (@freeKC) - Add LastAlertDetection module for smartcam devices [\python-kasa#1762](python-kasa#1762) (@juherr) - Add KL420 to TPLINK\_KELVIN color temperature ranges [\python-kasa#1757](python-kasa#1757) (@Ikstar) - Do not authenticate with a credentials\_hash from a different transport [\python-kasa#1749](python-kasa#1749) (@nopoz) - Expose the light transition state change flag [\python-kasa#1745](python-kasa#1745) (@nopoz) - Add strip segment module for configurable light strip length [\python-kasa#1744](python-kasa#1744) (@nopoz) - Add KL400L5 color temperature range [\python-kasa#1719](python-kasa#1719) (@loganrosen) - Update smartcam credential handling and tests [\python-kasa#1664](python-kasa#1664) (@ZeliardM) - Add support for V2 Energy Monitoring for S515D [\python-kasa#1663](python-kasa#1663) (@ZeliardM) - Add selective room cleaning to vacuum clean module [\python-kasa#1660](python-kasa#1660) (@epg-pers) - New Wi-Fi handling for SMARTCAM devices [\python-kasa#1639](python-kasa#1639) (@ZeliardM) - Add support for tapo login\_version 3 in sslaestransport [\python-kasa#1638](python-kasa#1638) (@ZeliardM) - Add preset support for Tapo cameras [\python-kasa#1615](python-kasa#1615) (@mrwogu) - Add python 3.14 to supported versions [\python-kasa#1599](python-kasa#1599) (@rytilahti) - Add discovery port 20004 [\python-kasa#1595](python-kasa#1595) (@alams154) - Implement IOT Time Module Failover [\python-kasa#1583](python-kasa#1583) (@ZeliardM) - Add bare bones homekit module for iot devices [\python-kasa#1566](python-kasa#1566) (@ZeliardM) - Extend smartcam detection support [\python-kasa#1552](python-kasa#1552) (@gpongelli) **Fixed bugs:** - Time module unavailable for waterleak sensor [\python-kasa#1613](python-kasa#1613) - 'No time zone found with key EST' in debian 13 [\python-kasa#1579](python-kasa#1579) - Discovery: accept cameras that only send the encrypt\_type list [\python-kasa#1770](python-kasa#1770) (@freeKC) - Classify IOT devices via sysinfo regardless of transport \(fixes \python-kasa#1740\) [\python-kasa#1769](python-kasa#1769) (@bluntman001) - Fall back to UTC for iot time when the device clock is not set [\python-kasa#1768](python-kasa#1768) (@tk1475) - Add UNKNOWN\_USERNAME \(-60502\) camera error code [\python-kasa#1761](python-kasa#1761) (@juherr) - Disable multi requests on timeout during multi-request [\python-kasa#1759](python-kasa#1759) (@KaloyanNaumov) - Add ECDHE-RSA-AES256 cipher for newer Tapo firmware [\python-kasa#1755](python-kasa#1755) (@darylldelfin) - Map iot timezone index 18 to America/New\_York instead of EST [\python-kasa#1743](python-kasa#1743) (@monteccarlos) - fix: use KLAP v2 transport for IOT devices with login version 2 [\python-kasa#1731](python-kasa#1731) (@bm1549) - Add ENETUNREACH to non-retryable errors in XorTransport [\python-kasa#1668](python-kasa#1668) (@wh1t3f1r3) - Fix mop set\_waterlevel sending setCleanAttr without type field [\python-kasa#1667](python-kasa#1667) (@davidefiocco) - Fix SMARTCAM Time module and update tests [\python-kasa#1659](python-kasa#1659) (@ZeliardM) - Fix camera login version in CLI [\python-kasa#1658](python-kasa#1658) (@ZeliardM) - Allow SSL connections to older devices [\python-kasa#1654](python-kasa#1654) (@kad) - waterleaksensor: use parent's Time for alert timestamp [\python-kasa#1614](python-kasa#1614) (@rytilahti) - Add hold state to thermostatstate [\python-kasa#1609](python-kasa#1609) (@rytilahti) - Fix thermostat idle reporting on low battery [\python-kasa#1598](python-kasa#1598) (@rytilahti) - Add shutdown \(summer mode\) to thermostatstate [\python-kasa#1588](python-kasa#1588) (@rytilahti) - Fix iotstrip child device time handling [\python-kasa#1584](python-kasa#1584) (@ZeliardM) **Added support for devices:** - Add C200 device fixture [\python-kasa#1760](python-kasa#1760) (@juherr) - Add P125M fixture for firmware 1.4.4 [\python-kasa#1746](python-kasa#1746) (@HarryPehkonen) - Add fixtures for KH100, KE100 and KE110 and simulate TRV states [\python-kasa#1726](python-kasa#1726) (@Krotu) - Add L530EA\(EU\) device fixture [\python-kasa#1694](python-kasa#1694) (@ZeliardM) - Add C101 test fixture [\python-kasa#1673](python-kasa#1673) (@ijaron) - Add LB130\(US\) device fixture [\python-kasa#1669](python-kasa#1669) (@ZeliardM) - Add KL110B\(UN\) device fixture [\python-kasa#1657](python-kasa#1657) (@ZeliardM) - Add TS15\(US\) device fixture [\python-kasa#1649](python-kasa#1649) (@ZeliardM) - Add Tapo C460 support [\python-kasa#1645](python-kasa#1645) (@markvanpraet) - Add P105\(US\) device fixture [\python-kasa#1644](python-kasa#1644) (@ZeliardM) - Add L430C\(EU\) device fixture [\python-kasa#1643](python-kasa#1643) (@ZeliardM) - Add L430P\(EU\) device fixture [\python-kasa#1607](python-kasa#1607) (@LostLuma) - Add S500\(US\)\_1.0\_1.2.0 fixture [\python-kasa#1569](python-kasa#1569) (@ZeliardM) - Add device fixture for P316M\(US\) [\python-kasa#1568](python-kasa#1568) (@TheLinuxGuy) - Add L535E\(EU\) 3.0 1.1.8 fixture [\python-kasa#1545](python-kasa#1545) (@fantandrea) - Adding KL400L10\(US\)\_1.0\_1.0.10 fixture [\python-kasa#1539](python-kasa#1539) (@mjbohr) - Add TP10\(IT\) 1.0 1.2.5 fixture [\python-kasa#1538](python-kasa#1538) (@emanueleg) - Add LB100\(US\)\_1.0\_1.8.11 fixture file [\python-kasa#1515](python-kasa#1515) (@ZeliardM) - Add KS225\(US\)\_1.0\_1.1.1 and L930-5\(EU\)\_1.0\_1.2.5 [\python-kasa#1509](python-kasa#1509) (@ZeliardM) **Documentation updates:** - How to hash credentials to make use of --credentials-hash flag? [\python-kasa#1517](python-kasa#1517) - docs: modernize docstrings across the repository [\python-kasa#1682](python-kasa#1682) (@ZeliardM) - Add a note to emeter guide being kasa-only [\python-kasa#1512](python-kasa#1512) (@rytilahti) **Project maintenance:** - Fix PyPI publishing for packages with metadata 2.5 [\python-kasa#1779](python-kasa#1779) (@rytilahti) - tests: add type annotations to top-level test files [\python-kasa#1688](python-kasa#1688) (@ZeliardM) - tests: add type annotations to CLI, protocol, and smartcam tests [\python-kasa#1687](python-kasa#1687) (@ZeliardM) - tests: add type annotations to Smart tests [\python-kasa#1686](python-kasa#1686) (@ZeliardM) - tests: add type annotations to IoT tests [\python-kasa#1685](python-kasa#1685) (@ZeliardM) - tests: add type annotations to transport tests [\python-kasa#1684](python-kasa#1684) (@ZeliardM) - tests: centralize transport and session cleanup in conftest [\python-kasa#1683](python-kasa#1683) (@ZeliardM) - ci: pin all GitHub Actions to SHA hashes and update versions [\python-kasa#1681](python-kasa#1681) (@ZeliardM) - tests: fix typos, child device subtype, CLI patch path, and deprecation test logic [\python-kasa#1677](python-kasa#1677) (@ZeliardM) - Update GitHub Workflows and Actions [\python-kasa#1622](python-kasa#1622) (@ZeliardM) - Use log-level debug for smartdevice query error reporting [\python-kasa#1587](python-kasa#1587) (@rytilahti) - Use Device instead of SmartDevice where feasible [\python-kasa#1585](python-kasa#1585) (@ZeliardM) **Closed issues:** - Python 3.14 Support [\python-kasa#1597](python-kasa#1597) - HS300 Child State - Time Module Error [\python-kasa#1445](python-kasa#1445)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Reviewers
Uh oh!
There was an error while loading. Please reload this page.
Assignees
No one assignedLabels
enhancement
New feature or request
Projects
Milestone
No milestoneDevelopment
Successfully merging this pull request may close these issues.
Uh oh!
There was an error while loading. Please reload this page.
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Best viewed with Netscape Navigator 4.7 or Internet Explorer 6 at 800×600. No cookies required.